• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.454-462
• /
• 2011

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C-methylcalix[4]resorcinarene (CMCR) has been conducted. CMCR was produced by one step synthesis from resorcinol, acetaldehyde, and HCl. Most parameters in batch system confirm that CMCR is a good adsorbent for Pb(II) and Cr(III). Cr(III) uptake was bigger than that of Pb(II), but Cr(III) adsorption rate was slower than Pb(II). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch followed pseudo $2^{nd}$ order kinetics model, but the kinetic of Pb(II) adsorption in fixed bed column system followed first order model. Desorption studies to recover the adsorbed Pb(II) was performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.1-10
• /
• 1988

Fraser, Dombrowski, Tanasawa 그리고 Momono 등(等)이 분구(噴口)에 대(對)한 중자도구(中子導溝) 단면적(斷面積)의 비(比)에 기초을 두고 있는 Nozzle Parameter가 클수록 유량계수(流量係數)는 증가(增加)한다고 보고(報告)하였다. 그러나 노즐의 구조(構造)는 중자도구(中子導溝) 및 와실(渦室)의 형상(形狀)에 따라서 특성(特性)을 가지고 있고 구조(構造)의 특성(特性)은 유량계수(流量係數), 분무각(噴霧角) 및 살포도(撒布度)에 지대한 영향을 미친다. 노즐구조(構造)에 관(關)한 이론분석(理論分析)의 결과(結果)는 다음과 같다. 중자도구변(中子導溝邊)(d), 중자(中子)두께(t) 및 중자도구각(中子導溝角)(${\theta}$) 등(等)의 관계(關係)가 와실유선각(渦室流線角)(${\theta}_c$)에 미치는 영향은 $$tan({\theta}_c)=\frac{t{\cdot}sin^2{\theta}}{d-t{\cdot}sin{\theta}{\cdot}(1-cos{\theta})}$$ 또한 와실유선각(渦室流線角)(${\theta}_c$)이 중자도구각(中子導溝角)(${\theta}$)과 일치(一致)하는 관계(關係)는 $\frac{d}{t}=sin{\theta}$이다. 와실유선각(渦室流線角)과 와실형상(渦室形狀)과의 관계(關係)는 $$tan({\theta}_c){\qeq_-}\frac{r_c-r_g}{L_c}$$ 이며 와실유선각(渦室流線角)은 와실유선회전반경(渦室流線回轉半徑)과 와실(渦室)길이의 비(比)에 의(依)하여 변화(變化)함을 시사(示唆)한다. Swirl core가 Swirl plate보다는 생산비(生産費)의 고려없이 압력손실(壓力損失) 및 마찰손실 면(面)에서 더욱 합리적(合理的)으로 고려(考慮)된다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1186-1195
• /
• 1993

The Japanese type combine harvester has adopted rubber crawlers for the driving mechanism from first production . However, combine harvesters with movable track rollers in the rubber crawler system have been adopted recently for the purpose of stability at the time of climbing over the footpaths between rice fields, as the results of the machines becoming large. However, the dynamic characteristics of movable track rollers have not been clarified. For this reason, the design of movable track rollers depends on trial and errors. It is known that vibration characteristics of the vehicle with movable track rollers are different from the vibration characteristics of the vehicles with fixed track rollers even though the track roller arrangements are the same. Therefore, the theoretical analyses of movable track rollers must be hurried in order to formulate a reasonable track roller arrangement design. the authors have studied the vibration characteristics of the rubber crawler ve icle with fixed track rollers. in this study, the dynamic model of the vehicle with movable track roller sis compared with the dynamic model of the vehicle with fixed track rollers. Next, motions are simulated to analyze the movable track rollers by expanding the motion equation which were constructed for the dynamic model of the fixed track rollers.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.62-68
• /
• 2015

Many severe earthquakes have occurred along the main fault lines in the world. In recent years, there has been a high incidence of small- and large-scale earthquakes in our country. These occurrences of earthquakes have become increasingly serious, owing to a degrading earth environment. An earthquake, in general, causes far more serious damages like disruptions in electricity or gas facilities, and fire disasters from its annexed effects than by its vibrations or the shock itself. In this paper, we present a countermeasure and its necessity in safeguarding against fire disasters in regional heritage villages such as "Asan Oeam," "Jeonju Hanok," and "Andong Hahoe." A more systematic and effective strategy for prevention systems against severe fire disasters is proposed after performing various related investigations and analyses of existing domestic and international systems. We investigated the existing fire security systems and their historical records with the tendency of earthquake occurrences in these three folk villages. In this proposal, we present a strategic approach for safeguarding against fire damages in our regional heritage villages derived from ICT (information communication technology)-based DPD (disaster prevention design), after examining the laws and regulations of fire-prevention strategies in Japan, America, and Europe.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.961-966
• /
• 2009

2008 Korea-Japan Cartoon Festival is a cultural enterprise, sponsored by 8 cities of Korea and Japan. 8 cities include Pusan, Choen Nam Province, Kyung Nam Province, Cheju, Fukuoka, Saga, Nagasaki, and Yamaguchi. It was held under the sponsorship of Fukuoka, Japan, in 2007. In 2008, it was held in Pusan under the sponsorship of Korea Character Designers' Association and Pusan Becksko. Even though local autonomous entities, recently, sponsor various Festivals, 2008 Korea-Japan Cartoon Festival has so unique characteristics that it is appropriate for paper. Unique characteristics of this Festival include that it is held only two years and it is for amity of young people of East Asia. In 2008 Korea-Japan Cartoon Festival, there were cartoon contest, exhibition, seminar, and experience event. It would be the basic ideas for industries of characters, animations and games, and would broaden cultural interchange between Korea and Japan.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.224-224
• /
• 2017

In plants, cysteine(Cys) is decisive for protein and glutathione that acts as an indispensable sulfur grantor for methionine and many other sulfur containing secondary products. Cys formation is involved in the consecutive two reactions using two enzymes-serine acetyl transferase (SAT) and O-acetylserine (thiol)lyase (OASTL) and appeared in plant cytosol, chloroplast and mitochondria. OASTL is able to produce mimosine with 3-hydroxy-4-pyridone (3H4P) in lieu of $H_2S$ for Cys. In this report, we describe the first time cloning, purification and characterization of cytosolic(cy)OASTL from M. pudica and its expression in Escherichia coli and try to find out the cross link between this OASTL and the mimosine formation and to elucidate the metabolic role of cy-OASTL in M. pudica. The purified recombinant protein was 34.7 KDa. The optimum reaction pH and temperature was 6.5 and $50^{\circ}C$, respectively. The Michaelis constant (Km) and the Vmax value of the enzyme was $252{\pm}25{\mu}M$ and $57{\pm}3{\mu}M\;cysteine\;min^{-1}\;{\mu}g\;protein^{-1}$ for sulfide and $159{\pm}21{\mu}M$ and $58{\pm}2.4{\mu}M\;cysteine\;min^{-1}\;{\mu}g\;protein^{-1}$ for OAS subsequently. After cleaving the His-tag, we tried to observe cy-OASTL to form mimosine with appropriate substrate but it was not successful. It may be concluded that cy-OASTL of the present study is only Cys specific, not mimosine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.407-412
• /
• 2010

The objective of this study is the estimation of the mechanical properties of HIP-treated MMCs by an optimized manufacturing process. The Ti-MMCs were fabricated by HIP and rotary swaging (RS) for secondary processing. The Ti-MMCs with different tungsten fiber contents of 0, 6, 9, and 12 vol% were subjected to tensile tests, fatigue tests, and hardness tests. The results show that the hardness values of Ti-MMCs increased with the increasing volume percent of tungsten fibers, the tensile strength increased by approximately 50% (specific strength: 38%) at the 9 vol%. The value of tungsten-fiber orientation F affects the tensile strength. The fatigue strengths of the Ti-MMCs did not improve. HIP is a useful manufacturing method for Ti-MMCs and RS is an important process for improving fiber orientation during secondary processing.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.2
• /
• pp.203-225
• /
• 2015

This study was conducted in Tateyama, Japan with on-site observation conducted by Professor Aizawa, who organized this locality movement. This research was focused on listening to people's explanations, observations and studying the related documentation. First of all, the locality of Tateyama City was formed by utilizing the historic records of the area. Through Namo Amitabha which was carved on the four-sided stone pagoda, the city formed the locality as the peaceful city. "The gift of the Sea" painted by Shigeru Aoki in this city contributed to the identity of this locality known as the 'city of art which the painter loved'. The reconstruction of localities through the documentation of the relics are as follows. Satomi Castle, which was discovered to be the setting of the famous fictional saga Satomi and the Eight "Dogs". The excavation and research of the ruins of forgotten World War II, is another example of reconstruction at this locality. This locality is seen as 'the city of peace' and was reconstructed through a positive and future oriented attitude. It is noticeable that the locality of Tateyama city was newly formed or reconstructed using local records and documentation relics in the area.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.287-294
• /
• 2000

Calculation of the flexural rigidity value (EI) is indispensable for prescription of deflection characteristics of crop stalks in harvesting□Conventionally□EI has been determined by either average EI of the whole stalk or average EI of each stems divided into node through the calculation method of cantilever with homogeneous section□However□deflection characteristics of crop stalks caused by mechanical operation such as combine harvester were not exactly presumed by these conventional EI through the experiment by authors. Further, actual EI of a stalk changes in company with a change of moisture contents as time passes during the experiment. Finally, efficient calculation method for determining EI is needed in order to improve these problems. In this study, mechanical model based on actual structure of the crop stalk with variety sectional area was proposed. This mechanical model is calculated by the theory of cantilever with continuous stages. Therefore, improvement of both calculating accuracy on EI and efficiency of measuring system was tried. At first, this calculation method was applied to piano wire of which EI was recognized in advance. As a result, EI calculated from this new method coincided approximately with piano wire's EI. Next, applying to crop stalks as same as piano wire, relationship between loads acting on crop stalks and deflection values calculated by EI using this new calculation method was exactly presumed in comparison with conventional method. Further, measuring time of deflection test was greatly reduced. Finally, new calculation method of EI will be available for estimating mechanical characteristics of so many kinds of crop stalks in harvesting operation. Further, in this study, new deflection test using image-processing apparatus by computer will be introduced.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.124-131
• /
• 2000

In this study, the NEURAL NETWORK (hereinafter referred to as NN) was applied to control of the nonlinear factors for turning movement of the crawler vehicle and experiment was carried out using a small model of crawler vehicle in order to inspect an application of NN. Furthermore, CHAOS NEURAL NETWORK (hereinafter referred to as CNN) was also applied to this control so as to compare with conventional NN. CNN is especially effective for plane in many variables with local minimum which conventional NN is apt to fall into, and it is relatively useful to nonlinear factors. Experiment of turning on the slope of crawler vehicle was performed in order to estimate an adaptability of nonlinear problems by NN and CNN. The inclination angles of the road surface which the vehicles travel on, were respectively 4deg, 8deg, 12deg. These field conditions were selected by the object for changing nonlinear magnitude in turning phenomenon of vehicle. Learning of NN and CNN was carried out by referring to positioning data obtained from measurement at every 15deg in turning. After learning, the sampling data at every 15deg were interpolated based on the constructed learning system of NN and CNN. Learning and simulation programs of NN and CNN were made by C language ("Association of research for algorithm of calculating machine (1992)"). As a result, conventional NN and CNN were available for interpolation of sampling data. Moreover, when nonlinear intensity is not so large under the field condition of small slope, interpolation performance of CNN was a little not so better than NN. However, when nonlinear intensity is large under the field condition of large slope, interpolation performance of CNN was relatively better than NN.