• E2M - 전기 전자와 첨단 소재
• /
• 제8권1호
• /
• pp.48-55
• /
• 1995

A surface acoustic wave (SAW) sensor for the detection of odorants has been constructed by depositing various phospholipids and fatty acids onto the surface of the SAW device. The characteristics of a SAW device operating at 310 MHz deposited with silicon monoxide were analyzed. Menthone, amylacetate, acetoin, and other organic gases show different affinities to the coated lipids. An explanation is given for different odorant affinities based on the monolayer properties of phospholipids. The identification of odorants depending on the tkpe of lipid used for coating is discussed in terms of the similarity of their normalized resonant frequency shift patterns. Using a number of different lipid-coated SAW devices, odorants can be identified by a computerized pattern recognition algorithm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.647-655
• /
• 2003

Commonly used SAW duplexers have a difficulty on manufacture so that a transmission line is printed on the package or an LTCC multi-layer is needed because a quarter-wave transmission line which is a kind of an isolation network is applied to the SAW duplexers. In this study, new structures of one chip type SAW duplexers are proposed. In the proposed structure, Tx and Rx SAW ladder filters and isolation networks are located on a single 36LiTaO$_3$ piezoelectric substrate. The manufacture process is very simple than commonly used product. It is possible to improve tile performance by means of optimizing the micro-strip line lumped elements. It is easy to integrate and modulate with other surrounding components. The optimal design techniques can be applied to other kind of multi-port devices.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.766-771
• /
• 2008

SAW Device는 필터이외에도 각종 물리 센서나 화학센서 혹은 ID Tag로 다양한 분야로 활용범위가 확대됨에 따라 다양한 SAW Device를 사용하기 위한 플랫폼이 요구된다. 현재 SAW ID나 Sensor는 많은 발전을 해왔지 만 SAW Sensor를 활용 할 수 있는 플랫폼의 발전은 미흡하기 때문에 본 논문에서는 ID Tag 나 Sensor를 비롯한 여러 SAW Sensor를 보다 편리 하게 활용할 수 있는 플랫폼에 대하여 연구 하였다. 본 논문에서 제안하는 플랫폼은 SAW Device를 인식 할 수 있는 RF 모듈과 SAW Device의 응답신호를 처리 할 수 있도록 고성능 프로세서를 이용한 매인 모듈로 구성하였다. 매인 모듈에서는 고성능 프로세서를 이용함으로서 GUI 환경 기반의 플랫폼을 구현하여 사용자들이 SAW Device에서 수집된 정보를 보다 편리하고 알아보기 쉽게 사용할 수 있도록 설계하였다. 본 논문에서 사용한 플랫폼은 ARM9 코어의 프로세서를 기반의 플랫폼으로 Windows Embedded CE 6.0 OS를 사용하여 사용자에게 더욱 편리한 인터페이스를 제공할 수 있도록 하고, 개발자들에게는 센서를 활용한 다양한 어플리케이션을 보다 쉽게 적용할 수 있도록 하였다.

• 한국음향학회지
• /
• 제14권4호
• /
• pp.64-73
• /
• 1995

본 연구에서는 카이저 창함수를 이용하여 이동통신용 표면탄성파 필터를 설계하기 위한 CAD를 제작하였다. 제작된 CAD는 아포다이제이션 형태로서 하중함수가 주어진 빗살변환기와 정규형형태의 빗살변환기, 위드드롤로 형태로서 하중함수가 주어진 빗살 변환기 한쌍으로된 변환기와 아포다이제이션 형태로서 하중함수가 주어진 빗살변화기와 정규형 변환기, 반사기를 설치한 공진기 형태의 필터로서 구성되어 있다. 중심 주파수가 222MHz에서 343MHz 영역내의 표면탄성파 필터를 제작된 CAD로 모의 실험 하였다. 본 연구에서 제작된 CAD는 표면탄성파 필터로써 응용될 뿐만 아니라 디지틀 FIR 필터에도 응용될 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• 센서학회지
• /
• 제16권3호
• /
• pp.240-245
• /
• 2007

AlN thin film for SAW filter application was deposited on (100) silicon, sapphire, $Si_{3}N_{4}$/Si, and $Al_{2}O_{3}$/Si substrates by reactive magnetron sputtering method, respectively. The structural characteristics were dependent on the structure of substrates. Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and Atomic Force Microscope (AFM) have been used to analyze structural properties and preferred orientation of AlN thin films. Preferred orientation and SAW characteristic of AlN were improved by insertion of $Al_{2}O_{3}$ buffer layer. Insertion loss of SAW devices using AlN/Si and AlN/$Al_{2}O_{3}$/Si were about 33.27 dB and 30.20 dB, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.79-83
• /
• 2014

In this paper, SAW devices are fabricated using various IDT shape(Single/Double) to check an effect of the IDT on SAW device. And based on theory of a particle velocity moved by SAW and IDT, a particle velocity is measured and calculated. Depend on insert power, a particle velocity using Single-IDT SAW device is about two times bigger than Double-IDT SAW device and it's almost same with a theoretical different.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.90-93
• /
• 1994

A surface acoustic wave(SAW) sensor for the detection of odorants has been constructed by depositing various phospholipids and fatty acids onto the surface of the SAW device. Applying the Langmuir-Blodgett technique. it was possible to deposit the optimal number of layer which was found to be between 10 and 20. The characteristics of a SAW device operating at 310 MHz deposited with phosphatidyl choline were analysed. Menthone, amylacetate, acetion, and other organic gases sho7\\\\`ed different affinities to the coated lipids. An explanation is given for differant odorant affinities based on the monolayer properties of phospholipids. The identification of odorants depending on the type of lipid used for coating is discussed in terms of a comparison of their normalized resonant frequency chi It pat terns. Using a number of different lipid-coated SAW devices. odorants can be identified by a computerized pattern recognition algorithm.

• 한국음향학회지
• /
• 제7권4호
• /
• pp.86-97
• /
• 1988

본 논문에서는 비등방성 매질에서의 2차원적 회절현상을 수학적으로 모델링하였다. 비등방성 매질의 2차 포물선 근사법과 프레즈넬 근사법을 적용하기 위하여 전파방향에 따른 표면파 속도의 역수를 포물선으로 가정하였다. 128${\circ}$ Rotated $LiNbO_{3}$ 기판을 사용한 SAW IF Bandpass Filter에서의 회절현상을 모의 설계하여 그 결과를 회절현상이 없는 이상적인 경우와 비교하였다. 또한 전산화 모의 설계 결과와 실제로 제작된 SAW Filter 특성결과를 비교하여 $LiNbO_{3}$ 기판을 사용한 SAW Filter에서도 프레즈넬 근사법이 대체적으로 일치하는 것을 알 수 있었다.