• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.256-257
• /
• 2005

We fabricated self-assembled monolayers(SAMs) onto quartz crystal microbalance(QCM) using viologen, which has been widely used as electron acceptor and electron transfer mediator. The viologen derivative exist in three redox states, namely. These redox reactions are highly reversible and can be cycled many times without significant side reactions, respectively. We studied the characteristics of charge transfer using different electrolyte solutions by electrochemical quartz crystal microbalance (EQCM). From the data, the redox peak currents were nearly equal charges during redox reaction and existed to an excellent linear interrelation between the scan rates and first redox peak currents. The redox reactions of viologen were highly reversible and the EQCM has been employed to monitor the electrochemically induced adsorption of SAMs during the redox reactions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.339-339
• /
• 2011

기존의 광학리소그래피방법으로는 나노크기의 패턴을 형성하는데에 있어서 많은 제약이 있으며, 사실상 수십나노크기의 패턴을 형성하는데에는 전자빔리소그래피등 새로운 패턴형성 방법이 요구되고 있다. 블록 공중합체를 이용한 나노 패턴은 서로 다른 화학적 구조를 가지는 고분자들이 공유결합으로 연결되어 있는 분자구조를 이용하여, 하나의 분자 내에 서로 다른 블록들이 상분리를 일으키려는 것과 동시에 이들의 공유결합으로 인해 그 정도가 제한되는 것을 이용하여 라멜라, 실린더, 구 등의 주기적으로 배열된 형태의 구조물을 형성하는 패터닝 기술이다. 블록 공중합체를 이용한 나노크기의 패턴 형성은 열역학적으로 안정적인 구조이며, 대면적으로 구현 할 수 있어서 차세대 소자제작을 위한 제작기술로 많은 관심을 가지고 있다. 하지만 블록공중합체를 이용한 나노패턴 기술은 선행적으로 나노구조체를 결함이 없고, 원하는 형태로 제작 할 수 있는 공정의 확립이 필요하다. 따라서 본 연구에서는, 이러한 블록 공중합체을 이용한 나노패턴을 제조하는 공정에서, 폴리스틸렌과 실리콘 산화물 박막과의 표면반응을 막기 위한 Self-Assembly Monolayers (SAMs) 처리 공정이 패턴 형성에 미치는 영향을 알아보기 위하여 MPTS의 농도 및 처리시간을 변화시켰다. 나노패턴을 분석, 확인하기 위하여 Atomic Force Microscopic (AFM)과 Field Emission Scanning Electron Microscope (FESEM)을 이용하였다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1349-1352
• /
• 2008

We report a novel patterning method for a homo-polymeric poly(3-hexylthiophene) (P3HT) nanofilm particularly capable of strong adhesion to a $SiO_2$ surface. An oxidized silicon wafer substrate was micro-contact printed with n-octadecyltrichlorosilane (OTS) monolayer, and subsequently its negative pattern was selfassembled with three different amino-functionalized alkylsilanes, (3-aminopropyl)trimethoxysilane (APS), N- (2-aminoethyl)-3-aminopropyltrimethoxy silane (EDAS), and (3-trimethoxysilylpropyl) diethylenetriamine (DETAS). Then, P3HT nanofilms were selectively grown on the aminosilane pre-patterned areas via the vapor phase polymerization method. To evaluate the adhesion, patterning, and the film itself, the PEDOT nanofilms and SAMs were investigated with a $Scotch^{(R)}$ tape test, contact angle analyzer, ATR-FT-IR, and optical and atomic force microscopes. The evaluation showed that the newly developed all bottom-up process can offer a simple and inexpensive patterning method for P3HT nanofilms robustly adhered to an oxidized Si wafer surface by the mediation of $FeCl_3$ and amino-functionalized alkylsilane SAMs.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.281-285
• /
• 2011

We investigated the effects of tunneling current on scanning tunneling microscopy (STM) images of 1-octanethiol (OT) and 1-decanethiol (DT) self-assembled monolayers (SAMs). At a low tunneling current, the domain boundaries and ordered alkanethiol molecules were clearly resolved. As the tunneling current was increased at a constant bias voltage, however, the STM images showed disordered structures of the OT and DT SAMs. As the tunneling current was reduced back to low values, the ordered structures of the alkanethiol molecules reappeared. The reversibility of the process suggests that the sulfur head groups did not rearrange under any of the tunneling current conditions. On the basis of our observations, which are inconsistent with the standard model for STM imaging of molecules on metal surfaces, we consider the STM imaging mechanism in terms of a two-region tunneling junction model.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.38-44
• /
• 2004

Searching for systems of self-assembled monolayers (SAMs) that can be used as templates for chemical lithography, we found that nitro groups on aromatic SAMs are selectively converted on Ag to amino groups by irradiation with a visible laser. 4-nitrobenzenethiol on Ag was thus converted to 4-aminobenzenethiol by irradiating it with an $Ar^+$ laser. This was evident from surface-enhanced Raman scattering (SERS) as well as from a coupling reaction forming amide bonds. The surface-induced photoreaction allowed us to prepare patterned binary monolayers on Ag that showed different chemical reactivities. Using the binary monolayers as a lithographic template, we induced site-specific chemical reactions, such as the selective growth of biominerals on either the nitro- or amine-terminated regions by adjusting the crystal-growth conditions. We also demonstrated that patterned, amine-terminated monolayers can be fabricated even on gold by using silver nanoparticles as photoreducing catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2574-2576
• /
• 2009

In this work, we describe a new sensor that specifically responds to biothiols, i.e., glutathione (GSH), in solution. An electrochemical transducing strategy was utilized and cyclic voltammetry (CV) was employed to monitor the presence of GSH in real time. Our approach harnessed self-assembled monolayers (SAMs) on gold consisting of an alkanethiolate which was terminated by electroactive quininoid moiety. Prior to thiol molecule treatment, the characterisitc reversible redox peaks of the electroactive quininoid group was observed, while the reduction peak was dramatically shifted upon a treatment of GSH. This sensor showed the capability to detect the GSH in solution in the range of 1 mM $\sim$ 100 aM. We believe that this strategy will provide an important tool for accurate, sensitive, rapid, and low-cost determination of GSH.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.111-114
• /
• 2005

Organic monolayers were fabricated onto Au(l l l) substrate by self-assembly method using dipyridinium. Also, organic single molecule in the organic monolayers was selected to measure the current-voltage (I-V) curves by using the ultrahigh vacuum scanning tunneling microscopy (UHV-STM). The organic molecule used in the experiment was dipyridinium dithioacetate, which contains thiol functional group and can be self-assembled easily onto Au(l l l) substrate. The concentration of dipyridinium dithioacetate for self-assembly procedure was I [mM/L]. To confirm the formation of self-assembled mono layers (SAMs), the differences of thickness of the self-assembled organic monolayers were observed by using an ellipsometer, and the morphology and I-V curves of the SAMs were investigated by using UHV-STM. The applied voltages were from -2 [V] to +2 [V], temperature was 300 [K]. The vacuum for measuring current of the organic single molecule was 6 $\times$ 10$^{-8}$ [Torr]. As a result, properties of the negative differential resistance (NDR) in constant voltage were found.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.115-118
• /
• 2005

Currently, molecular devices are reported utilizing active self-assembled monolayers (SAMs) containing the nitro group as the active component, which has active redox centers [1]. SAMs are ordered molecular structures formed by the adsorption of an active surfactant on a solid surface. The molecules will be spontaneously oriented toward the substrate surface and form an energetically favorable ordered layer. During this process, the surface-active head group of the molecule chemically reacts with and chemisorbs onto the substrate In this paper, the electrical properties of the 4'4- di(ethynylphenyl)-2'-nitro-1-benzenethiolate was confirmed. This material is well known as a conducting molecule having possible application to molecular level negative differential resistance (NDR) device. To deposit the self-assembly monolayers onto the gold electrode, the prefabricated Au(1 l l) substrates were immersed into 0.5[mM/l] self-assembly molecule in THF solution. Then, the electrical properties and surface morphologies of 4' 4-di(ethynylphenyl)-2' -nitro-1-benzenethiolate were measured by using the ultra-high vacuum scanning tunneling microscopy (UHV-STM).

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1305-1306
• /
• 2006

A monolayer assembly of anthracene-viologen linked thiol ($AMVC_{8}SH$) was fabricated on a gold electrode by self-assembly method. Structural property of the self-assembled monolayers (SAMs) was carried out by optical and electrochemical method. Firstly, we investigated PL spectrum and UV/visible absorption for the optical properties in solution state. Secondly, we determined the characteristics of charge transfer in different electrolyte solutions by electrochemical quartz crystal microbalance (EQCM). From the data, the PL spectrum and UV/visible absorption were observed and the well-defined shape peaks were nearly equal charges during redox reactions and existed to an excellent linear relationship between the scan rates and existed to currents. The mass change was determined during redox reaction. The mass change behavior of SAMs was not only governed by the mobility of the ion in the viologen but the valence of the ion in the electrolyte solution.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1390-1391
• /
• 2006

본 연구에서는 전도성 분자로 잘 알려진 4,4-Di(ethynyl phenyl) -2'-nitro-1-(thioacetyl)-benzene(nitro - benzene) 분자를 Au (111) 표면에 자기조립하고, ultra high vacuum scanning tunneling microscopy (UHV-STM)을 사용하여 STM tip과 sample 사이의 거리를 변화시키면서 전기전도 특성을 측정하였다. Au 기판제작은 연증착시스템 (Thermal Evaporation System)으로 제작하였으며, piranha 용액 ($H_{2}SO_{4}\;:\;H_{2}O_{2}$=3:1)을 사용하여 전치리한 후, 자기조립 단분자막 (SAMs)을 형성하였다. 먼저 1-octanethiol을 ethanol solution용액 1 mM/L 농도에서 24시간 동안 자기조립한 후에, ethanol를 solution 용액으로 이용하여 nitro-benzene를 0.1 nM/L 농도로 암실에서 30분간 자기조립 하였다. 자기조림 후 solution을 제거하기 위해 에탄올로 세척하여 $N_2$로 건조시켰다. 이 조건하에서 UHV-STM을 사용하여 nitro-benzene SAMs의 실시간 모폴로지의 변화에 따른 nitro-benzene의 전기전도 특성을 STM tip - SAMs - Au 기판의 수직구조로 STM tip과 nitro-benzene의 거리를 변화시키면서, tunneling current을 조사하였다. 측정 결과 Z-position 변화에 대한 tunneling current와 resistance의 변화를 확인할 수 있었다.