• 제목/요약/키워드: SAXS

검색결과 79건 처리시간 0.028초

Recent SAXS Progress at NSRRC

  • Jeng U.;Hsu C.-H.;Sun Y.-S.;Lai Y.-H.;Chung W.-T.;Sheu H.-S.;Lee H.-Y.;Song Y.-F.;Liang K. S.;Lin T.-L.
    • Macromolecular Research
    • /
    • 제13권6호
    • /
    • pp.506-513
    • /
    • 2005
  • We review the recent SAXS activity on the 1.5-GeV electron storage ring at the National Synchrotron Radiation Research Center (NSRRC). Typical measurements featuring in grazing incident SAXS for soft materials are illustrated. Complex measurements using simultaneous SAXS/DSC and SAXSIWAXS for the correlations between the crystallization and mesoscale ordering in a polymer blend and a polypeptide-block-polypseudorotaxane diblock copolymer are presented. We also introduce a dedicated SAXS beamline which is planned at NSRRC.

Competition between Phase Separation and Crystallization in a PCL/PEG Polymer Blend Captured by Synchronized SAXS, WAXS, and DSC

  • Chuang Wei-Tsung;Jeng U-Ser;Sheu Hwo-Shuenn;Hong Po-Da
    • Macromolecular Research
    • /
    • 제14권1호
    • /
    • pp.45-51
    • /
    • 2006
  • We conducted simultaneous, small-angle, X-ray scattering/differential scanning calorimetry (SAXS/DSC) and simultaneous, wide-angle, X-ray scattering (WAXS)/DSC measurements for a polymer blend of poly($\varepsilon$-caprolactone)/poly(ethylene glycol)(PCL/PEG). The time-dependent SAXS/DSC and WAXS/DSC results, measured while the system was quenched below the melting temperature of PCL from a melting state, revealed the competitive behavior between liquid-liquid phase separation and crystallization in the polymer blend. The time-dependent structural evolution extracted from the SAXS/WAXS/DSC results can be characterized by the following four stages in the PCL crystallization process: the induction (I), nucleation (II), growth (III), and late (IV) stages. The influence of the liquid-liquid phase separation on the crystallization of PCL was also observed by phase-contrast microscope and polarized microscope with 1/4$\lambda$ compensator.

PTT/PTN 블렌드의 Synchrotron SAXS 분석 (Synchrotron SAXS Analysis of PTT/PTN Blends)

  • 김영호;최재원;이한섭
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.417-419
    • /
    • 2001
  • 폴리(트리메틸렌 테레프탈레이트)(PTT)와 폴리(트리메틸렌 나프탈레이트)(PTN)는 모두 방향족 폴리에스테르계 고분자들이지만 같은 계열의 다른 고분자에 비해 연구가 많이 진행되어 있지 않다 특히 PTT가 포함된 블렌드계의 경우 최근에 들어서야 방향족 다른 폴리에스테르계 고분자와의 블렌딩에 관한 몇가지 보고가 있을 뿐이다[1-3]. (중략)

  • PDF

분무열분해공정에 의한 메조기공 알루미나 제조에 있어 Al 전구체 영향 (Effect of Al Precursor Type on Mesoporous Alumina Particles Prepared by Spray Pyrolysis)

  • 김주현;정경열;박균영
    • 한국분말재료학회지
    • /
    • 제17권3호
    • /
    • pp.209-215
    • /
    • 2010
  • Mesoporous alumina particles were prepared by spray pyrolysis using cetyltrimethyl-ammonium bromide (CTAB) as a structure directing agent and the effect of Al precursor types on the texture properties was studied using $N_2$ adsorption isotherms, small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The surface area and the microstructure of alumina particles were significantly influenced by the Al precursor type. The largest BET surface area was obtained when Al chloride was used, whereas alumina particles prepared from Al acetate had the largest pore volume. According to small-angle X-ray scattering (SAXS) analysis, the alumina powders prepared using nitrate and acetate precursors had a clear single SAXS peak around $2{\theta}=1.0{\sim}1.5^{\circ}$, indicating that regular mesopores with sponge-like structure were produced. On the basis of TEM, SAXS, and $N_2$ isotherm results, the chloride precursor was most profitable to obtain the largest surface area ($265\;m^2/g$), whereas, the nitrate precursor is useful for the preparation of non-hollow mesoporous alumina with regular pore size, maintaining high surface area (${\sim}233\;m^2/g$).

Sol-Gel Transition in Di-(2-ethylhexyl) phthalate-Plasticized Poly(vinyl chloride)

  • Lee, Chang-Hyung;Nah, Jae-Woon;Cho, Kil-Won;Kim, Seong-Hun;Hahn, Ai-Ran
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권10호
    • /
    • pp.1485-1489
    • /
    • 2003
  • The gelation for di-(2-ethylhexyl) phthalate (DEHP)-plasticized poly(vinyl chloride) was studied by measuring time-resolved small-angle X-ray scattering (SAXS) and a flow of the solutions in test tube. It was found that for the gelation there were three regimes. At Regime I, the solution rapidly changed to a gel, and the SAXS intensity showed a peak and the peak intensity increased, keeping the peak angle constant. Applying the SAXS intensity to the kinetic analysis of the liquid-liquid phase separation, it was revealed that the spinodal decomposition proceeded to develop a periodic length of 29.9 nanometer in size, a hydrogen-bonding-type association in polymer rich phase followed, and then it induced fast gelation rate. At Regime II, the gelation slowly occurred and the SAXS intensity was not observed, suggesting that a homogeneous gel network was formed by a hydrogen-bonding. At regime III, the solution was a homogeneous sol.

Sulfonated Polystyrene Ionomers Containing 4-Aminobenzoic Acid Studied by a Small-Angle X-Ray Scattering Technique

  • Song, Ju-Myung;Hong, Min-Chul;Kim, Joon-Seop;Jikang Yoo;Yu, Jeong-A;Kim, Whangi
    • Macromolecular Research
    • /
    • 제10권6호
    • /
    • pp.304-310
    • /
    • 2002
  • In a recent study by the same authors using a DMTA (Dynamic Mechanical Thermal Analyzer), it was found that the 4-aminobenzoic arid (ABA) molecules acted as either a neutralizing agent, or a plasticizer, or a filler, depending on the order of mixing of poly(styrene-co-styrenesulfonic acid) (PSSA), ABA, and NaOH. Subsequent to that study, we here pursued the same topic, i.e., the effect of the addition of CsOH (instead of NaOH) and ABA on the morphology of PSSA, but this time, by using a small-angle X-ray scattering (SAXS) technique. In line with the previous results, the present study with the SAXS technique verified that the order of mixing has a significant effect on the morphology of ionomers. In addition, with the SAXS data and the density values of the ionomers, we attempted to calculate both the number of sulfonate ionic groups per multiplet and the size of the multiplet of the ionomer.

신디오택틱 폴리프로필렌과 아이소택틱 폴리프로필렌의 용융과 재결정화 (Melt and Recrystallization Behavior of Syndiotactic Polypropylene and Isotactic Polypropylene)

  • 이상원;허완수;현욱;이동호;노석균
    • 폴리머
    • /
    • 제27권6호
    • /
    • pp.521-527
    • /
    • 2003
  • 신디오택틱 폴리프로필렌 (sPP)과 아이소택틱 폴리프로필렌 (iPP)은 용융과정에서 결정의 재배열이 나타나며 이와 같은 재결정 현상을 해석하기 위하여 결정화도와 결정구조의 변화, 동역학적 물성을 고찰하였고 DSC, FT-IR, SAXS, DMA를 이용하였다. 본 연구에서 실험된 조건에서는 sPP의 재결정화 현상을 확인할 수 없었으며, iPP는 용융으로부터 냉각되는 속도가 빠르게 될 수록 재가열시 재결정화 현상이 두드러졌다. iPP의 재결정화가 진행되는 동안 tan $\delta$가 0.119에서 0.101로 감소하여 탄성율이 증가한 결과를 보이나 결정화도는 거의 일정하게 유지되었다. 더욱이 재결정 현상이 진행되는 동안 SAXS 산란피크의 반가폭이 약 30% 감소하여 라멜라의 질서가 증가하는 거동을 보였다.

Mechanism of Morphological Transition from Lamellar/Perforated Layer to Gyroid Phases

  • Ahn, Jong-Hyun;Zin, Wang-Cheol
    • Macromolecular Research
    • /
    • 제11권3호
    • /
    • pp.152-156
    • /
    • 2003
  • We investigated epitaxial relations of phase transitions between the lamellar (L), hexagonally perforated layers (HPL), and gyroid (G) morphologies in styrene-isoprene diblock copolymer (PSI) and polyisoprene (PI)/PSI blend using rheology and small angle X-ray scattering (SAXS) techniques. In HPLlongrightarrowG transitions, six spot patterns of G phase were observed in two-dimensitional SAXS pattern. On the other hand, in direct L-longrightarrowG transition without appearance of HPL phase, the polydomain patterns of G phase were observed. From present study, it was understood that direct LlongrightarrowG transition of blend may be suppressed by high-energy barrier of transition and mismatches in domain orientation between epitaxially related lattice planes.