• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.317-320
• /
• 2005

We report experimental and simulation results of L0 state using inner retarder film compared with normal retardation film. In short wavelength range, the reflectance of inner retardation film is three times compared with that of normal retardation film. This results in blue color of L0 state, as retardation decreases or polar angle increases, the color shifts toward purple, finally yellow color, as expected in the simulation results.

• Journal of Information Display
• /
• v.6 no.2
• /
• pp.7-11
• /
• 2005

This paper investgates the transflective liquid crystal displays (LCDs) associated with fringe-field switching (FFS) mode to achieve high image quality. In the past, several cell structures were used to fabricate transflective FFS LCDs. Their structures and characteristics are carefully examined to find their merits and demerits. In addition, we attempt to optimize cell parameters to achieve a single driving circuit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.419-422
• /
• 2005

We have studied transflective liquid crystal displays (LCDs) associated with fringe-field switching (FFS) mode to achieve high image quality. In the past, several cell structures were used to fabricate transflective FFS liquid crystal display s. Their structures and characteristics are carefully examined to find their merits and cons. Further, optimization of cell parameters to achieve a single driving circuit is performed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.826-829
• /
• 2006

In order to increase the transmittance of panel, in process of FFS TFT-LCD, fine patterning process which is adopted to the optimum passivation(PVX) hole was applied fine metal line patterning process and was made with optimum efficiency of liquid crystal by using space/bar size control of pixel electrode. We fabricated 2.03" mobile FFS devices with fine patterning process. Further, this technology will be applied to the basis of other process for higher PPI or higher aperture ratio technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1503-1506
• /
• 2005

This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.426-429
• /
• 2005

The fringe-field switching (FFS) mode associated with a transition from a homogenously aligned to twist deformation require rubbing process. In this devices, $1^o$ of misalignment in an azimuthal direction could cause voltage-dependent transmittance (V-T) to be different from that in a normal area and consequently results in a rubbing mura. According to our studies, the single domain FFS cells are much more sensitive to the rubbing mura than the dual domain FFS cell. Moreover, the FFS cells with negative LC are much more sensitive to the rubbing mura than the FFS cells with positive LC.

• Journal of Korean Medicine for Obesity Research
• /
• v.18 no.2
• /
• pp.74-82
• /
• 2018

Objectives: The objective of this study is to investigate the effects of Silbi-um (SBU) extract on the alcoholic fatty liver induced by EtOH administration for 8 weeks. Methods: Male Sprague Dawley rats were used. All animals were randomly divided into 3 groups; Normal, EtOH and EtOH+SBU. The rats of EtOH group were daily treated with ethanol of 25% (v/v) for 8 weeks (n=10). EtOH+SBU group was orally treated with SBU water extract after ethanol administration (n=10). The rats of Normal group were treated with saline (n=10). After 8 weeks, the mean body weight, liver weight, and liver-body weight ratio were calculated. The serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) of all groups were measured. The morphological alterations were observed using hematoxylin and eosin (H&E) and Oil Red O staining. Moreover, the alteration of tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$) levels were analyzed immunohistochemistrically. Results: The histological data showed that liver sections from EtOH group displayed severe steatosis. SBU extract significantly inhibited the progression of the alcoholic liver injury. The increased serum level of ALT and AST induced by ethanol administration were decreased by SBU extract. Furthermore, SBU extract significantly decreased the liver concentrations of $TNF-{\alpha}$. Conclusions: SBU water extract attenuated the alcohol induced fatty liver by improving hepatic lipid metabolism via suppression of $TNF-{\alpha}$ protein. SBU could be effective in protecting the liver from alcoholic fatty liver.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.530-540
• /
• 2013

The business environment that affects the management performance can be characterized by each Strategic Business Unit (SBU) since construction companies win overseas contracts due to the fairly good construction situations while experience a decline in the local housing market. Environmental changes can alter the strategic importance of the SBU when measuring the management performance. However, large construction companies apply BSC (Balanced Score Card) for collective calculation to determine the management performance, making it difficult to reflect the strategic importance of SBU. This method may create a distorted image of management performance that fails to take environmental changes into consideration, and as such it needs to be improved. Yet, there are no studies on the weight of each SBU considering environmental changes. Thus, the current study intends to analyze the weight of SBU for company-wide measurement of the performance of large construction companies. In addition, a model for analysis of SBU importance is proposed to respond to the constantly changing environmental situations and to modify the weight. For analysis of SBU weight, a questionnaire was conducted with 23 experts and hands-on workers, and the questionnaire result was quantitatively analyzed by applying the FD-AHP method. It is expected that the result will enable a model to be proposed to calculate the weight per division in a manner that reflects environmental changes and minimizes strategic distortion when measuring the management performance of large construction companies.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.9-13
• /
• 2000

In liquid crystal displays, the display mode that represents initial liquid crystal alignment and method of applying voltage, mainly determines the image quality of display. Recently we have developed the fringe-field switching (FFS) mode exhibiting high image quality. In this paper, a pixel concept, manufacturing process, materials, and electro-optic characteristics of the FFS mode comparing with conventional in-plane switching mode, and its possible application to reflective type are discussed.