• Title/Summary/Keyword: SCA1

Search Result 147, Processing Time 0.031 seconds

Comparison of liquid chromatographic enantiomer resolution of racemic amino compounds on chiral stationary phases of crown ether type

  • Lee, Won-Jae;Baek, Chae-Sun;Kim, Ji-Yeon
    • Proceedings of the PSK Conference
    • /
    • 2003.04a
    • /
    • pp.285.1-285.1
    • /
    • 2003
  • ChiroSil RCA(+) and SCA(-) HPLC chiral stationary phases (CSPs) developed by covalently bonding (+)- and (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18-C-6-T A) to silica gel were employed for enantioresolution of racemic amino compounds, respectively. Also, these 18-C-6-TA covalently bonded CSPs were compared to a commercially available Crownpak CR CSP prepared by coating chiral crown ether as a chiral selector on ODS column. (omitted)

  • PDF

Diallel Analysis of Anatomical Components of the Fruit in Red Pepper (이면교잡(二面交雜)에 의(依)한 고추과중(果重)의 구성요소(構成要素)에 대(對)한 유전분석(遺傳分析))

  • Kim, Yang Choon
    • Current Research on Agriculture and Life Sciences
    • /
    • v.1
    • /
    • pp.11-18
    • /
    • 1983
  • This study was performed to obtain the basic informations for red dry pepper fruit with more pericarp weight(or in percentage) with a complete diallel cross(excluding reciprocals) using eight cultivars. Heterosis, combining ability and inheritance of the dry red fruit weight and its components(stem, placenta, seed, and pericarp) were evaluated. The results obtained were summarized as follows : Dry weight/fruit and its four antomical components were heavier in the earlier harvest fruit than in that of the later fruit. They showed 1% significance among parents and $F_1s$, and those of $F_1$ were significantly heavier than in parent. All characters in earlier fruit of parent, however, were higher than in later fruit of $F_1$. Dry weight percentage of pericarp to dry weight/fruit was highest followed by seed. Percentage of pericarp in the later fruit was increased while the seed decreased and percentages of stem and placenta were not differed between the earlier and later fruit. $F_1$ hybrids above the higher parent were observed in all characters. Mean heterosis (%) was positive in all characters while mean heterobeltiosis (%) was negative excepting seed and dry weight/fruit. GCA and SCA variances were highly significant, and GCA vaiances were greater than SCA in all characters. The directions of dominance were positive. Partial dominance was shown in stem, complete dominance in placenta, pericarp and dry weight/fruit, and over dominance in seed. The effective genes were estimated as one for stem and placenta, and two for seed, pericarp and dry weight/fruit. Heritabilities in narrow and broad sense were higher.

  • PDF

Line X Tester Analysis for Economic Characters in the Bivoltine Silkworm, Bombyx mori L.

  • Naseema Begum;A.S.K. Bhargava;M.M. Ahsan;R.K. Datta
    • Journal of Sericultural and Entomological Science
    • /
    • v.39 no.2
    • /
    • pp.205-209
    • /
    • 1997
  • In a line X tester crossing programme (24 lines 2 testers) the general combining ability (GCA) and specific combining ability (SCA) effects were analyzed for five economic characters in the bivoltine silkworm, Bombyx mori L. The results showed desired GCA effects in 934D1 (9500), 934B (9789) and 934A1 (9855) for cocoon yield per 10,000 larvae brushed by number. Likewise, the lines found to be superior based on GCA effects for other characters were as follows; 931D (14.040 Kgs), 935E (17.023 Kga.), 934D1 (15.643 Kgs.) and 934B (15.687 Kgs.) for cocoon yield by weight: 931D (1.717 g) and 930E (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight: 931D (1.717 g) and 930e (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight; 932B (18.7%), 933A (18.86%) and 935A (19.89%) for shell ratio. SCA effects showed the superiority of 932D$\times$KA (9822 cocoon yield per 10,000 larvae brushed by number); 932A$\times$NB4D2 (16.933 Kgs. cocoon yield per 10,000 larvae brushed by weight); 931C$\times$KA (1.911 g single cocoon weight); 934$\times$NB4D2 (0.371 g single shell weight and 21.0% shell ratio). The analysis indicated non-additive gene action for all the five characters.

  • PDF

STUDIES ON THE GENETIC ANALYSIS AMONG BURLEY, FLUE-CURED AND SUN-CURED TYPE TOBACCO 1. HETEROSIS, CORRELATION AND COMBINING ABILITY OF $F_1$ HYBRID (버어리종, 황색종, 양건종, 담배의 유전분석에 관한 연구 I. $F_1$의 잡종강세, 상관 및 조합능력)

  • 한철수
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.7 no.2
    • /
    • pp.99-109
    • /
    • 1985
  • The present studies were carried out to obtain some basic informations of the breeding of tobacco varieties. Genetically divergent 8 varieties, 3 flue-cured, 2 burley and 3 sun-cured tobaccos, were used in half diallel cross. In order to analyze the heterosis, combining abilities, modes of inheritance and correlations for some agronomic and chemical characters, 8 parents and 28 $F_1$ were tested. The results obtained were summarized as follows: The percentages of heterosis for stem diameter, internode length and total sugar content in $F_1$ hybrid were 3.6%, 3.1% and 10.6%, whereas these for days to flower, total alkaloids and leaves per plant were -6.3%, -6.9% and -5.0%, respectively. Yield had significant positive genotypic correlations with plant height, days to flower and leaf length, but negative with internode length and total sugar content. It also had significant prositive phenotypic correlations with plant height, days to flower, leaves per plant, leaf length, leaf width and leaf shape index (Leaf length/leaf width). General (GCA) and specific combining abilities (SCA) for all characters of $F_1$ hybrid were significant. The effects of GCA were positive on yield, plant height, stem diameter, leaves per plant and days to flower of Burley 21. And those were positive on yield, leaf shape index and plant height, but negative on leaves per plant and total nitrogen of Hicks. The effects of SCA for yield and leaves per plant were greater than those of others on the combinations of Coker 139 and Burley type, respectively.

  • PDF

Genetic Analysis by Diallel Crosses in F1 Generation of Silkworm, Bombyx mori (이면교잡에 의한 가잠 F1세대의 몇 가지 양적 형질에 관한 유전 분석)

  • 정원복;장권열
    • Journal of Sericultural and Entomological Science
    • /
    • v.28 no.1
    • /
    • pp.24-29
    • /
    • 1986
  • A set of 21 crosses of F1 generation by diallel crosses from seven parent silkworm, Bombyx mori L. were used as materials to estimate genetic parameters such as gene action and combining ability. Experiments were conducted in 1985, and three characters, which are weight of cocoon, weight of cocoon layer and ration of cocoon layer, were observed. The data were analyzed for each character by Jinks', Hayman's and Griffing's methods. The result obtained are summarized as follows : 1. In Vr-Wr graphical analyses, weight of cocoon was found to be inherited in over dominance, and weight of cocoon layer and ration of cocoon layer were observed as partial dominance. 2. Estimate of additive component of variance(D) was greater than those of dominance component of variance(H) for weight of cocoon layer and ratio of cocoon layer, and positive values of F were observed for all characters. 3. Mean squares of general combining ability were higher than those of specific combining ability. 4. Variety Jam 107 was expressed as the highest GCA effects for three characters, and high SCA effects for all characters were observed in combinations of 113 $\times$Jung 14 and Jam 107 $\times$Jung 14.

  • PDF

Quantitative Surface Analysis of Co-Ni and Au-Cu alloys by XPS and SIMS (XPS와 SIMS에 의한 Co-Ni과 Au-Cu 합금표면 정량분석 연구)

  • 김경중;문대원;이광우
    • Journal of the Korean Vacuum Society
    • /
    • v.1 no.1
    • /
    • pp.106-114
    • /
    • 1992
  • Abstract-Quantitative surface analysis of Co-Ni and Au-Cu alloys by XPS and SIMS was studied. For Co-Ni alloy, quantitative XPS analysis could be done within 1-2% relative error with pure element standards without any correction. For Au-Cu, quantitative XPS analysis was not possible without any correction. But it could be done with standard alloys of various composition within 1-2% relative error. Without standard alloys, Au-Cu alloys could be analyzed by XPS within 10% relative error with pure element standards. For SIMS analysis of Co-Ni alloys, the relative secondary ion yields of Co+/Nit has linear relation with ratio of each composition so that quantitative SIMS analysis was possible for Co-Ni alloys. Preliminary results of XPS round robin test of VAMAS-SCA Japan Project are given.

  • PDF

The Effect of Circuit Weight Training on the Muscular Function and Cardiopulmonary Function (육상과 선박내에서의 Circuit Weight Training 이 근기능 및 심폐기능에 미치는 영향)

  • 하해동;신군수
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 1998.04a
    • /
    • pp.163-185
    • /
    • 1998
  • The purpose of this study was to analyze the physiology changes by circuit weight training(CWT). The subject of this study consists of 16 student on ship(experimental groups(SE) N=8, control group(SCa) N=8) and 16 students on land (experimental groups(LE) n=8, control groups(LCb) N=8). The items of measurement were the changes of CWT time and heart rate per week, musclear functino and cardiopulmonary function. The conclusions are as follows : 1. Muscular fuction 1) Back strength in SE and LE group was increased significantly (p<.01, p<.05, 8.86% and 7.08%).Grip strength was increased slightly in 4 groups but there was no significance. 2) In push-ups, all 4 groups were increased significantly (p<.05, p<.01), sit-ups also were increased significantly in SE and LE group (p<.05, 6.71% and 9.62%). 3) In SE and LE group , standing long jump was in significantly (p<.01, p<.05, 4.49% and 6.09%), but only in LE group , side step was increased significantly (p<0.1, 5.84%). 2. Cardiopulmonary function 1) HRrest was decreased slightly in all 4 groups but was not significant changes. HRmax was increased only in LE group significantly (p<.05, 2.81%), treadmill running time was increased significantly in SE and LE group respectively (p<.01, p<.05, 10.78% and 11.07%). 2) VEmax was increased significantly in SE and LE group(p<.05, p<.01, 10.59% and 13.68%), but only in LE group Rfmax was increased significantly (p<.01, 4.83%). 3) In VO2max, LCb group was increased significantly (p<.05, 6.835), but SCa group was decreased significantly (p<.05, 4.32). VO2max/kg$.$min was increased significantly in LE and LCb group respectively (p<.01 p<.05. 4.75% and 3.98%).

  • PDF

Effect of 3-Isocaynatopropyl Triethoxy Silane on PU Adhesive (3-Isocaynatopropyl Triethoxy Silane이 PU 접착제에 미치는 영향)

  • Ju, Honghee;Jang, Euisub;Park, Chan Young;Lee, Won-Ki;Kim, Taekyun;Chun, Jae-Hwan
    • Journal of Adhesion and Interface
    • /
    • v.14 no.1
    • /
    • pp.36-42
    • /
    • 2013
  • To improve hydrolytic stability of polyurethane (PU) adhesives, a silane coupling agent (SCA) was added. 3-Isocyanatopropyl triethoxy silane (ITS) as a SCA has two functional groups in the main chain and it is used to improve an interfacial interaction between polymer and inorganic material or metal. In this study, PU adhesives with different amounts of ITS from 0 to 1 wt% were synthesized. Pot time, modulus, thermal stablilty, and adhesive force of the obtained samples were measured. The results showed that the adhesives with ITS showed better properties than that of pure one.

A New Trend in Information Retrieval : Question Answering (서비스 컴포넌트 아키텍처)

  • Im, Chol-Hong
    • Communications of the Korean Institute of Information Scientists and Engineers
    • /
    • v.25 no.1 s.212
    • /
    • pp.34-39
    • /
    • 2007
  • 국내외적으로 차세대 아키텍처인 SOA(Service Oriented Architecture)에 대한 관심이 높아지고 있으며, 수년 내에 SOA가 일반적인 아키텍처가 될 것으로 전망되고 있다. 하지만, SOA를 실제로 구축하고 활용하기에는 많은 장벽들이 존재하고 있다. 본 논문에서는 SOA기반의 Application을 구축하기 위해 필요한 컴포넌트 규격에 대한 연구와 함께 기존의 분산 객체 컴포넌트를 확장하여 비즈니스 컴포넌트로 구축 가능하게 지원하는 SCA(Service Component Architecture)를 기반으로 SOA를 구축하는 방안을 제시하여, SOA의 장점인 유연성과 상호운용성을 보장하는 Application 구축에 활용이 가능하도록 하고, 이론 및 사상적인 측면에서 벗어나 현실화된 Architecture로써 SOA가 도입 될 수 있도록 하고자 한다.

Genetic Analysis of Growth Response to Cold Water Irrigation in Rice

  • Han, Long-Zhi;Koh, Hee-Jong
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.45 no.1
    • /
    • pp.26-31
    • /
    • 2000
  • This study was carried out to obtain the basic information for breeding cold-tolerant rice varieties with high yield-productivity through wide crosses between indica and japonica rice. Genetic analysis was conducted using 55 F$_1$s obtained from half-diallel crosses among eleven cultivars of various origin including indica and japonica rice. Screening for cold tolerance was done with cold-water irrigation after transplanting until ripening stage. Both general combining ability (GCA) and specific combining ability (SCA) effects were highly significant in all characters associated with dry matter accumulation at 30 and 50days after cold-water irrigation (DAC). The variance of GCA was much larger than that of SCA in plant height, shoot dry weight per plant (DWP), crop growth rate (CGR) and cold-water response index (CRI) of these characters except CRI of shoot dry weight per plant. The DWP, CGR and CRI of these characters of Gaochan 102, Tong88-7 and TR22183 were markedly higher than those of the others. GCA effects of these varieties on DWP, CGR and their CRI were also higher than those of the others, indicating that they are useful as promising parents for breeding cold-tolerant varieties. Analysis of genetic parameters for 11$\times$11 half-diallel F$_1$s revealed that inter-locus gene interaction were concerned in the expression of plant height at 50 DAC, CRI of DWP at 50 DAC, and CRI of CGR, and that intra-locus gene interaction for plant height and the other characters were partial dominance and over-dominance, respectively. Narrow-sense heritability (h$^2$$_{N}$) was the highest in plant height as 0.729, and the lowest in CRI of DWP at 30 DAC as 0.048, suggesting that selection for cold tolerance will be quite effective in case that the selection criterion is the performance itself.f.

  • PDF