• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 1998

SAW filters of transversal type were fabricated on some piezoelectric substrate of the LN 128 $^{\circ}$ Y-X waters through the simulation in which the number of IDT and window function were changed for the required frequency, and the mask making. Their IDT spacing and width were 1.63$\mu\textrm{m}$, 1.239$\mu\textrm{m}$, respectively. Titanium thin films having different thicknesses were introduced between the Al electrode and the substrate for improving the power resistance strength due to its high temperature durability and good adhesion characteristics. All of specimens showed similar insertion loss results, which means the possibility of introducing the Ti layer though it is known to have a higher resistivity leading to a worse insertion loss result. Ti inserted specimens had a better power durability than that of pure Al electrode though their thickness had no effect on the performance.

• 센서학회지
• /
• 제9권4호
• /
• pp.327-333
• /
• 2000

중심주파수가 340MHz이고 $1.435{\mu}m$의 IDT 전극 폭과 간격을 가진 양방향 전송형 SAW필터를 LN $128^{\circ}$ Y-X 웨이퍼의 압전기판으로 제작하였다. 전력 내구성을 개선시키기 위한 방안으로 Al에 비해 밀도가 크고, 열팽창계수가 작으며 접착력이 좋은 Ti를 압전체기판과 전극물질인 Al 사이에 증착시켰다. Ti의 두께 및 열처리 온도가 내전력 특성에 미치는 영향을 분석하였는데, Ti층이 두꺼울수록 내전력이 개선되었으며, 특히 $300^{\circ}C$에서 열처리하였을 때 가장 우수하였다.

• Journal of Biosystems Engineering
• /
• 제29권4호
• /
• pp.317-322
• /
• 2004

This study was conducted to evaluate the feasibility of identifying freshness of beef using a surface acoustic wave (SAW) sensor based electronic nose. The beef was stored at 5$^{\circ}C$ and aroma was measured with the passage of time. Chromatographic analysis of the odor showed that number of volatile components and their amounts were rapidly increased after 19 days of storage. Classifying beefs according to their storage days was possible using principle component analysis (PCA). Classifying beefs processed from four different origins was also possible with PCA analysis of odor. This study shows that electronic nose can be applied to beef freshness evaluation and classification of its origin.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.343-345
• /
• 2015

현재 SAW Device는 좁은 대역폭으로 원하는 주파수만 통과 시키는 특성을 이용한 주파수 필터로 사용되고 있다. 하지만 무전원으로 영구적인 사용이 가능하다는 장점이 있기 때문에 다양한 분야로 활동 분야가 넓어지고 있다. 이러한 SAW Device를 이용한 센서 태그는 많은 연구가 이뤄졌지만, 아직 Reader Platform에 대한 개발이 미비한 상태이다. SAW Device를 이용한 ID Tag의 값을 읽는 방법에는 시간 영역 샘플링(TDS) 방식과 주파수 영역 샘플링(FDS) 방식이 있다. 본 연구에서는 고속의 샘플링을 요구하지 않아 상대적으로 느린 샘플링 속도로 고속의 프로세싱을 요구하는 FDS 방식을 사용한다. 기존의 FDS 방식의 Reader Platform은 PC를 통하여 ID를 검출하는 방식이었으나 Cortex-A9 프로세서를 기반으로 하여 저가, 소형, 실시간의 임베디드 Reader Platform을 구현한다.

• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.47-50
• /
• 1999

The term adaptive control is often used to describe recent advances in welding process control but strictly this only applies to system which are able to cope with dynamic changes in system performance. In welding applications, the term adaptive control may not imply the conventional control theory definition but may be used in the more descriptive sense to explain the need for the process to adapt to the changing welding conditions. This paper proposed a methodology for obtaining a good bead appearance based on multi-torches welding system with the vision system in SAW. The methodologies for adaptive filling control used the welding current/voltage, arc voltage/welding current/wire feed speed combination and welding speed by using the vision sensor. It was shown that the algorithm for the welding current/voltage combination and welding speed revealed the sound weld bead appearance compared with that of the voltage/current combination.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.13-19
• /
• 2009

상대습도와 $CO_2$ 기체의 실시간 동시 감지가 가능한 표면탄성파(SAW: Surface Acoustic Wave) 기반의 무선, 무전원 센서가 개발되었다. 본 소자는 $41^{\circ}YX\;LiNbO_3$ 기판 위에 만들어졌으며, 반사 지연선의 구조로 이루어져 있다. 본 논문의 반사 지연선은 양방향 감지가 가능한 Interdigital transducer(IDT)와 10개의 리플렉터(reflector)로 이루어져 있다. 감지 필름은 Teflon AF 2400과 친수성의 $SiO_2$층이 이용되었으며, 이는 각각 $CO_2$와 상대 습도의 감지를 담당한다. 소자의 제작에 앞서 최적의 소자 설계 조건들을 도출하기 위해 Couple of mode(COM) 모델링이 실시되었다. 시뮬레이션 결과를 반영하여 소자의 제작이 진행되었으며, 네트워크 분석기를 이용하여 무선 측정이 실시 되었다. 시간 영역에서 측정된 반사계수 $S_{11}$은 높은 신호 대 잡음 비, 작은 신호 감쇠, 적은 허위 피크를 보였다. 제작된 소자는 각각 $75{\sim}375ppm$의 $CO_2$ 범위와 $20{\sim}80%$의 상대 습도 범위에서 측정되었으며, 각각 $2^{\circ}/ppm$의 $CO_2$ 민감도, $7.45^{\circ}/%$의 상대습도에 대한 민감도를 보였고, 좋은 선형성과 반복성을 보였다. 또한 민감도 측정 과정에서 온도와 습도의 보상 과정을 거쳐 더욱 정확한 민감도를 갖도록 하였다.

• 센서학회지
• /
• 제10권2호
• /
• pp.142-147
• /
• 2001

인터디지털 표면음파 변환기의 교차장 모델에 기초한 전송선 등가회로를 사용하여 SPICE에 의한 SAW 필터의 효율적인 시뮬레이션 기법을 제안하였다. 표면음파의 전파를 전송선으로 모델하므로 인터디지털 변환기의 등가회로에서는 주파수 의존 회로소자가 필요하지 않게 된다. 그래서 주파수 의존 회로소자에 대한 등가회로를 근사적으로 구하지 않아도 되고, 필터의 등가회로에 작은 수의회로소자를 사용하므로 시뮬레이션 시간도 많이 단축된다. 삽입손실, 입력 어드미턴스, 통과대역 리플, 그리고 고조파 주파수 응답과 같은 SAW 필터 특성에 대한 시뮬레이션을 통하여 제안된 기법의 유용성을 보였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.390-396
• /
• 2010

An 80MHz surface acoustic wave (SAW)-based gyroscope utilizing a progressive wave was developed on a piezoelectric substrate. The developed sensor consists of two SAW oscillators in which one is used for sensing element and has metallic dots in the cavity between input and output IDTs. The other is used for a reference element. Coupling of mode (COM) modeling was conducted to determine the optimal device parameters prior to fabrication. According to the simulation results, the device was fabricated and then measured on a rate table. When the device was subjected to an angular rotation, oscillation frequency differences between the two oscillators were observed because of the Coriolis force acting on the metallic dots. Depending on the angular rate, the difference of the oscillation frequency was modulated. The obtained sensitivity was approximately 52.35 Hz/deg.s within the angular rate range of 0~1000 deg/s. The performances of devices with three IDT structures for two kinds of piezoelectric substrates were characterized. Good thermal stability was also observed during the evaluation process.

• 한국식품조리과학회지
• /
• 제22권3호통권93호
• /
• pp.299-306
• /
• 2006

The numerous varieties of coffee beans contain a wide range prices and qualities. While the varieties of green coffee beans can generally be distinguished by their appearance, this visual criterion is impossible after the roasting process. Therefore, we need to develop a classification method or device. In this study, the potential of a new type of electronic nose, fast gas chromatography based on a surface acoustic wave sensor(SAW), was evaluated for the classification of origins and blended commercial brands in roasted coffee beans. Eight blended commercial brands and the origins of four similarly roasted ground coffee beans(with no significant difference of color) were rapidly(90 sec/sample) classified. The reproductive results were easily understandable over the aroma image pattern by $VaporPrint^{TM}$. In conclusion, GC-SAW electronic nose can be applied to the classification of origins and commercial brands in roasted ground coffee beans and to e evaluation of the similarities and differences of volatile pattern between samples.