• Title/Summary/Keyword: SAT#1

Search Result 334, Processing Time 0.027 seconds

Subcooled Burnout Heat Flux on a Heated Surface with Impinging Water Jet (충돌수분류(衝突水噴流)에 의한 서브쿨 Burnout열류속(熱流束)에 관한 연구)

  • Ohm, K.C.;Lee, J.S.;Park, S.Y.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.8 no.4
    • /
    • pp.527-536
    • /
    • 1996
  • Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.

  • PDF

Analysis of The Dual-Emitter LIGBT with Low Forward Voltage Loss and High Lacth-up Characteristics (낮은 순방향 전압 강하와 높은 래치-업 특성을 갖는 이중-에미터 구조의 LIGBT에 관한 분석)

  • Jung, Jin-Woo;Lee, Byung-Seok;Park, San-Cho;Koo, Yong-Seo
    • Journal of IKEEE
    • /
    • v.15 no.2
    • /
    • pp.164-170
    • /
    • 2011
  • In this paper, we present a novel Lateral Insulated-Gate Bipolar Transistor(LIGBT) structure. The proposed structure has extra emitter between emitter and collector of the conventional structure. The added emitter can significantly improve latch-up current densities, forward voltage drop (Vce,sat) and turn-off characteristics. From the simulation results, the proposed LIGBT has the lower forward voltage drop(1.05V), the higher latch-up current densities($2.5{\times}10^3\;A/{\mu}m^2$), and the shorter turn-off time(7.4us) than those of the conventional LIGBT.

A Study on Analysis through the Probability and Statistics of the Curriculum and Text book in Elementary, Middle and High School (초.중.고교 확률.통계의 효율적인 지도에 관한 연구)

  • 오후진;유병대
    • Journal of the Korean School Mathematics Society
    • /
    • v.1 no.1
    • /
    • pp.59-67
    • /
    • 1998
  • Probability and statistics is an important section in mathematics which is deeply related to everyday living, natural science and social science. In spite of its importance, many students will throw away it because it becomes very harder as its step(stage) deepens and probability and statistics' relative importance is very small in Korea-SAT(the test of college entrance in Korea). Therefore, by analyzing the involvement carefully between the curriculum in the elementary, middle, high school and the text book, by studying the problem and improvement direction, it is necessary to investigate an effective teaching method. This study intends to give the students the confidence, interests, and accomplishment motive about probability and statistics field and to make a rational and creative decision-making through mathematical speculation by proposing an effective teaching method through analyzing an existing facts in school's probability and statistics field. The contents of this study are composed of four chapters. Chapter three looks into the mathematical curriculum in the elementary, middle, high school and its teaching meaning, the outline of contents, some tips on teaching and problems and presents an effective and concrete teaching method on the basis of the theoretical background in the chapter two. Chapter four is a conclusive part and gives the general improvement and intentional direction in educating the probability and statistics.

  • PDF

Information Architecture Design using Eye-Tracking Method (Eye-Tracking Method를 이용한 메뉴구조 설계 및 평가)

  • Park, Jong-Soon;Lee, Sun-Jung;Myung, Ro-Hae
    • 한국HCI학회:학술대회논문집
    • /
    • 2007.02b
    • /
    • pp.15-20
    • /
    • 2007
  • 본 연구는 시선 추적 방법(Eye-Tracking Method)을 이용한 디지털 컨버전스 제품의 정보 설계 및 평가에 관한 방법론을 제시하였다. Eye-tracking 데이터는 visual search의 효율성 뿐 아니라 타겟의 유의미성이나 가시성등을 측정하는데 유익하다. 응시 횟수와 응시 시간을 통하여 사용자의 심성 모형에 따른 시선 행위와 제품 메뉴 구조간의 전체적인 일치도를 정량적으로 분석하였고, 각 메뉴 item의 세부적인 인지 반응 정도를 평가하였다. 컨버전스 제품의 한 예로 휴대폰을 선정하여 실험을 실시하였으며, 활성화 확산 실험(SAT)을 수행하여 메뉴 항목 상호간의 인지반응 정도를 통한 문제점을 도출한 후 사용자 시나리오를 작성하였다. 1차 테스트를 통하여 피실험자의 시나리오 수행 시 어려움을 알 수 있었으며, 1차 테스트의 결과와 인터뷰 결과를 바탕으로 프로토타입의 메뉴명을 개선하여 2차 테스트를 실시하였다. 실험 결과 개선 전보다 후의 응시 횟수, 응시 시간 또한 감소하여 수행도가 향상됨으로 메뉴 구조의 개선된 결과를 가져왔다. 본 연구는 인간의 눈 움직임 측정치 결과를 토대로 사용자 심성 모형에 부합하여 누구나 접근이 쉬운 정보 구조를 설계할 수 있었다. 그러므로 본 연구에서 제시하는 Eye-tracking Method는 디지털 컨버전스로 인한 복잡한 정보 구조의 설계와 평가에 기여할 것으로 보인다.

  • PDF

Preferred Indoor Temperature of College Students in Summer by Body Composition (체성분 구성에 따른 대학생의 여름철 실내 쾌적온도)

  • Shim, Huen-Sup;Jeong, Woon-Seon
    • The Korean Journal of Community Living Science
    • /
    • v.22 no.1
    • /
    • pp.155-161
    • /
    • 2011
  • This study was designed to present the preferred indoor temperature of college students in summer based on their body composition. A total of 19 subjects, 10 females and 9 males, participated in this study. They sat in a climatic chamber controlled at $27^{\circ}C$ wearing a short sleeved shirt and short trousers. The air temperature decreased by $0.5^{\circ}C$ every 10 minutes until it reached $24^{\circ}C$. Oxygen uptake, rectal temperature, and skin temperature, subjective sensation were measured and recorded. Females increased the rectal temperature and decreased mean skin temperature in an air conditioned environment, showing better physiological responses. But they felt more thermal discomfort than males. The preferred indoor temperature of college students in summer was $25.3^{\circ}C$, $25.7^{\circ}C$ for females and $24.97^{\circ}C$ for males.

Design of Menu Driven Interface using Error Analysis (에러 분석을 통한 사용자 중심의 메뉴 기반 인터페이스 설계)

  • Han, Sang-Yun;Myeong, No-Hae
    • Journal of the Ergonomics Society of Korea
    • /
    • v.23 no.4
    • /
    • pp.9-21
    • /
    • 2004
  • As menu structure of household appliance is complicated, user's cognitive workload frequently occurs errors. In existing studies, errors didn't present that interpretation for cognitive factors and alternatives, but are only considered as statistical frequency. Therefore, error classification and analysis in tasks is inevitable in usability evaluation. This study classified human error throughout information process model and navigation behavior. Human error is defined as incorrect decision and behavior reducing performance. And navigation is defined as unrelated behavior with target item searching. We searched and analyzed human errors and its causes as a case study, using mobile phone which could control appliances in near future. In this study, semantic problems in menu structure were elicited by SAT. Scenarios were constructed by those. Error analysis tests were performed twice to search and analyze errors. In 1st prototype test, we searched errors occurred in process of each scenario. Menu structure was revised to be based on results of error analysis. Henceforth, 2nd Prototype test was performed to compare with 1st. Error analysis method could detect not only mistakes, problems occurred by semantic structure, but also slips by physical structure. These results can be applied to analyze cognitive causes of human errors and to solve their problems in menu structure of electronic products.

The Inter- and Intra-rater Reliability of the Functional Reach Test in Subjects With Spinal Cord Injury (척수손상환자의 Functional Reach Test의 신뢰도)

  • Kim, Young-Rok;Min, Won-Kyu
    • Physical Therapy Korea
    • /
    • v.6 no.3
    • /
    • pp.51-58
    • /
    • 1999
  • In general, sitting balance is decreased in subjects with spinal cord injury. The purpose of this study was to evaluate the inter- and intra-rater reliability of the Functional Reach Test (FRT) which is used to measure sitting balance. The subjects of this study were 26 persons with spinal cord injury, and they were divided into three groups according to their injury level. Group I, II and III consisted of the following $C_5{\sim}C_8$ quadriplegics, $T_1{\sim}T_4$, and $T_9{\sim}T_12$ paraplegics, respectively. Subjects sat on a mat table that was set at an 80 degree inclination. During three sessions, the length subjects could reach in the FRT test was measured by three physical therapists, and compared to each other. The results showed that intraclass correlation coefficients (2,1) were above 0.97 and inter-rater difference was not statistically significant. The one-way ANOVA demonstrated that reach differed between groups with lower thoracic lesion and the other test groups. In conclusion, we think modified FRT is useful and reliable method to measure the sitting balance in subjects with spinal cord injury.

  • PDF

A Study on Side Slope Determination of Earth Dam (EARTH DAM의 비탈면 기울기 결정에 관한 연구)

  • 이원희;김시원
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.23 no.1
    • /
    • pp.86-102
    • /
    • 1981
  • The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.

  • PDF

Population Dynamics and Reproductive Biology of Leptochela sydniensis in the Southwestern Waters of Korea (우리나라 서해남부 해역에 출현하는 둥근돗대기새우 (Leptochela sydniensis)의 개체군 동태 및 생식생태)

  • OH Chul Woong;CHOI Jung Hwa
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.36 no.6
    • /
    • pp.646-653
    • /
    • 2003
  • Investigations were made on the population structure, sex ratio, growth, and recruitment patterns of Leptochela sydniensis in the southwestern coastal areas of Korea, between May 2000 and December 2001. Spawning period, fecundity, brood loss, reproductive output, and size at sexual maturity also were examined. The results of the sex ratio showed that females were more numerous than males during the overall study period. Parameters of growth were estimated using the modified von Bertalanffy growth function (VBGF) model incorporating seasonal variation into growth. Females grew somewhat faster and reached a larger size than males $(L\infty=12.80\;mm\;CL\;and\;K=0.70\;yr^{-1}\;or\;females,\and\;L\infty=12.08\;mm\;CL\;and\;K=0.69\;yr^{-1}$ for males). The structure of recruitment patterns obtained by the FiSAT program indicated one normally distributed group. Based on the occurrence of ovigerous females and the gonadosomatic index (GSI), the main spawning season was from June to August. Analysis of covariance indicated that brood loss was not observed during the incubation period. The size at which $50\%$ of females are mature is estimated as 5.48 mm CL.

Thermodynamic Interactions Among Carbon, Silicon and Iron in Carbon Saturated Manganese Melts (탄소 포화 Mn 합금 용액내 C, Si 및 Fe 사이의 열역학적 상호작용)

  • Paek, Min-Kyu;Lee, Won-Kyu;Jin, Jinan;Jang, Jung-Mock;Pak, Jong-Jin
    • Korean Journal of Metals and Materials
    • /
    • v.50 no.1
    • /
    • pp.45-51
    • /
    • 2012
  • Thermodynamics of carbon in manganese alloy melts is important in manufacturing low carbon ferromanganese and silico-manganese alloys. In order to predict the carbon solubility in liquid $Mn-Si-Fe-C_{sat}$ alloys as a function of melt composition and temperature, thermodynamic interactions among carbon, silicon and iron in carbon saturated liquid manganese should be known. In the present study, the effects of silicon and iron on the carbon solubility in Mn-Si, Mn-Fe and Mn-Si-Fe melts were measured in the temperature range from 1673 to 1773 K. The carbon solubility decreases significantly as silicon and iron contents increase in liquid manganese alloy. The interaction parameters among carbon, silicon and iron in carbon saturated liquid manganese were determined from the carbon solubility data and the Lupis' relation for the interaction coefficient at constant activity.