• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.133-149
• /
• 2017

As cities face increasing problems such as aging, environmental pollution and growth limits, we have been trying to incorporate sustainability into urban planning and related policies. However, it is very difficult to generate a 'sustainable spatial plans' because there are trade-offs among environmental, society, and economic values. This is a kind of non-linear problem, and has limitations to be solved by existing qualitative expert knowledge. Many researches from abroad have used the meta heuristic optimization algorithms such as Genetic Algorithms(GAs), Simulated Annealing(SA), Ant Colony Optimization(ACO) and so on to synthesize competing values in spaces. GAs is the most frequently applied theory and have been known to produce 'good-enough plans' in a reasonable time. Therefore we collected the research on 'spatial optimization model based GAs' and analyzed in terms of 'study area', 'optimization objective', 'fitness function', and 'effectiveness/efficiency'. We expect the results of this study can suggest that 'what problems the spatial optimization model can be applied to' and 'linkage possibility with existing planning methodology'.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.423-426
• /
• 2013

본 연구에서는 임분 단위에서 산림의 이산화탄소 흡수 및 저장 기능을 최적화 할 수 있는 최적의 산림시업체계를 도출하고자하였고, 이를 위해 임분 생장모델과 Simulated Annealing 휴리스틱 기법을 적용하여 임분탄소 최적화 프로그램을 개발하였다. 휴리스틱 알고리즘에서 최적해를 찾기 위해 반복 실행 되는 과정에서 더 이상 최적해을 찾지 못하고 목표 값이 어떤 일정한 값(Local Optimum)에 계속 머무는 현상을 해결하기 위해 임계치를 적용하며, SA 휴리스틱 기법에서는 열균형테스트를 이용하고 있다. 개발된 프로그램을 이용하여 3가지 산림 시업 시나리오에 대한 비교 분석을 실시하기 위해 프로그램을 실행한 결과, 목재수확량의 경우 목재수확량을 최대를 목표로 한 대안이 3개 시나리오 가운데 목재수확량이 가장 높은 것으로 나타났으며, 또한 탄소저장량에서도 탄소저장량을 최적화한 대안이가 탄소저장량이 가장 높은 것으로 나타나 프로그램이 목적에 맞게 개발된 것으로 판단됐다. 또한 열균형 테스트의 온도저감율을 조정하여 프로그램을 반복실행하여 온도저감율이 프로그램 실행 시에 미치는 영향을 분석한 결과 온도저감율에 따라 출력되는 목적함수의 최적값과 프로그램 반복횟수가 영향을 받는 것으로 나타나 프로그램 실행을 최적으로 하기위해 온도 저감율의 파라미터 값을 0.1로 설정하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.3 s.42
• /
• pp.17-24
• /
• 2007

This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.101-109
• /
• 1998

In this paper, we implemented holographic optical memory systm which can store and reconstruct many images using new input and angular multiplexing method. In the new input method, phase infomation of input image is inputed in the recording material instead of brightness information. To do so, we represented the images, which captured with CCD camera or displayed on the computer monitor, on the liquid crystal television(LCTV) which removed polarizer/analyzer. Therefore, we can generate uniform input beam intensity regardless of the total brightness of input image, and apply the scheduled recording method. Also we can increase the intensity of input beam so reduce the recording time of input image. And reconstructedimage is acquired by transforming phase information into brightness information of image with analyzer. The incident angle of reference beam is acquired by Fourier transform of the binary phase hologram(BPH) which designed with SA algorithm on the LCTV. The proposed optical memory system is stable because the incident angle of the reference beam is controlled easy and electronically. We demonstreated optical experiment which store and reconstruct various type images in BaTiO$_{3}$ using proposed holographic memory system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.407-412
• /
• 2007

본 논문에서는 비선형 블라인드 채널등화기의 구현을 위하여 가우시안 가중치(gaussian weights)를 이용한 개선된 퍼지 클러스터(Modified Fuzzy C-Means with Gaussian Weights: MFCM_GW) 알고리즘을 제안한다. 제안된 알고리즘은 기존 FCM 알고리즘의 유클리디언 거리(Euclidean distance) 값 대신 Bayesian Likelihood 목적함수(fitness function)와 가우시안 가중치가 적용된 멤버쉽 매트릭스(partition matrix)를 이용하여, 비선형 채널의 출력으로 수신된 데이터들로부터 최적의 채널 출력 상태 값(optimal channel output states)들을 직접 추정한다. 이렇게 추정된 채널 출력 상태 값들로 비선형 채널의 이상적 채널 상태(desired channel states) 벡터들을 구성하고, 이를 Radial Basis Function(RBF) 등화기의 중심(center)으로 활용함으로써 송신된 데이터 심볼을 찾아낸다. 실험에서는 무작위 이진 신호에 가우시안 잡음이 추가된 데이터를 사용하여 기존의 Simplex Genetic Algorithm(GA), 하이브리드 형태의 GASA(GA merged with simulated annealing (SA)), 그리고 과거에 발표되었던 MFCM 등과 그 성능을 비교 분석하였으며, 가우시안 가중치가 적용된 MFCM_GW를 이용한 채널등화기가 상대적으로 정확도와 속도 면에서 우수함을 보였다.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.74-79
• /
• 2008

영상 융합은 센서의 자료 저장 능력과 센서에 들어오는 방사에너지 감지의 한계를 해결하고 고해상도의 멀티스펙트럴 영상을 생성할 수 있다는 측면에서 중요한 의의를 지닌다. 특히, 성분대입(component-substitution) 기반의 영상융합 기법은 대용량의 자료를 빠르게 처리할 수 있고, 융합된 영상의 분광왜곡이 적다는 장점을 지니고 있다. 본 연구에서는 최적화기법 중의 하나인 담금질 모사기법(Simulated Annealing, SA)을 이용하여 다양한 성분대입 기반 영상융합 알고리즘들을 분석 및 평가하였다. 담금질 모사기법은 원하는 목적함수가 지역적 최소값이 아닌 광역적 최소값에 수렴이 가능하도록 하는 기법으로 다양한 분야에서의 광역 최적화 기법에 사용된다. 융합 기법의 최적화된 변수를 추출하기 위하여 인위적으로 공간해상도를 낮춘 위성영상을 입력자료로, 원 멀티스펙트럴영상을 참조자료로 사용하였으며, 두 영상간의 분광유사 척도를 담금질 모사 기법의 목적 함수로 구성하였다. 이를 통해 해당 목적함수의 광역적 최소값을 추출하고, 최종적으로 해당 영상에 융합 기법 별 최적화된 변수를 결정하였다. 제안된 최적화 변수의 평가를 위하여 IKONOS 위성영상에 융합을 적용하고, 알고리즘별 분광왜곡량을 비교하였으며 이를 통하여 고해상도 위성영상에 가장 적합한 성분대입 기반 영상융합 기법 및 그에 따른 최적화 변수를 도출할 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.53-60
• /
• 1997

Nonlinear free surface flow phenomena have teen studied by several kinds of numerical methods, of which boundary element method has been known as most promising one. There, however, remain many difficulties to be solved in the numerical procedures by boundary element analysis. In this paper, an efficient calculation of elemental integrals and iterative solution algorithm for the resulting system of equations were thoroughly investigated in order to enhance the procedure of the boundary element analysis. Advantages of the herein developed boundary element analysis code are demonstrated in terms of accuracy and convergence for typical boundary-value problems with free surface.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1451-1456
• /
• 2013

This paper propose a method for fast convergence technique in frequency domain independent component analysis (FDICA) using eigenanalysis. It important, such as SONAR system, to eliminate the interference sources through fast algorithm. Through eigenanalysing a two-by-two delayed mixture case, information of delay can be used for initial weighting parameters. Simulations show the improved performances in convergence speed and noise rejection rate. The proposed method can present close weights for optimal convergence, noise can be diminished drastically about 3 times epoch, and get the better resultss with 1~3dB than the conventional method.

• Journal of Korea Multimedia Society
• /
• v.7 no.6
• /
• pp.841-850
• /
• 2004

This paper proposes a GA and GDM-based method for removing unnecessary rules and generating relevant rules from the fuzzy rules corresponding to several fuzzy partitions. The aim of proposed method is to find a minimum set of fuzzy rules that can correctly classify all the training patterns. When the fine fuzzy partition is used with conventional methods, the number of fuzzy rules has been enormous and the performance of fuzzy inference system became low. This paper presents the application of GA as a means of finding optimal solutions over fuzzy partitions. In each rule, the antecedent part is made up the membership functions of a fuzzy set, and the consequent part is made up of a real number. The membership functions and the number of fuzzy inference rules are tuned by means of the GA, while the real numbers in the consequent parts of the rules are tuned by means of the gradient descent method. It is shown that the proposed method has improved than the performance of conventional method in formulating and solving a combinatorial optimization problem that has two objectives: to maximize the number of correctly classified patterns and to minimize the number of fuzzy rules.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.874-890
• /
• 2021

With the widespread deployment of the fifth-generation (5G) communication networks, various real-time applications are rapidly increasing and generating massive traffic on backhaul network environments. In this scenario, network congestion will occur when the communication and computation resources exceed the maximum available capacity, which severely degrades the network performance. To alleviate this problem, this paper proposed an intelligent resource allocation (IRA) to integrate with the extant resource adjustment (ERA) approach mainly based on the convergence of support vector machine (SVM) algorithm, software-defined networking (SDN), and mobile edge computing (MEC) paradigms. The proposed scheme acquires predictable schedules to adapt the downlink (DL) transmission towards off-peak hour intervals as a predominant priority. Accordingly, the peak hour bandwidth resources for serving real-time uplink (UL) transmission enlarge its capacity for a variety of mission-critical applications. Furthermore, to advance and boost gateway computation resources, MEC servers are implemented and integrated with the proposed scheme in this study. In the conclusive simulation results, the performance evaluation analyzes and compares the proposed scheme with the conventional approach over a variety of QoS metrics including network delay, jitter, packet drop ratio, packet delivery ratio, and throughput.