• 제목/요약/키워드: SCS method

검색결과 1,131건 처리시간 0.031초

국내기존 합성단위유량도 비교분석 (Comparative Analysis of Existing Synthetic Unit Hydrograph in Korea)

  • 전시영
    • 물과 미래
    • /
    • 제27권2호
    • /
    • pp.97-109
    • /
    • 1994
  • 우리나라 22개의 유역에 대한 SCS 및 Nakayasu 형 합성단위유량도의 매개변수는 대표단위유량도를 이용한 회귀분석으로부터 유도되며, 이들로부터 구한 합성단위유량도와 대표단위유량도를 비교하였다. 이들 중 선정된 4개 유역의 합성단위유량도는 건설기술연구원에서 제안한 Snyder 및 HYMO의 합성단위유량도와 비교하였다. SCS 방법에서 수계별보다는 전체 유역으로 회귀분석한 지체시간으로부터 추정된 합성단위유량도의 첨두유량이 보청천유역을 제외하고 대표단위유량도의 첨두유량값을 개선하였으며, 첨두시간은 이와 반대로 나타났다. 수정 Nakayasu 형에서 전체 유역보다는 수계별로 회귀분석한 지체시간으로부터 추정된 합성단위유량도가 위천유역을 제외하고 Nakayasu의 합성단위유량도보다는 대표단위유량도에 비교적 접근하였다. 수정 Nakayasu 형의 합성단위유량도는 전체 유역과 수계별에서 Nakayasu의 합성단위유량도보다는 대표단위유량도를 훨씬 더 잘 나타낸다는 것을 알 수 있다.

  • PDF

$SCS6/Si_3N_4$ 연속섬유강화 세라믹 복합재료의 기계적 거동 및 파괴저항평가 (Mechanical Behavior and Fracture Resistance of $SCS6/Si_3N_4$ CFCCs)

  • 윤유성;권오헌
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.658-662
    • /
    • 2001
  • Continuous fiber ceramic composites(CPCCs) having the advantages of ceramics resistance to heat, eroson can be applied in chemical reactors and engine. CFCCs has relatively high stiffness in spite of low weight. In particular, it exhibits greatly increased toughness, which serves to decrease its inherent damage characteristics of the brittle nature of monolithic ceramics. In this wort, tensile and flexural test for SCS6 fiber/ $Si_3N_4$ matrix composites were studied. An objective of this study is to obtain the basic quantities of mechanical properties for tension and flexural test and link these to the fracture resistance behavior. Then, we showed that wok of fracture concept was useful as a method for describing fracture restance behavior of CFCCs.

  • PDF

원격탐사 기법에 의한 소유역의 홍수 수문곡선 결정 (Determination of Flood Hydrograph by Remote Sensing Techniques in a Small Watershed)

  • 남현옥;박경윤;조성익
    • 대한원격탐사학회지
    • /
    • 제5권1호
    • /
    • pp.13-27
    • /
    • 1989
  • In recent years satellite data have been increasingly used for the analysis of floodprone areas. This study was carried out to demonstrate the usefulness of repetitive satellite imagery in monitoring flood levels of the Pyungchang watershed. Runoff characteristics parameters were analyzed by Soil Conservation Service(SCS) Runoff Curve Number(RCN) based on Landsat imagery and Digital Terrain Model data. The RCN average within the watershed was calculated from RCN estimates for all the pixels(picture elements) and adjusted by antecedent precipitation conditions. The direct runoff hydrograph was derived from the unit hydrograph using SCS dimensionless unit hydrograph and effective rainfalls estimated by the SCS method. In comparsion of the direct runoff hydrograph with the measured rating curve their peak times differ by one hour and peak discharges differ by 5.9 percents of the discharge from each other. It was shown that repetitive satellite image could be very useful in timely estimating watershed runoffs and evaluating ever-changing surface conditions of a river basin.

Evaluation of Groundwater Flow Analysis Using Rainfall-Recharge Estimation Methods

  • Choi, Yun-Yeong;Sim, Chang-Seok;Bae, Sang-Keun
    • 한국환경과학회지
    • /
    • 제16권5호
    • /
    • pp.561-569
    • /
    • 2007
  • This study used SCS-CN method to estimate the real recharge of the study area which is one of the most reasonable techniques to estimate groundwater recharge when there is no available runoff data in a watershed. From the results of tile real recharge analysis for the study area using SCS-CN method, it was analyzed that the year 1994 when the drought was severe shotted the lowest recharge of 106.3mm with recharge rate of 12.4%, and the highest recharge of 285.6mm with recharge rate of 21.8% occurred in 1990. Yearly average recharge of 213.2mm was obtained, and tile average recharge rate was 16.9%/year. KOG-FLOW model which has powerful post process functions consists of setting environments for input parameters in Korean language, and help function is added to each input data. Detailed information for each parameter is displayed when the icon is placed on the input parameters, and geologic boundaries or initial head data for each layer can be set easily on work sheet. The relative errors (R. E.) for each model's observed values and calculated values are $0.156{\sim}0.432$ in case of KOG-FLOW, and $0.451{\sim}1.175$ in case of WINFLOW, therefore it is known that KOG-FLOW model developed in this study produced results compared to observed head values.

강원도 유역의 유출 특성에 관한 연구 (소양강댐 유역 중심으로) (A Study on the Runoff Characteristics m Kangwon Watershed (So-yang River Watershed))

  • 최한규;백효선;이민섭
    • 산업기술연구
    • /
    • 제21권B호
    • /
    • pp.223-232
    • /
    • 2001
  • This study is finding the most appropriate model of kangwondo watershed. To synthesize each hydrograph, It is found to several parameters which are used in existing hydrographes. then the synthestic hydrograph is compared and investigated with many hydrographes of the rivers in kanwondo. These methods, Nakayasu, Clark, SCS are used to calculate the run-off of this watershed. When the calculated run-off is compared with real rating-curves, then it is found that the SCS method using the Clark's concentrantion time is the best way on this area having large watershed, long river length and gentle water slope, the Nakayasu method is more suitable on this area having small watershed, short river length and steep water slope. Also it is founded from analyzing run-off hydrographes, peak run-off and peak time that the Clark's method applied Kirpich's concentration time way is suitable in the area of kangwondo.

  • PDF

SCS 유출곡선지수법(流出曲線指數法)을 이용한 만내(灣內) 담수(淡水) 교체시간(交替時間)의 추정(推定) (Estimates of Flushing Time in a Bay using the SCS Curve Number Method)

  • 김종화;장선덕;송현구
    • 대한토목학회논문집
    • /
    • 제14권6호
    • /
    • pp.1453-1463
    • /
    • 1994
  • 항만의 단기 관측자료에 의한 해수의 수송은 조석잔차류와 바람응벽 등으로 해수의 평형상태를 유지하기 어렵다. 이로 인해 순 용적수송량이 만외로 유출되어야 함에도 불구하고 짧은 주기동안 만내로 유입됨으로써 담수 교체시간을 계산할 수 없었다. 본 연구는 1 조석 주기의 단기관측과 유역의 강우량 자료로부터 SCS의 유효강수량을 계산함으로써 담수 교체시간의 추정가능성을 검토하였다. 완전혼합을 가정하여, 여름철 마산만에 적용된 담수 교체시간은 외해수의 염분변화에 따라 10.9~15.3일로 분포하였다. 이는 여름철 마산만에서 순 용적 수송량(NVT)에 의한 평균 체류시간 13.9일에 상당히 근접된 값이다. 강한 성층을 이룬 홍수기의 경우 2층모델에 적용하면, 만구에서 교체시간은 1.2일로 추정되어 완전혼합모델에서 얻은 2.1일보다 작은 값이다. 이것은 홍수기에 유입된 담수가 대부분 상층을 통하여 만외로 유출되기 때문이다. 또 마산만에서 얻은 담수 유입량 $Q_r$과 교체시간 t와의 상관관계식을 완전혼합과 2층 모델의 2가지 조건으로 나타내었고, 이들이 비선형적 관계를 가지고 있음을 알 수 있었다. 이런 관계는 보스톤 내만에서 직접 하천 유입량을 조사한 결과와 근접된 형태를 보였다. 따라서 이 식들은 만의 흐름구조와 농도의 성층정도에 따라 달리 적용할 수 있고, 담수유입량의 변동에 의한 담수 교체시간의 예측을 가능케 한다. 그러므로 순 용적 수송량의 계산으로 구할 수 없는 단기관측자료는 SCS 유출곡선지수법에 의해 담수 교체시간의 추정이 가능할 것이다.

  • PDF

GIS를 이용한 주암호 유역의 오염부하량 산정 및 수질모의 (Calculation of Pollutant Loads and Simulation of Water Quality in Juam Lake Watershed using GIS)

  • 김철;김석규
    • 한국지리정보학회지
    • /
    • 제5권3호
    • /
    • pp.87-98
    • /
    • 2002
  • 광주 전남의 상수원인 주암호 유역에 대해 GIS를 이용하여 점오염원과 비점오염원 부하량을 산정하였으며 기 개발된 모형을 이용하여 수질을 모의하였다. 점오염원 부하량은 환경부에서 발표한 원단위(1998)를 이용하여 산정하였고, 비점오염원 부하량은 유출곡선지수를 이용한 SCS방법으로 직접유출량을 계산한 후 우리나라 유역의 특성에 맞는 토지이용별 기대평균농도 값을 이용하여 산정하였다. 수질모의는 미국환경청에서 개발한 WASP모형(2001)을 이용하였으며 대상유역을 GIS를 이용하여 경사, 방향, 고도, 토양, 토지이용과 강우량에 따라 44개의 소유역으로 구분하고, 그중 하나의 소유역에 대해 모형을 적용하였다. 모형의 결과치를 수질관측치와 비교한 결과 매우 유사함을 알 수 있었다.

  • PDF

직접유출량 산정을 위한 GSIS 기법의 적용 (Application of GSIS Technique for Direct Runoff Estimation)

  • 신계종;김연준
    • 한국측량학회지
    • /
    • 제18권2호
    • /
    • pp.199-209
    • /
    • 2000
  • 최근에 GSIS는 여러분야에 도입되고 있다. 특히, 수문분야에서 GSIS의 이용은 유역분석에 필요한 매개변수들을 분석하는데 강조되고 있다 이 연구에서는 직접유출량을 산정하기 위해서 미계측 유역에서 직접유출량을 계산하는데 이용되는 SCS-CN 방법을 이용하였다. 그러나 이 SCS-CN 방법은 많은 공간 자료를 취급해야 하기 때문에 GSIS을 이용하면, 쉽게 많은 자료를 취급할 수 있다. GSIS 데이터베이스는 토양종류, 토지이용에 관련된 자료를 이용하여 구축된다. 그리고 연구지역에서 유출곡선 지수는 이들 데이터베이스에 의하여 평가된다. 또한 각각의 부유역에 있는 강우관측소의 면적이 티센 다각망 기법에 의해서 산정되었다. 직접유출량은 강우관측소에 있는 이들 부유역 면적에 의해서 계산되었다. 이 연구에서 GSIS을 이용하면 빠르고 정확하게 직접유출량 분석에 필요한 매개변수들을 계산할 수 있다.

  • PDF

DAWAST 모형을 이용한 유출곡선번호 추정 (Estimation of Curve Number by DAWAST Model)

  • 김태철;박승기;문종필
    • 한국수자원학회논문집
    • /
    • 제30권5호
    • /
    • pp.423-430
    • /
    • 1997
  • 수자원개발 계획과 설계를 위한 설계홍수량 추정에 가장 중요한 문제의 하나가 유효우량 추정이다. 우리나라 수공구조물의 설계홍수량 추정에는 미국 SCS에서 개발한 유출곡선번호(curve number)로부터 유효우량을 추정하고 홍수도달시간을 고려하여 단위도를 합성하는 방법이 자주 사용되고 있다. 그러나, 우리나라의 경우 시간별 강우-유출량 자료가 충분하지 못한 상태이므로 SCS 유출곡선번호 방법을 그대로 적용하여 유효우량을 추정할 때에는 신중을 기해야 한다. 왜냐하면 우리나라의 토양, 식생 토지이용, 배수조건 등의 유출특성이 미국 유역의 유출특성과 다르고 특히 논이라는 독특한 토이이용형태가 13%나 차지하고 있기 때문이다. 이에 본 연구에서는 유역이 가장 건조한 상태의 유출곡선번호 CN-I을 SCS 유출곡선번호에서 구하지 않고 강우-유출모형인 DAWAST(DAily WAtershed STreamflow, 김태철, 1992) 모형의 유역 최대잠재저류능인 Umax로부터 구하는 방법을 제시하였다. 이매개변수 Umax는 우리나라 유역에서 관측된 일별 강우-유출량 자료를 최적화 기법으로 보정하여 구했으므로 이로부터 추정된 유출곡선번호는 우리나라의 유역특성이 반영되었다고 볼 수 있다.

  • PDF