• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.287-288
• /
• 2009

GIS WEB 맵 서버는 다중 사용자 환경에서 신속한 요구 처리와 다양한 서비스를 수행해야 하며, 특히 맵 화면 표출 요구에 대한 신속한 처리 여부가 주요한 관건이 된다. 그러나 WEB 환경 하에서 기존의 공간 DBMS나 공간 파일시스템을 기반으로 대용량의 공간 데이터를 처리하기에는 만족할 만한 성능을 보장할 수가 없다. 따라서 이러한 문제점을 해결하기 위한 GIS WEB 맵 서버만을 위해 특화된 공간 저장소 형식이 필요하며, 이러한 공간 저장소는 임의의 맵 영역 데이터를 신속하게 제공할 수 있어야 한다. 본 논문에서는 공간 데이터를 영역별로 관리하는 계층적 형태의 공간 저장소(가칭 'SB-저장소') 구조를 제시하여, 신속한 맵 화면 처리가 요구되는 GIS WEB 서버에 효율적인 맵 데이터 서비스 또는 맵 이미지 서비스를 제공하기 위한 토대를 마련하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.128-128
• /
• 2010

중적외선 영역은 장애물에 의해서 파장의 흡수가 거의 일어나지 않기 때문에 적외선 소자에서 널리 이용되고 있다. 현재 대부분의 중적외선 소자에는 HgCdTe (MCT)가 사용되고 있지만, 3성분계 화합물이 가지는 여러 문제를 가지고 있다. 반면에, 2성분계 화합물인 인듐안티모나이드 (InSb)는 중적외선 영역 ($3-5\;{\mu}m$) 파장 대에서 HgCdTe와 대등한 소자 특성을 나타냄과 동시에 낮은 기판 가격, 소자 제작의 용이성, 그리고 야전과 우주 공간에서 소자 동작의 안정성 때문에 HgCdTe를 대체할 물질로 주목을 받고 있다. InSb는 미국과 이스라엘과 같은 일부 선진국을 중심으로 연구가 되었지만, 국방 분야의 중요한 소자로 인식되었기 때문에 소자 제작에 관한 기술적인 내용은 국내에 많이 알려지지 않은 상태이다. 따라서 본 연구에서는 InSb 소자 제작의 기초연구로 절연막과 pn 접합 형성에 대한 연구를 수행하였다. 절연막의 특성을 알아보기 위해, InSb 기판위에 $SiO_2$와 $Si_3N_4$를 PECVD (Plasma Enhanced Chemical Vapor Deposition)로 증착을 하였다. 절연막의 계면 트랩 밀도는 77K에서 C-V (Capacitance-Voltage) 분석을 통하여 계산하였으며, Terman method 방법을 이용하였다.[1] $SiO_2$는 $120-200^{\circ}C$의 온도 영역에서 계면 트랩 밀도가 $4-5\;{\times}\;10^{11}cm^{-2}$범위를 가진 반면, $240^{\circ}C$의 경우 계면 트랩 밀도가 $21\;{\times}\;10^{11}cm^{-2}$로 크게 증가하였다. $Si_3N_4$는 $SiO_2$ 절연막에 비해서 3배 정도의 높은 계면 트랩 밀도 값을 나타내었으며. Remote PECVD 장비를 이용하여 $Si_3N_4$ 절연막에 관한 연구를 추가적으로 진행하여 $7-9\;{\times}\;10^{11}cm^{-2}$ 정도의 계면 트랩 밀도 값을 구할 수가 있었다. 따라서 InSb에 대한 절연막은 $200^{\circ}C$ 이하에서 증착된 $SiO_2$와 Remote PECVD로 증착 된 $Si_3N_4$가 적합하다고 할 수 있다. 절연막 연구와 더불어 InSb 소자의 pn 접합 연구를 진행하였다. n-InSb (100) 기판 ($n\;=\;0.2-0.85\;{\times}\;10^{15}cm^{-3}$ @77K)에 $Be^+$이온 주입하여 p층을 형성하여 제작 되었으며, 열처리 조건에 따른 소자의 특성을 관찰 하였다. $450^{\circ}C$에서 30초 동안 RTA (Rapid Thermal Annealing)공정을 진행한 샘플은 -0.1 V에서 $50\;{\mu}A$의 높은 암전류가 관찰되었으며, 열처리 조건을 60, 120, 180초로 변화하면서 소자의 특성 변화를 관찰하였다.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.35-41
• /
• 2021

VWTi, which is used as a commercial catalyst in NH3-SCR, exhibits excellent denitrification performance at 300 to 400 ℃, but there is a problem that efficiency decreases at low temperatures below 300 ℃. Research on catalysts containing promoter to increase low-temperature denitrification efficiency is steadily progressing. However, research on the cause of the improvement in low-temperature denitrification efficiency of the catalyst and the catalyst properties is insufficient. In this study, it was confirmed that by adding Sb to VWTi, denitrification performance was improved by more than 10% in NH3-SCR reaction below 300 ℃. At this time, the space velocity and the size of the catalyst particles were controlled to exclude the influence of external/internal diffusion. In addition, the catalytic properties according to the presence or absence of Sb were investigated by performing BET, TEM/EDS, O2-TPD, H2-TPR and DRIFTs analysis. It was judged that the addition of Sb increased the adsorbed oxygen species on the surface of the catalyst, thereby enhancing the redox properties of the catalyst at low temperature and exhibiting excellent denitrification performance.

• Applied Microscopy
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2004

The three-dimensional (3D) structure of an inorganic crystal, $SmZn_{0.67}Sb_2$ (space group P4/nmm, $a=4.26{\AA}\;and\;c=10.37{\AA}$) was solved by electron crystallography. High resolution electron microscopy (HREM) images from 3 different major zone axes and selected-area electron diffraction patterns from 16 different zone axes were combined to obtain a 3D information. A crystallographic image processing (CIP) of HREM images was used for more accurate determination of the crystal structure. As a result of this electron crystallography, average phase errors (${\Phi}_{res}$) of [001], [100] and [110] HREM images are $17.0^{\circ},\;8.3^{\circ}\;and\;21.9^{\circ}$, respectively. Xray crystallography of $SmZn_{0.67}Sb_2$ has attempted to compare accuracy of the structure determination by electron crystallography, which resulted in the cell parameters of $a=4.2976(6){\AA}\;and\;c=10.287(2){\AA}$, and the R-factor ($R_{sym}$) of 4.16%.

• Journal of Yeungnam Medical Science
• /
• v.15 no.2
• /
• pp.325-340
• /
• 1998

A cross-sectional study was conducted to evaluate the relationship between sick building syndrome(SBS) and the environmental factors affecting SBS on 130 underground workers and 60 controls. The study consisted of 1) a review of environmental condition 2) measurement of temperature, $O_2$, $CO_2$, CO, and formaldehyde and 3) a questionnaire survey of symptom prevalence and perception of environmental conditions using indoor Air Quality questionnaire recommended by National Institute for Occupational Safety and Health. Bronchitis and dust allergy were more prevalent in underground workers significantly(p < 0.05). Among the 18 symptoms related to the indoor air pollution, the experience rate of dry, itching or irritated eyes, sore or dry throat, chest tightness, tired or strained eyes and dry or itchy skin symptom was significantly different between the underground workers and controls. The diagnostic criteria of SBS was defined as at least 1 symptom is experienced 1-3 times a week during the last 1 month among 18 indoor air pollution related symptoms which can be relieved by moving out of the underground. Applying the criteria, the mean symptom score was significant higher in underground workers than controls significantly (p < 0.05). These resalts indicated that underground workers are under inappropriate ergonomic and physical condition and inadequate ventilation. Their experience rate of symptoms related to indoor air pollution and prevalence of SBS was significantly higher than controls. To reduce the prevalence of SBS of underground workers, the surveillance system of indoor air quality, restriction of using fuel in underground and legislative regulations for the environment are needed to establish a better indoor air quality. Early detection, treatment and prevention of SBS through medical attention is also needed.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.129-134
• /
• 1993

At the Janggun mine, boulangerite usually occurs as needles or irregularly-shaped grains, up to $500{{\mu}m}$ in longer dimensions, closely associated with galena, minerals of a tetrahedrite-freibergite series and bournonite in the peripheries of South A and B orebodies and the zone of manganoan carbonates surrounding them. In some places, especially at the top of South B orebody, it occures as "feather ore" consisting of its fine needles or "hairs" in small drusy cavities together with fine-grained euhedral galena, pyrite, manganoan carbonates, quartz, etc. In reflected light, it is bluish grey in colour exhibiting moderate bireflectance and is strongly anisotropic without any internal reflections. Reflectance in air is $R_{max}=43.2$, $R_{min}=35.7$ percent at wavelength of 580 nm, and VHN: $146-173\;kg/mm^2$ at a 50 g-load. The chemical composition on the average from 23 complete spot analyses by electron microprobe is, Pb 56.1, Sb 25.1, S 18.5, Total 99.6 (all in weight percent); the corresponding chemical formula calculated on the basis of S=11 is; $Pb_{5.16}Sb_{3.93}S_{11.0}$ which fulfils approximately the ideal formula $Pb_5Sb_4S_{11}$. The strongest reflections on the X-ray diffraction pattern are; $3.73\;{\AA}\;(10)$, $3.22\;{\AA}\;(5)$, $3.03\;{\AA}\;(4)$ and $2.82\;{\AA}\;(5)$ and the pattern is in harmonic with space group $C^5_{2h}-P2_1/a$. From the textural evidence of the microscopic observations, the mineral is considered to have been formed at the latest stage of hydrothermal lead-zinc-silver mineralization.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.537-549
• /
• 2007

The characteristics of the mineralization and geology in the northern Mt. Taebaek mining district are found to be similar with those reported from Nevada district where the Carlin-type gold deposit occurs characteristically as repeated metallic ore deposits in space and time. Though two spots of hs and several spots of Sb anomalies were recognized in the Yeongweol area, they have no relationship with any metalliferous mineralization. On the other hand, two spots of As anomaly in the Jeongseon area have shown to be related with metalliferous ore deposits (mainly Ag-Au), and they are closely associated with Sb anomaly. Some elements of altered limestones in the study such as Au, Ag, As, Sb, Cu, Pb, Zn, and Mo area are closely associated together, and are more enriched in the Jeongseon area than in the Yeongweol area. In particular, Sb and As which may reflect the occurrence of the Carlin-type gold deposit are highly enriched. However, the base metals such af Zn and Pb are highly variable according to samples. The patterns of the enrichment factor for Sb and As, as well as those for Ag and Au, are very similar with those reported from the Carlin-type gold deposits in Nevada. These similarities in elemental distribution may imply that hydrothermal ore mineralization in the study areas was possibly originated from a fluid with the characteristics of the Carlin-type gold mineralization found in Nevada, China, and Indonesia. However, the pattern of base metals and Mo are different. This may result from different chemistry and/or mineralogy of host rock in the study areas.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.163-165
• /
• 2005

본 논문에서는 GSM/DCS/USPCS 대역에서 사용할 수 있는 PIFA 형태의 내장형 안테나를 설계하고 이를 제작하였다. 이 안테나는 제한된 공간에서 기본 PIFA에 적절한 슬릿을 구성하여 트리플 밴드를 형성 시켰으며, GSM 대역에서 Maximum Gain -3.25dB$\~$6.37dB, DCS 대역에서 Maximum Gain -0.46dB$\~$2.95dB의 결과를 얻었다. 방사패턴 또한 전 방향성에 가까운 특성을 가지고 있으며 현재 GPRS용 휴대폰에 적용시키고 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.813-827
• /
• 2017

Surveillance cameras installed in tunnels capture the various video frames effected by dynamic and variable factors. In addition, localizing and managing the cameras in tunnel is not affordable, and quality of capturing frame is effected by time. In this paper, we introduce a new method to detect and track the vehicles in tunnel by using surveillance cameras installed in a tunnel. It is difficult to detect the video frames directly from surveillance cameras due to the motion blur effect and blurring effect on lens by dirt. In order to overcome this difficulties, two new methods such as Differential Frame/Non-Maxima Suppression (DFNMS) and Haar Cascade Detector to track cars are proposed and investigated for their feasibilities. In the study, it was shown that high precision and recall values could be achieved by the two methods, which then be capable of providing practical data and key information to an automatic accident detection system in tunnels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.276.1-276.1
• /
• 2016

본 연구에서는 차세대 유연 투명 히터 (Flexible and transparent heater) 제작을 위한 ATO 나노입자-은 네트워크 하이브리드 투명 전극의 특성을 연구하였다. 최적화된 은 네트워크 (Self-assembled Ag network) 투명 전극 상에 20-30 nm의 직경을 가지는 ATO (Sb-doped $SnO_2$) 나노입자를 스프레이 방식으로 상압, 상온에서 코팅하여 인쇄형 ATO-은 네트워크 하이브리드 투명 전극을 구현하였다. 스프레이로 코팅된 투명 ATO 나노 입자는 은 네트워크 전극의 빈 공간을 매워 줌으로써 은 네트워크 간의 연결성 및 표면 조도를 낮춰주어 유연 투명 히터 작동 시 전류의 집중 현상을 막아줄 수 있다. ATO-은 네트워크 하이브리드 투명 전극의 최적화를 위해 스프레이 횟수에 따른 하이브리드 투명 전극의 전기적, 광학적, 표면 특성을 분석하였으며, 최적의 조건에서 14 Ohm/square의 면저항과 66%의 투과도를 가지는 하이브리드 투명 전극을 구현하였다. 또한 FESEM 분석을 통해 ATO-은 네트워크 하이브리드 전극의 표면 및 계면 구조를 연구하고 ATO 코팅이 은 네트워크 전극의 특성에 미치는 영향을 규명하였다. 최적화된 ATO-은 네트워크 하이브리드 투명 전극을 이용하여 유연 투명 히터를 제작하고 전압에 따른 히터의 온도의 변화를 측정하여 차세대 유연 투명 히터용 투명 전극으로 인쇄기반 ATO-은 네트워크 하이브리드 투명 전극의 가능성을 확인하였다.