본 연구에서는 1-단자 표면탄성파 공진기를 적용한 사다리형 구조 필터에 대한 전극 두께, 공진기의 반사기 하중 및 정적 정전용량비에 따른 주파수 응답특성의 고찰이 이루어졌으며, 최적화된 매개변수를 이용하여 송신 및 수신단용 RF 필터를 제작하였다. 제작된 필터는 800㎒ 대역 이동통신 시스템에 적용 가능하며, 외부회로에 의한 임피던스 정합이 필요하지 않다. 36°LiTaO₃ 압전기판 위에 Al-Cu(W 3%) 전극을 형성하여 제작하였으며, 3.8㎜×3.8㎜×1.5㎜세라믹 패키지에 실장되었다. 통과대역(25 ㎒)에서의 최소 삽입손실은 2.3 dB, 3-dB 대역폭은 약 33 ㎒, 통과대역 리플은 0.5 dB 미만이며, 약 30 dB 이상의 저지대역 감쇄를 확보할 수 있었다. 또한, 제작된 RF 필터의 내전력성 및 온도 변화에 따른 주파수 응답특성 실험을 통해 약 3.5 W의 내전력성과 -20℃∼80℃에서 최대 0.09 dB/℃의 3-dB 삽입손실 변화를 측정할 수 있었다.
The saw dust of tropical hardwood, Nyatoh(Palaquium Spp.), was used as a raw material for the preparation of the high valued microcrystalline cellulose(MCC). Three pulping methods, soda pulping, Kraft pulping, and acid-sulfite pulping were applied to obtain cellulose from the saw dust. The residual impurities were removed with the additional bleaching processes: (A) $ClO_2{\rightarrow}H_2O_2$; (B) $ClO_2{\rightarrow}O_3$; (C) $O_3$. For the acid treatment for MCC preparation, the $H_2SO_4$, with three concentration, 20%, 40%, 60% were applied and the effects of $H_2SO_4$ concentration on the properties of MCC were evaluated. The results indicated that the MCC obtained by acid-sulfite pulping followed with $O_3$ treatment and 40% $H_2SO_4$ treatment showed less residual lignin, higher brightness and crystallinity than that of Avicel MCC.
Generally, a metal slitting saw is plain milling cutter with thickness less than 3/16 inch. This is used for cutting a workpiece that high dimensional accuracy and surface finish is necessary. A small thin milling cutter like a metal slitting saw is useful for machining a narrow groove. In this case, built up edge(BUE) is severe at each tooth and affects the surface integrity of the machined surface and tool wear. It is well known that tool geometry and cutting conditions are decisive factors to remove BUE. In this paper, we optimized the geometry of the milling cutter and selected cutting conditions to remove BUE by the experimental investigation. The experiment was planned with Taguchi method based on the orthogonal array of design factors such as coating, rake angle, number of tooth, cutting speed, feed rate. Response table was obtained from the number of built-up edge generated at tooth. The optimized tool geometry and cutting conditions could be determined through response table. In addition, the relative effect of factors was identified bh the analysis of variance (ANOVA). Finally, coating and cutting speed turned out important factors for BUE.
무선 센서 네트워크 기술은 상시적으로 물리정보를 획득할 수 있기 때문에 광범위한 응용분야에서 수요가 증가하고 있다. 또한 무선 센서 네트워크에 적용되는 무선 센서 시스템은 일반적으로 배터리를 장착하여 회로에 전력을 공급해주는 방식을 사용한다. 그러나 센서가 적의 기지근처, 인체 조직내 삽입, 건물의 내벽 등과 같이 배터리를 교체할 수 없는 곳에 위치해 있는 경우, 반영구적인 사용에 제한이 있기 때문에 무전원 무선 센서의 개발이 절실히 필요하다. 특히, 이러한 센서를 새롭게 개발하고 검증하려며 센서의 주파수 특성을 분석해야 하는데 기존에는 단순한 파형만을 분석할 수 있는 일반적인 계측기를 사용할 수밖에 없었다. 따라서 본 논문에서는 기존의 계측기보다 유연성 있고 효율적으로 무전원 무선 센서의 개발과 검증이 가능하도록 신호의 모니터링과 신호발생기를 에뮬레이션하는 NI LabVIEW기반의 SAW System Analyzer와 SAW Reader Emulator 시스템을 설계하고 개발하였다.
낮은 형상요소를 갖는 표면탄성파 대역통과 필터의 주파수 특성을 구현하기 위하여 35° Y-cut Quartz 표면에 빗살무늬 변환기를 형성시켜 모의실험을 수행하였으며, 전극재료로는 Al을 이용하였다. 이 모의실험에서 얻은 조건들로부터 필터를 설계하였으며, 필터의 입력단에는 apodization weighted형 빗살무늬 변환기를 이용하고, 출력단에는 withdrawal weighted형 빗살무늬 변환기로 필터를 구성하였다. 또한, 입·출력 빗살무늬 변환기의 전극 수는 리플의 영향을 최소화하기 위해 Kaiser-Bessel 창함수를 이용하였으며, 각각 2200쌍과 1000쌍으로 하였다. 그리고, 빗살무늬 변환기 전극의 폭은 6㎛, 간격은 5.75㎛ 및 두께는 표면탄성파 파장과의 비를 고려해 6000Å으로 할 때 최적의 결과를 얻을 수 있었으며, 구경은 임피던스 정합을 위해 2mm로 하였다. 제작한 표면탄성파 대역통과 필터의 중심주파수는 70MHz, 형상요소는 1.3이하, 1.5dB에서의 통과 대역은 1.3MHz, 저지대역은 -45dB, 삽입손실은 19dB, 통과 대역폭 내의 리플은 1dB정도로 측정되었다. 따라서, 제작한 필터의 주파수 응답과 특성은 설계조건과 잘 일치하였다.
우리나라의 소규모 항만이나 어항인 경우에 설계파는 낮지만 지반조건이 좋지 않은 경우가 많기 때문에 기존의 방파제 축조공법을 이용할 경우 비용이 커질 뿐만 아니라 건설재료의 확보가 어려운 실정이다. 따라서 설계파가 비교적 낮은 경우에 저렴하게 적용할 수 있는 새로운 형식의 방파제에 대한 수요가 증가함에 따라, 본 연구에서는 지반에 대한 특별한 처리 없이 간편하게 설치할 수 있는 가로널식 방파제를 개발하였다. 이 논문은 개발된 가로널식 방파제에 대해 방파제의 근입깊이 및 보강기법, 배치 형태 등 다양한 조건에 따른 방파제의 횡방향 거동을 분석한 것으로 이를 위해 느슨한 모래지반을 대상으로 모형 토조실험을 수행하였다. 실험 결과, 근입깊이 이외에도 경사 버팀보나 앵커등 보강재의 효과 및 방파제 배치 형식에 따른 경향을 확인하였다.
We report a finding of fast(exceeding 2,000 K/s) heating of polydimethylsiloxane(PDMS), one of the most commonly-used microchannel materials, under cyclic loadings at high(~MHz) frequencies. A microheater was created based on the finding. The heating mechanism utilized vibration damping of sound waves, which were generated and precisely manipulated using a conventional surface acoustic wave(SAW) microfluidic system, in PDMS. The penetration depths were measured to range from $210{\mu}m$ to $1290{\mu}m$, enough to cover most microchannel heights in microfluidic systems. The energy conversion efficiency was SAW frequency-dependent and measured to be the highest at around 30 MHz. Independent actuation of each interdigital transducer(IDT) enabled independent manipulation of SAWs, permitting spatiotemporal control of temperature on the microchip. All the advantages of this microheater facilitated a two-step continuous flow polymerase chain reaction(CFPCR) to achieve the billion-fold amplification of a 134 bp DNA amplicon in less than 3 min. In addition, a technique was developed for establishing dynamic free-form temperature gradients(TGs) in PDMS as well as in gases in contact with the PDMS.
Flow-excited acoustic resonance in ducted cavities can produce high levels of acoustic pressure that may lead to severe damage. This occurs when the flow instability over the cavity mouth, which is created by the free shear layer separation at the upstream edge, is coupled with one of the acoustic modes in the accommodating enclosure. Acoustic resonance can cause high amplitude fluctuating acoustic loads in and near the cavity. Such acoustic loads could cause damage in sensitive applications such as aircraft weapon bays. Therefore, the suppression and mitigation of these resonances are very important. Much of the work done in the past focused on the fluid-dynamic oscillation mechanism or suppressing the resonance by altering the edge condition at the shear layer separation. However, the effect of the downstream edge has received much less attention. This paper considers the effect of the impingement edge geometry on the acoustic resonance excitation and Strouhal number values of the flow instabilities in a ducted shallow cavity with an aspect ratio of 1.0. Several edges, including chamfered edges with different angles and round edges with different radii, were investigated. In addition, some downstream edges that have never been studied before, such as saw-tooth edges, spanwise cylinders, higher and lower steps, and straight and delta spoilers, are investigated. The experiments are conducted in an open-loop wind tunnel that can generate flows with a Mach number up to 0.45. The study shows that when some edge geometries, such as lower steps, chamfered, round, and saw-tooth edges, are installed downstream, they demonstrate a promising reduction in the acoustic resonance. On the other hand, higher steps and straight spoilers resulted in intensifying the acoustic resonance. In addition, the effect of edge geometry on the Strouhal number is presented.
The purpose of this study is to examine features of parts of Jikryung and relations among the features. Results of the study can be described as follows. 1. The short front and long rear of Jikryung was changed into the long front and long rear of the dress in the late 16th century. Kalgit of quasi-square style as double collar was changed into that of common collar in the late 16th century and then into common semi-circle collar in the early 17th century, when double Sup was also changed Into single Sup. Narrow sleeves of Jikryung were replaced by bean chaff-shaped in the late 16th century and then by wide ones in the early period of the next century. The shape of the side hem of Jikryung was changed from rectangle into trapezoid in the early 17th century Triangle-shaped Moo was changed into trapezoid-shaped one in the late 16th century and then again into triangle in the late 17th century 2. Changes in shapes of the parts of Jikryung were made with them correlated. The collar of Jikryung saw change in its form from double to common as its width was reduced. Double Sup was changed into single one and the narrow, short coat string into the long one as Jikryung became a dress needing less adjustment. The sleeves widened as the length of whajang increased. The side hem of Jikryung saw change in its shape from rectangular to trapezoidal one as its position was changed. Trapezoidal Moo was replaced by triangular one as the sleeve of Jikryung was changed in shape. 3. Changes in shapes of the parts of Jikryung influenced the aesthetic beauty of the dress itself In its first period, Jikryung was simple with long, slim silhouettes. In its second period, the dress was rich with increased volume. Finally in its third period, the dress was characterized by the harmony of simpleness and richness.
Purpose: The purpose of this study was to examine the eyesight and life habits of college students in an attempt to provide some information on the protection of their eyesight. Methods: The subjects in this study were 311 students in the department of dental technology at a college of health, on whom a survey was conducted. A crosstabulation analysis was carried out to show the joint distribution of general characteristics and several variables involving the use of glasses or contact lenses and life habits. Results: 77.5% of the students currently wore glasses due to weak sight. 9.3% took an eye test on a regular basis, and 31.2% did that every six months. As for the length of the length of daily mean reading time, 55.3% spent one hour or less reading books. The most common distance between eyes and books during their reading(44.7%) was 21 to 25. Concerning a reading posture, the biggest group(54.3%) lay down or lay on their face while they read books. 45.0 % spent less than an hour watching TV per day on average, and 27.0% were on the computer for 30 minutes to less than an hour per day on average. The greatest group(63.0%) made use of basic indoor lighting when they were on the computer at night, and 62.1% saw eye doctors to take an eye test. In relation to how to protect eyesight, the biggest group(50.5%) spent less time being on the computer. Conclusion: As the eyesight of college students fails due to reading, TV, computer, and improper ways and posture of doing or using those things, every college definitely should provide education on eye health as one of general education courses.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.