• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.439-450
• /
• 2001

Mobile agent is one of the promising ways of overcoming network load and latency. It is also a new software paradigm including those concepts of client/server, applet/servelet, and code-on-demand. In this paper, a new mobile agent concept with flexible replay scheme is proposed, which can deal with embarrassing situation when replying results should be accomplished in various distributed applications. For example, they are 1) a burden of bulky result, 2) a need of different replay scheme dependent on work type, 3) connection failure to the target node, and 4) a need of fast migration to next node to keep the itinerary. Regarding the source node, there may be another situation that it wants to be aware of whether its wi가 is completed or not. Three kinds of reply schemes are proposed for dealing flexibly with such situations. They are based on priority reply list where nodes to be replied are stored according to their priorities. An experimental supply chain management model using the proposed reply schemes is designed and implemented. It is one of good distributed applications appropriate for our reply schemes, because it requires different reply schemes according to work types and it is important to gather required information in time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.60-67
• /
• 2012

In the study, the effect grinding condition on the workpiece arithmetical average roughness(Ra) to 10 steps leading to cutting each section with the spindle rotational speed 8000rpm and feed rate 150mm/min of grinding in GC(green silicon carbide) grinding processing after heat treatment and non heat treatment of SCM415 material. Also the following conclusions were obtained analysis of stress distribution displacement and finite elements method(FEM) on assemble parts with 3+2 axis simultaneous control through grinding and gave a load 11kg on ATC arm both sides gave a load of 11kg. For the centerline average roughness(Ra) in the heat and non-heat treatment work pieces, which were appeared the most favorable in the fifth section were $0.511{\mu}m$ and $0.514{\mu}m$, that were shown in the near the straight line section was the smallest deformation of curve. In addition, the bad surface roughness appeared on the path is too long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.89-110
• /
• 2001

Recent trends in globalization and informatization underscore the importance of logistics. As a result, there is a need for skilled and specialized logisticians. Third Party Logistics (TPL) and Supply Chain Management (SCM) require logisticians with a broad base of knowledge in areas such as multimodal transport, international trade, information technology computers, finance, operations management, etc. This study conducted a survey to find out the opinions of demanders and suppliers. The results of the surrey show that there are more skilled logisticians in the field of management, computer works in manager level and system management. The survey also found that the certificate exam, which the Ministry of Construction and Transportation started in 1997 as the "Certified Logistics Manager" exam, should have more questions in areas such as foreign languages, computers, logistics information, management skills, etc. To produce better logisticians in Korea, the government will have to invest more into their education, especially near the major ports and metropolitan areas. In addition, it is important that universities and companies work together to provide students with internship and other field-experience teaming opportunities. Logistics education centers should be built at the national level. In addition, the existing certification should be divided into two separate certifications: one for ordinary logistics, and one for international logistics. To further improve the certification system, short-answer or essay questions should be added to the second exam, and an additional certification for the highest level logisticians, a so-called "professional logisticians certificate," needs to be introduced.ntroduced.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.1
• /
• pp.1-14
• /
• 2008

1. Objectives This paper was written in order to understand formative process of Taeumin's Dry-febrile Symptom. 2. Methods We analysis Taeumin's Dry-febrile Symptom through pathology and prescription in ${\ulcorner}$Dongyisusebowonchobongyun${\lrcorner}$, ${\ulcorner}$Dongyisusebowongabo-bon${\lrcorner}$, ${\ulcorner}$Dongyisusebowonsinchukbon${\lrcorner}$. And we also analysis before study on pathology of Taeumin. 3. Results and Conclusions SCM was controled by Good-Qi. There was explained the strong and weak of Good-Qi to the number of real life. Slightness and Severeness of disease are dependent on the Health Energy of small viscera. So the interior febrile disease of Taeumin is divided to Liver-febrile symptom and Dry-febrile symptom. Because Liver-febrile symptom is reasonable symptom but Dry-febrile symptom is contrary symptom.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.361-364
• /
• 2010

글로벌 시장환경체제에서 유통구조가 복잡해짐에 따라 제조사에서 유통업체 및 소비자까지 아우르는 전체 공급망에서 제품에 대한 이력추적관리는 투명한 유통구조를 형성시킬 뿐만 아니라 더 나아가 소비자들의 안전에 지대한 영향을 미친다. 세계보건기구(WHO)에 따르면 선진국에서 부정 전문의약품의 유통비중은 전체 의약품의 1% 정도이며 이를 미국에 적용할 경우(2006년 기준), 미국에서 유통된 34억 개 전문의약품 중 3,400만 개의 전문의약품이 가짜일 가능성이 있는 것으로 보고되고 있다. 이로 인해 미국 캘리포니아주에서는 유통망의 투명성과 소비자의 안전을 보고하기 위하여 2D 바코드나 RFID(Radio Frequency IDentification)를 통해 의약품 제조에서 약국까지의 유통과정 계보를 추적할 수 있도록 제약기업에 2015년부터 제품에 시리얼번호를 부착한 이력장치(serialized e-pedigree)를 시행할 예정이다. 따라서 본 연구에서는 국내 외적으로 물류/유통과정에서 제품의 위 변조를 예방하기 위한 e-pedigree에 현황 및 동태를 파악하고 국내 e-pedigree에 대한 방향성을 고찰하는데 그 목적이 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1118-1124
• /
• 2001

Fifteen lactating crossbred cows were randomly allotted to three groups of 5 each, and fed three isoproteinous concentrate mixture varying in RDP and UDP ratios, viz. 71: 29 (T1) and 58: 42 (T2) and 44: 56 (T3), along with green maize and wheat straw given as 2/3 and 1/3 of total roughage respectively, for a period of 120 days. The DM intake (kg/d) differed significantly (p<0.01) among the treatments as well as among the fortnights over a period of 120 days. DMI (kg/d) progressively increased from first to eighth fortnight in all the treatments. The daily DMI (% BW) was significantly (p<0.01) lower in T1 (2.37) than those of T2 (2.82) and T3 (2.67). The body weights of cows decreased up to 4th fortnight in T1 and up to 3rd fortnight in T2 and T3, then it showed an increasing trend till the end of the experiment in all the treatments. Cows in T1 lost 10 kg body weight but cows in T2 and T3 gained 23 and 12 kg the body weight, respectively. Both the milk and FCM yield differed significantly (p<0.01) among the fortnights. The FCM yield increased up to 2nd fortnight in all the treatments and thereafter, the FCM yield declined gradually as the lactation advanced. The FCM yield (kg/d) was significantly (p<0.05) higher in T3 (10.47) than in T2 (9.81) and T1 (9.68), however, milk yield, SCM yield and milk energy yield did not differ among the treatments as well as among the fortnights. Fat and protein % in milk increased as the lactation advanced. However, fortnightly SNF % in milk showed an irregular trend. The % fat, protein, SNF and total solids in milk differed significantly (p<0.01) among the fortnights. The % fat and protein in milk varied significantly (p<0.01) among the treatments, being lowest in T1 and highest in T3. The feed efficiency for milk production showed a non-significant variation among the treatments as well as among the fortnights, but increased with the increase in UDP level. It is concluded that by increasing the UDP level from 29 to 56 per cent of CP in the diet of medium producing cows, the milk production increases and cost of milk production reduces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.486-490
• /
• 2012

$La_{7.33}Bi_2(SiO_4)_6O_2$ specimens were fabricated by standard solid-state synthesis route for solid oxide electrolytes. The calcined powders exhibited uniform particles with a mean particle size of about $28{\mu}m$. The room-temperature structure of $La_{7.33}Bi_2(SiO_4)_6O_2$ specimens was analyzed as hexagonal, space group P63 or P63/m, and the unit cell volume increased with increase a sintering temperature. The specimens sintered at $1,175^{\circ}C$ showed X-ray patterns of homogeneous apatite single phase without the second phase such as $La_2Si_2O_7$ and $La_2SiO_5$. The specimen sintered at $1,175^{\circ}C$ showed the maximum sintered density of 5.49 $g/cm^3$. Increasing the sintering temperature, total conductivities increased, activation energy decreased and the values were $1.98{\times}10^{-5}Scm-1$ and 1.23 eV, respectively.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.388-388
• /
• 2023

영산강은 황룡강과 지석천이 합류하는 지점이기 때문에 많은 비가 내리면 홍수에 취약한 반면, 인근 지역인 나주시 노안면과 광주광역시 승촌동 지역의 지하수를 풍부하게 해주는 역할을 하고 있다. 특히, 승촌보 인근 지역은 겨울철 수온이 따뜻한 지하수를 활용하여 겨울철 미나리를 대규모로 재배하고 있다. 현재 승촌보 운영 수위를 관리 수위인 E.L.7.5m보다 1.5~2m 낮은 E.L.5.5~6.0m로 운영함에 따라 지하수 수위가 보 관리 수위보다 낮게 형성되고 있다. 이에 K-water 영산강보관리단은 여름철 홍수방어를 위해 설치된 배수문을 겨울철에 닫아 인공소류지를 형성함으로써 겨울철 미나리 재배지역에 지하수가 함양되는지 시험운영을 계획하였다. 배수문 시설을 관리하는 한국농어촌공사 광주지사와 광주광역시 남구청과 협의하였다. 이후 영산강유역환경청 민관협의체 위원장과 주민대표 통장님들께 방문 설명 등 지역주민들의 공감대 형성을 거쳐, '22년 9월 30일 승촌보 인근 승촌배수문 등 5개 배수문을 폐쇄하여 11월 30일까지 소류지에 물을 담수하였다. 또한, 소류지의 수위를 파악하기 위해 GPS 측량으로 해발 표고 산정한 간이 목자판 수위계를 설치하여 소류지내 수위를 모니터링하였다. 승촌배수문(#1)에서 발생한 누수는 스펀지를 바닥에 깔아 보강함으로써 누수를 줄여 소류지 수위를 E.L.6.7m 이상을 유지하였다. 그 결과 영산강에 인접한 SCM-008 지하수 관측소 데이터는 승촌보 운영 수위에 영향을 받고 있음을 확인할 수 있었다. 미나리 재배 기간인 3월에는 수막 재배로 인한 지하수 사용으로 수위가 가장 낮았으며, 여름철에 지하수 수위가 회복되는 패턴을 반복하였다. 10월~11월 시험운영기간 동안 SCM-005, -008, -101 지하수 관측정은 소류지와 중앙배수로에 가까울수록 인공 함양시 수위 상승효과가 크게 나타났으며, 평년(2020년~2021년) 대비 지하수위 상승을 확인하였다. SC-0 지역은 2022년 가뭄으로 다우년 대비 지하수 수위가 낮았으나, 시험운영 기간 중 지하수 수위 하강 속도가 늦춰지거나, 수위가 상승하는 것을 확인하였다. 또한, 인근 마을주민들에게 시험 운영 결과를 공유하였고, 소류지가 예년처럼 건천화되었을 때보다 지하수 수위상승과 중앙배수로나 소류지에서 양수하는 등 용수 이용에 도움이 되었다는 긍정적인 답변을 받았다. 따라서 2023년도에도 겨울철 미나리 재배 시기 동안 배수문을 닫아 소류지를 형성하여 지하수 함양에 도움이 되록하여, 미나리 지역의 농가 수익 증대에 보탬이 되도록 할 예정이다.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.2
• /
• pp.1-15
• /
• 2010

1. Objectives: This research aims to study the general overview of the theories on the covetous desire and the relevant theories on cultivation mentioned in "Donguisusebowon (東醫壽世保元): Theories on Nature and Conduct (性命論)". 2. Methods: The theories concerning the covetous desire introduced in Dong-Mu's manuscripts, including "Gyukchigo 格致藁)", "Yougocho (遺稿抄)", "Dongmuyougo (東武遺稿)" and "Jaejungsinpyun (濟衆新編)", were comprehensively reviewed. Furthermore, the significance of the theories on the covetous desire and the relevant theories on self-cultivation were studied within the context of "Donguisusebowon(東醫壽世保元): Theories on Nature and Conduct (性命論)". 3. Results and Conclusions: 1) Among the four covetous desires (selfishness (私心), indiscretion (放心), indolence(逸心), acquisitiveness (慾心)), selfishness and acquisitiveness are the interpersonal components that deal with the relationship between individuals, whereas indiscretion and indolence are the intra-personal or self-concerned components that deal with the internal desires within the individual. 2) In the early concepts on the quaternity explaining the perspective on the human being as introduced in Dongmu's earlier manuscripts, the four covetous desires are thought of as the most important etiological components, that are also intimately related to the theories of self-cultivation. 3) Among the concepts introduced in "Donguisusebowon (東醫壽世保元): Theories on Nature and Conduct (性命論)", viciousness (邪心) and negligence (怠心) are primary, intra-personal (self-concerned) desires that are henceforth matched to indiscretion and indolence, respectively, while selfishness (arrogance, assertiveness, indiscrimination and exaggeration (驕矜伐夸)) and acquisitiveness (violation, extravagance, slothfulness and stealthiness(奪侈懶竊)) are secondary, interpersonal desires. 4) 'Preserving the mind (存其心)' and 'rectifying the body (修其身)' are Methods of overcoming viciousness (indiscretion) and negligence (indolence), the intrapersonal desires, while 'nurturing the nature (養其性)' and 'propping the course (立其命)' are Methods of eliminating selfishness and acquisitiveness, the interpersonal desires, which ultimately each leads to the completion of Nature (性) and Conduct/Course (命).