• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.6
• /
• pp.513-519
• /
• 2007

Typical surgical methods for the treatment of mandibular fractures include intermaxillary-fixation (IMF) for obtaining temporary intraoperative occlusion. Traditionally IMF has been achieved with arch-bars or interdental eyelet wiring. However, these techniques are time-consuming procedures, can produce periodontal damage, and are not well tolerated by the patient even under local anesthesia. Moreover, daily maintenance of oral hygiene is difficult for patients with an arch bar. Recently, intermaxillary fixation using intraoral skeletal anchorage screws (SAS) has been introduced for the treatment of mandibular fractures. This method solves the problems above, but they have the potential for tooth damage, screw fractures and intraoperative occlusal instability. In this study, patients with mandiblular fractures were divided into three groups. Group 1 was treated by IMF using archbars(both maxilla and mandible), Group 2 was treated with SAS(maxilla) and arch-bar (mandible), Group 3 was treated with SAS(both maxilla and mandible). The aim of this study was to evaluate the influence of the different IMF methods on periodontal tissue health and intraoperative occlusal rehabilitation about each groups, and to discuss the most favorable IMF method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.3
• /
• pp.801-825
• /
• 2024

For Internet of Things, it is more preferred to have immediate access to environment information from sensor nodes (SNs) rather than from gateway nodes (GWNs). To fulfill the goal, mutual authentication scheme between user and SNs with session key (SK) negotiation is more suitable. However, this is a challenging task due to the constrained power, computation, communication and storage resources of SNs. Though lots of authentication schemes with SK negotiation have been designed to deal with it, they are still insufficiently secure and/or efficient, and some even have serious vulnerabilities. Therefore, we design an efficient secure authentication scheme with session key negotiation (eSAS2KN) for wireless sensor networks (WSNs) utilizing fuzzy extractor technique, hash function and bitwise exclusive-or lightweight operations. In the eSAS2KN, user and SNs are mutually authenticated with anonymity, and an SK is negotiated for their direct and instant communications subsequently. To prove the security of eSAS2KN, we give detailed informal security analysis, carry out logical verification by applying BAN logic, present formal security proof by employing Real-Or-Random (ROR) model, and implement formal security verification by using AVISPA tool. Finally, computation and communication costs comparison show the eSAS2kN is more efficient and secure for practical application.

• The Journal of Information Systems
• /
• v.5
• /
• pp.21-41
• /
• 1996

Linear programming has become an important tool in decision-making of modern business management. This remarkable growth can be traced to the pioneering efforts of many individuals and research organizations. The popular using of personal computers make it very easy to process those complicated linear programming models. Furthermore advanced linear programming software packages assist us to solve L.P. models without any difficult process. Even though the advanced L.P. professional packages, the needs of more detailed deterministic elements for business decisions have forced us to apply dynamic approaches for more resonable solutions. For the purpose of these problems applying to the "Mathematica" packages which is composed of mathematic tools, the simplex processes show us the flexible and dynamic decision elements included to any other professional linear programming tools. Especially we need proper dynamic variables to analyze the shadow prices step by step. And applying SAS(Statistical Analysis System) packages to the L.P. problems, it is also one of the best way to get good solution. On the way trying to the other L.P. packages which are prepared for Spreadsheets i.e., MS-Excel, Lotus-123, Quatro etc. can be applied to linear programming models. But they are not so much useful for the problems. Calculating simplex tableau is an important method to interpret L.P. format for the optimal solution. In this paper we find out that the more detailed and efficient techniques to interpret useful software of mathematica and SAS for business decision making of linear programming. So it needs to apply more dynamic technique of using of Mathematica and SAS multiple software to get more efficient deterministic factors for the sophiscated L.P. solutions.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.633-642
• /
• 2004

A self-adaptation with context-awareness is needed within network to meet costumed services according a user's changing constraints. But the existing network has many difficulty in adding new functions because of slow standardization of network and slow deployment of new services. To solve this problem, an active network can support the suitable environment to add new function such as self- adaptation. Therefore, this Paper suggests Self Adaptation Service(SAS) using agent-based active network and the constraint-based Service Creation Environment(SCE) to support self-adaptation with context-awareness. SAS provides benefits to support the context-aware service and the fast deployment of new services.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.126-134
• /
• 2018

Using aqueous solution free radical polymerization with glacial acrylic acid (GAA), maleic anhydride (MA) and sodium methallyl disulfonate (SMADS), a novel linear polycarboxylate dispersant was synthesized for ceramics. Dispersant linear structural characterization was done by FTIR, $^1H$ NMR, HPLC and GPC, and the ratio of monomers was determined using an orthogonal experiment. This research is focused on the effects of polymerization temperature, monomer mole ratios and dosage of initiator on ceramic slurry viscosity with linear polycarboxylate dispersant for ceramic dosage rate of 0.30% (based on dry slurry), all of which were investigated by single factor test. The best polymerization conditions for linear GAA-MA-SMADS are when n(AA) : n(MA) : n(SMADS) equals 3.0 : 1.0 : 0.5, the molecular weight of the polymer is 4600 daltons, the initiator sodium persulfate accounts for 7% of the total mass of polymerized monomers, the polymerization temperature is $90^{\circ}C$ and the reaction time is 2 h. The ceramic body slurry viscosity drops from $820mPa{\cdot}s$ to $46mPa{\cdot}s$ when the concentration of the polycarboxylate dispersant is 0.30%.

• Journal of Oriental Neuropsychiatry
• /
• v.19 no.2
• /
• pp.123-132
• /
• 2008

Objective: This clinical research is conducted to find out coping strategies and anxiety of patients with chronic pain, and the correlation between pain coping strategy and anxiety. Method: 50 subjects who came to the local oriental clinic answered the questionnaires about VPMI(Vanderbilt Pain Management Inventory) and SAS(The Self-rating Anxiety Scale). Then we researched the characteristics of pain coping strategies and the correlation. Results: 1. The mean scores of passive coping, active coping, and SAS are 29.62, 17.90, and 38.32 respectively. 2. In the analysis of nonparametric test, the female subjects tend to take more passive coping than the male. The older subjects tend to take less active coping than the younger. Subjects who reported more intense pain tend to take more passive coping. 3. There is significant difference between passive coping and anxiety. Conclusion: Pain coping strategies are related with age, sex, intensity of pain, and anxiety. The therapeutic intervention of decreasing passive coping and increasing active coping may be useful to manage the chronic pain. Further study is needed to find out more adequate inquiries of active coping.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1430-1434
• /
• 2009

The present study used the liquid extraction pretreatment method and developed a liquid chromatographyultraviolet detector (LC-UV) for the simultaneous determination of 14 sulfonamides (SAs) residues in porcine and chicken muscle. Linearity within a range of $50-150\;{\mu}g/kg$ was obtained with the correlation coefficient ($r^2$) of 0.9673-0.9997. The mean recovery of SAs was 55.9-109.7% (relative standard deviations; RSDs 1.7-17.3%) in porcine muscle and 52.8-112.4% (RSDs 2.3-16.9%) in chicken muscle. The limits of detection (LODs) and limits of quantification (LOQs) were 2-32 and $7-96\;{\mu}g/kg$ in porcine muscle, and 4-32 and $13-97\;{\mu}g/kg$ in chicken muscle, respectively. These values were lower than the maximum residue limits (MRLs) established by the European Union. The sum of all SAs residues present should be less than $100\;{\mu}g/kg$.

• Journal of Life Science
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

This study was conducted to investigate the effect of simulated acid solution(SAS) on acid buffering capacity, chlorophyll content and butrient leacking in 4 herb species(Petunia hybrida Vilm, Gomphrena globosa L. Celosia cristat L. Salvia officinallis L) . The acid buffering capacity in the leves was increased in the treatment of pH 3.0 in Celosia L., whereas it was increased at pH 4.0 in Petunia Petunia hybrida Vilm. and Gomprean globosa L.. But, the acid buffering capacity of the leaves did not work at ph 2.0 treatment in 4 herb species. With decreasing pH level, the chlorophyll content of Petunia hybrida Vilm. and Gomphrena globosa L. Was markedly decreased than that of Gelosia cristata L. and Savia officinalis L. As the pH levels decreased from 5.6 to 2.0 the nutrient leaching from leaves was significantly increased in 4 herb species. In pH 4.0 and 5.6, the concentrations of nutrient leaching from leaves were higher in Perunia hybrida Vilm. and Gomphrean globosa L. than Gelosia cristata L. and Salvia officinalis L., Based on the results, there was a great differences in response to SAS among the 4 herb species. Im general, Gelosia cristata L. and Salvia officinalis L. represented a higher tolerance to SAS Petunia hybrida Vilm, and Gomphrena globosa L..

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.3930-3943
• /
• 2021

To improve the capability of the SAS4A code, which simulates the initiating phase of core disruptive accidents for MOX-fueled Sodium-cooled Fast Reactors (SFRs), the authors have investigated in detail the physical phenomena under unprotected loss-of-flow (ULOF) conditions in a previous paper (Kawada and Suzuki, 2020) [1]. As the conclusion of the last article, fuel stub motion, in which the residual fuel pellets would move toward the core central region after fuel pin disruption, was identified as one of the key phenomena to be appropriately simulated for the initiating phase of ULOF. In the present paper, based on the analysis of the experimental data, the behaviors related to the stub motion were evaluated and quantified by the author from scratch. A simple model describing fuel stub motion, which was not modeled in the previous SAS4A code, was newly proposed. The applicability of the proposed model was validated through a series of analyses for the CABRI experiments, by which the stub motion would be represented with reasonable conservativeness for the reactivity evaluation of disrupted core.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.457-463
• /
• 2013

The removal of sulfonamide antibiotics (SAs) by activated carbon was investigated by using granular activated carbon (GAC) tests and density functional theory (DFT) simulations. The GAC absorption tests show the removal efficiency of 68.4~90.7% and 99.0~99.9% in 1 and 24 hours, respectively. In both GAC tests, the removal efficiency of sulfamethazine (SMZ) was the highest followed by those of sulfathiazole (STZ) and sulfamethoxazole (SMTZ): SMZ > STZ > SMTZ. In DFT adsorption simulations, we found that the 4-aminobenzenesulfonamide parts of SMZ and STZ and the 3-methyl-1,2-oxazol-5-amine part of SMTZ are preferentially adsorbed on the edges of graphene model, provided that the adsorbates keep their structures without dissociation upon adsorption process. The adsorption energies of SMZ, STZ, and SMTZ are -4.91, -4.64, and -4.62 eV, respectively. This adsorption strength (SMZ > STZ > STMZ) agrees with the trend of the removal efficiency of SAs by GAC. In addition, dissociative adsorption configurations of SAs are discussed.