• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.155-163
• /
• 2002

In this paper, we propose SAR reduction methods based on power conservation relation, After defining SRF(SAR Reduction Factor) for a more quantitative discussion of effective SAR reduction methods, many kinds of simulation have been performed. We compare the SAR by a flip type handset with that of folder type one. It is found that in a typical position of handsets over a human head, the SAR when using the folder type is about 30 % smaller than that when using the flip type. The effects of ferrite material when using flip type handset are shown to be not considerable when using a folder type.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.109-116
• /
• 2013

To extract the 3D geometric information from SAR(Synthetic Aperture Radar) images, two different techniques, interferometric SAR and radargrammetry, have been widely used. InSAR is most widely used for the generation of precise DEM(Digital Elevation Model) until now. But, Interferometric SAR requires severe temporal correlation over areas covered with vegetation and high relief areas. Because radargrammetry is less sensible to temporal correlation, it can provide better results than interferometric SAR in certain, especially X-band SAR. In this paper, we assess the properties of DEMs generated by radargrammetry using stereo C-band RADARSAT-1 images and X-band TerraSAR-X images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.221-227
• /
• 2006

The SAR evaluation system with 9 stationary probes inserted into the object to be surveyed can calculate area SAR value based on the 9 measured electric field data. The results can be acquired in a few seconds by converting obtained area SAR to the volume SAR. The system can be very useful tool in the stages of handset development for mobile communication as well as in the handset production line because of its rapid SAR measurement ability. The validity of the measurement system is checked by showing that the measured SAR values agree well with reference SAR values suggested in the reference documents.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.483-491
• /
• 2005

SAR signal processing technique has been considered a crucial technical part in order to generate an image from radar signal data and ADD (Agency for Defense Development) has focused on this area for years to develope our own SAR Processor for various SAR systems (Radarsat, ERS, KOMSAR). In this paper, we investigated major techniques related to generation of SAR images and developed ASPR (ADD SAR Processor for Radarsat) practically using the commercial Radarsat-1 radar signal data (RAW). We demonstrated the performance of the ASPR in comparison with the image generated by MDA and Vexcel's SAR Processor (FOCUS).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.195-207
• /
• 2017

Recently, the SAR-GMTI mode is becoming increasingly essential in airborne radar systems. While SAR requires wideband waveforms for high resolution imaging, GMTI requires narrowband waveforms for doppler processing, which makes general LFM waveforms difficult to use for SAR-GMTI. This paper analyses the FJB(Frequency Jump Burst) waveform, which is studied for the SAR-GMTI waveform, and presents the method for the pulse compression and SAR image formation using FJB waveforms. Simulation results show that there is little difference in performances between the FJB waveform and the LFM waveform.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.188-194
• /
• 2010

In this paper, the typical Synthetic Aperture Radar (SAR) image quality parameters and analysis method are defined, and the SAR image analysis tool is presented for SAR image evaluation. The structure of the developed SAR image analysis tool consists of four key modules; point target analysis (PTA) module, distributed target analysis (DTA) module, ambiguity analysis (AMA) module, and NESZ analysis (NESZA) module. The developed tool is able to extract the various SAR system parameters from standard SAR product format files. Based on these extracted system parameters, typical SAR image quality parameters are derived from SAR image data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.147-156
• /
• 2005

SAR interferometry (InSAR) is a technique to generate 3-Dimentional spatial information using complex data pairs observed by antennas at different locations. In case of the Two-pass differential SAR inteferometry (DInSAR), the topographic phase signature can be separated from the contribution of surface deformation in the interferometric phase. In this study, InSAR and DInSAR were implemented with ERS- l/2 tandem pair to produce DEM. The accuracy of the Resulting DEMs was analyzed.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.25-32
• /
• 2009

In this paper, the technical trends of the synthetic aperture radar (SAR) were studied by investigating the journals and conference associated with the advanced technology of SAR. SAR has been first demonstrated in 1950. The main objective of SAR development is to overcome the limitations of real aperture radars. From 1950, many new concepts and technologies for SAR system is suggested and realized by many international researchers and engineers. New concepts for future SAR systems represented in the recent conference have been rearranged and analyzed.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.134-137
• /
• 2007

GB-SAR (Ground-Based Synthetic Aperture Radar) 시스템은 지상에서 안테나의 정밀한 일축 제어를 통해 합성 구경(synthetic aperture) 효과를 얻어 높은 해상도의 영상을 얻는 레이더 스캐너(Radar Scanner) 의 일종이다. GB-SAR는 장기간에 걸쳐 안정 적으로 마이크로파 영상 및 위상을 얻을 수 있기 때문에，SAR간섭기법(interferometry)을 통하여 비교적 안정된 산란체의 시간에 따른 변위를 cm 혹은 mm 정밀도로 정량적으로 얻을 수 있으며, 또한 긴밀도(coherence)를 통해 산란체의 안정성을 정성적으로 추출해 낼 수 있다. 이 논문에서는 GB-SAR 시스템의 개발을 소개하고 여러 가지 영상 획득 모드를 통하여 얻어진 SAR 영상， DInSAR, Cross-Track InSAR, ${\triangle}k-InSAR$, PSInSAR, 및 SAR Polarimetry 등 GB-SAR 시스템의 다양한 응용 가능성을 간략하게 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.148-148
• /
• 2017

본 연구에서는 합성개구레이더(Synthetic Aperture Radar, SAR) 인공위성 영상을 활용한 풍수해 피해지역 감지 기법을 제안하고자 한다. SAR 인공위성 자료를 분석하여 풍수해 피해 중 지반의 변화량 및 변화양상 감지를 분석하였다. 연구지역은 울릉도 전역이며, 2016년 8월 30일 제 10호 태풍 라이언록에 의한 피해를 분석하였다. SAR Interferometry(InSAR) 기법을 적용하여 홍수 전, 후의 지반 변화량을 분석하였다. 분석결과의 정확도를 파악하기 위해 분석결과를 실제 피해사례 및 피해 사진 등과 비교, 분석하여 검증을 실시하였다. 검증결과, 정성적인 지반변화 및 변화양상은 판별되었으나, 정량적인 지반변화량 파악은 어려운 것으로 나타났다. 현재 국내지역에 대해 InSAR 기법을 적용하여 홍수 전, 후의 지반변화 감지를 적용해본 사례가 많지 않은 실정이며, 본 연구는 국내지역에 대해 InSAR 기법을 적용하여 풍수해 피해감지를 하였다는 의미가 있다.