• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1697-1701
• /
• 2016

The leakage conduction and critical voltage characteristic of ZnO ceramic were investigated as a function of $Sb_2O_3$ concentration. Leakage conduction in the ohmic region increased with increasing $Sb_2O_3$ concentration and was attributed to the potential barrier height. The nonlinear coefficient increased with an increasing amount of $Sb_2O_3$. It was found that increases in the apparent critical voltages were associated with the lowered donor concentration in the grain boundary of between two ZnO grains. And the decrease of donor concentration on doping with $Sb_2O_3$ additive was attributed to the lowered capacitance in the grain boundary layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.282-282
• /
• 2013

The antimony sulfide ($Sb_2S_3$) thin films were deposited using the gas phase method which known as atomic layer deposition (ALD) on mesoporous micro-films. Tris (dimethylamido) antimony (III[$(Me_2N)_3Sb$] and hydrogensulfide ($H_2S$) were used as precursors to deposit $Sb_2S_3$. Self-terminating nature of $(Me_2N)_3Sb$ and $H_2S$ reaction were demonstrated by growth rate saturation versus precursors dosing time. Absorption spectra and extinction coefficient were investigated by UV-VIS spectroscopy. Scanning electron microscopic analysis and X-ray photoelectron spectroscopy (XPS) depth profile were employed to determine the conformal deposition.

• Journal of Powder Materials
• /
• v.12 no.4 s.51
• /
• pp.255-260
• /
• 2005

Direct solid state synthesis by hot pressing has been applied in order to produce high efficiency $Zn_4Sb_3$ bulk specimens. Single phase $Zn_4Sb_3$ with 98.5% of theoretical density was successfully produced by direct hot pressing of elemental powders containing 1.2 at.% excess Zn. Thermoelectric properties as a function of temperature were investigated from room temperature to 600 K and compared with results of other studies. Transport properties at room temperature were also evaluated. Thermoelectric properties of single phase $Zn_4Sb_3$ materials produced by direct synthesis were measured and are comparable to the published data. Direct solid state synthesis by hot pressing provides a promising processing route in this material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.582-585
• /
• 2001

InSb temperature dependent hall effect of multilayerd structures were investigated. According to variation of magnetic field measured hall coefficient, Hall mobility, carrier density and hall voltage. For the measurement of electrical properties of hall device, evaperated InSb thin film fabricated with series and parallel multilayers. We found that the XRD analysis of InSb thin film showed good properties at 200$^{\circ}C$, 60 minutes. Resistance of ohmic contact increased linearly due to increasing current. Some of device fabrication technique and analysis of Hall effect were discussed.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.221-225
• /
• 2007

We have prepared $\delta$-phase SbTe alloy with various Sb contents of 64, 72, and 76 at. % and investigated the phase change temperature, the crystal structures of $\delta$-phase SbTe alloy, and determined the ovonic threshold switching voltages with edge contact type phase transition dimensions. As a result, the crystallization temperature is slightly reduced from 126 to $122^{\circ}C$, whereas the melting temperature is not changed. The ovonic threshold switching voltage is reduced from 1.6 to 0.9 V as increasing the Sb content from 64 to 76 at. %. It is found that the reductions of crystallization temperature and the ovonic threshold switching voltage are closely related with the interplanar spacing between adjacent atomic layers and the stacking number of atomic layers in a unit cell.

• YAKHAK HOEJI
• /
• v.3 no.1
• /
• pp.45-47
• /
• 1957

A paper chromatographical method is studied to detect As and Sb from a mixed sample applying the principle of Gutzeit's. After spoting the mixed $AsH_3$ sample on the $AgNO_3$ band of paper strip (6 mm $\times$ 300 mm of Whatman No.52 or Toyo No.2 filter paper), the strip is developed by ascending method using N-HCl solution as a developing soluvent. The color spot detection of As and Sb is done by exposing the dried chromatogram to $H_2S$ stream. According to the experiments, the detectable minimum range of As is 3 micrograms and that of Sb is 15 micrograms. The yellow phosphorous interfers to the color spot detection of As and Sb, so that, previously the most of yellow phosphorous from the sample should be removed out.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.2
• /
• pp.133-137
• /
• 2014

The recent development of electro-optic devices and anticorrosion media has made it necessary investigate infrared optical systems with solid-solid interfaces of materials with amorphous characteristics. One of the most promising classes of materials for these purposes seems to be chalcogenide glasses, which are based on the Ge_Sb_Se system, have drawn much attention because of their use in preparing optical lenses and fibers that are transparent in the range of 3-12 um. In this study, a standard melt-quenching technique was used to prepare amorphous Ge_Sb_Sechalcogenideto be used in the design and manufacture of infrared optical products. The results of structural, optical, and surface roughness analyses of high purity Ge_Sb_Sechalcogenide glasses after various annealing processes reported.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.598-603
• /
• 2016

The recent development of electro-optic devices and anticorrosion media has led to the necessity to investigate infrared optical systems with solid-solid interfaces of materials that often have the characteristic of amorphousness. One of the most promising classes of materials for those purposes seems to be the chalcogenide glasses. Chalcogenide glasses, based on the Ge-Sb-Se system, have drawn a great deal of attention because of their use in preparing optical lenses and transparent fibers in the range of 3~12 um. In this study, amorphous Ge-Sb-Se chalcogenide for application in an infrared optical product design and manufacture was prepared by a standard melt-quenching technique. The results of the structural, optical and surface roughness analysis of high purity Ge-Sb-Se chalcogenide glasses are reported after various annealing processes.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.884-890
• /
• 1996

We have investigated a structural change of Si(100)-($2 \times 1$)-Sb surface caused by atomic hydrogen adsorption at room temperature using time-of-flight impact collision ion scattering spectroscopy (TOF-ICISS) and low energy electron diffraction (LEED). We found that when atomic hydrogen adsorbs on the Si(100)-($2 \times 1$)-Sb surface, (1) the partial desorption of Sb atoms from the Si(100) surface occurs even at room temperature, (2) the rest Sb atoms are displaced from their original positions and form an almost two-dimensional layer with dispersive distribution of Sb atoms, and (3) the structural transformation into the Si(100)-($1 \times 1$)-H periodicity is induced by the formation of the $1 \times 1$-H dihydride phase on the Si substrate.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.17-25
• /
• 1992

South ore deposits of the Dunjeon gold mine is a fissure-filling vein emplaced in the Cretaceous granodiorite, skarnized and/or hornfelsified Ordovician Dumudong Formation. Mineralization can be divided into three distinct depositional stages on the basis of vein structure and mineral assemblages. Sb, Bi sulfosalts minerals, such as tetrahedrite, bournonite, boulangerite, cosalite, lillianite, heyrovskyite, unknown Pb-Bi-Sb-S mineral, native Sb, native Bi and Au-Ag minerals are mainly deposited in stage II. The formation temperature and sulfur fugacties of Sb, Bi minerals in the stage II deduced from thermodynamic considerations are from $172^{\circ}$ to $378^{\circ}C$ and $10^{-10.6}$ to $10^{-19.4}$ atm. Those temperatures are good agreement with temperature data obtained by fluid inclusion study which has reported already.