• Journal of Life Science
• /
• v.8 no.6
• /
• pp.695-701
• /
• 1998

This study was carried out to investigate levels of the components of microsomal mixed function oxidase (MFO) system and activities of the hepatic microsomal cytochrome P45O (P45O)-dependent monooxygenases of grass snake (Natrix tigrina Lateralis) and to compare with those of rat. The levels of P45O and cytochrome b$_{5}$, (b$_{5}$) of snake were much lower than those in rat. NADPH-cytochrome c reductase activity in the snake was also only 40% of that in the rat. Activities of 7-ethoxycoumarin 0-deethylase (ECOD) and benzphetamine N-demethylase (BPDM) of snake hepatic microsomes, when compared with those of rat, were markedly low. But, aryl hydrocarbon hydroxylase (AHH) and testosterone hydroxylase (TSH) activities were nearly the same or higher than those of the rat. Of the P45O-dependent TSHs measured, 7$\alpha$-hydroxylase activity was the highest in snake, whereas, 6$\beta$-hydroxylase activity was the highest in rat. However, stereoselectivity of the enzyme from the snake to C2 and C6 positions of testoste-rone was the same as rat. The result of radioimmunoassay (RIA) for the identification of five P45O isozymes with MAbs shows that relatively high content of ethanol-inducible P45O isozyme, CYP2El, exists in the rat, whereas MC-inducible P45O isozyme, CYP2A1/1A2, does in the snake. From the analyses of SDS-PAGE and RIA of partially pu-rified P45O, we suggest the possibility of the presence of a certain P45O isozyme(s) in hepatic microsomes of snake different from those of rat.

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.45-52
• /
• 1998

In this paper, we establish the exponential formula for C-semigroup. If A is the generator of a C-semigroup S(t), then S(t) can be represented by exp(tA) in some sense.

• Journal of Nutrition and Health
• /
• v.17 no.2
• /
• pp.126-136
• /
• 1984

The long-term effects of vegetable and animal high fat diet on the lipid metabolism were investigated in male weaning rats. The rats were fed one of four semipurified diet ad libitum : control diet supplied 12% of calories as fat(control group), low fat diet supplied 3% of calories as fat (3% F group), 45% corn oil diet supplied 45% calories from corn oil (45% C group) and 45% butte. fat diet supplied 45% calories from butter fat (45 % B group). Incorporation of $acetate-1-^{14}C$ into lipid of liver, serum and adipose tissue as well as exhalation of $^{14}CO_{2}$ from $acetate-1-^{14}C$ were observed in rats fed for 4,8 and 12 weeks. The weigh of epididymal adipose tissue of rats, fed 45% corn oil and 45% butter fat . from 4 weeks to 8 weeks were higher, but not different at 12 weeks, compared with those of control group. The weight of abdominal adipose tissue appeared to be similar to those of epididymal adipose tissue. Incorporations of $acetate-1-^{14}C$ into lipid of liver were remarkably decreased in high fat diet groups, especially in 45% C group, but in 3% F group were increased more than those of control group. Incorporations of $acetate-1-^{14}C$ into epididymal adipose tissue in 3% F, 45% C and 45% B group at 8 weeks were remarkably increased but not different at 12 weeks, compared with those of control group. The incorporation of {acetate-1-}^{14}C into abdominal adipose tissue appeared to be similar to those of epididymal adipose tissue. Incorporations of $acetate-1-^{14}C$ into lipid of serum in 45% C and 45% B group were reduced reasonably at 4 and 8 weeks of diet as compared with those of control group. Exhalation of $^{14}CO_{2}$ was increased to maximum level at 10 minutes after injection of $acetate-1-^{14}C$. Expiration of $^{14}CO_{2}$ in 45% C and 45% B group were higher than those in 3% F and control group for initial 5 minutes after injection, but expirations of $^{14}CO_{2}$ did not have significant difference among groups of diet since 10 minutes.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.42-50
• /
• 2008

Various researches to reduce weight of a vehicle are achieving. One of these researches is tendencious to manufacture the hollow piston rod using friction welding instead of solid one of the vehicle shock absorber. This study deals with the friction welding of SM45C to SM20C-pipe that is used normally in the vehicle shock absorber. The friction time was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, upset pressure of 75MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests of friction weld were studied and so the results were as follows. When the friction time was l.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 837MPa, which is 113% of SM20C's tensile strength and 97% of SM45C's. The optimal welding conditions were n=2,000rpm, $P_1=55MPa$, $P_2=75MPa$, $t_1=1.5sec$, $t_2=2.0sec$ when the total upset length is 1.7mm.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.314-321
• /
• 2015

Agar-hydrolyzing bacteria were isolated from the coastal sea water of Jeju Island. One isolate, designated as S4, was selected for further study. The S4 cells were Gram-negative and rod-shaped with smooth beige surfaces and single polar flagellum. Cells were grown at $15-42^{\circ}C$, 0.5-5% (w/v) NaCl, between pH 6.0 and 9.0, and in media containing 0.5-5% (w/v) NaCl. The G+C content was 49.93 mol%. The major fatty acids (>15%) were $C_{18:1}{\omega}7c$, $C_{16:0}$ and Summed feature 3 (comprising $C_{16:1}{\omega}7c/iso-C_{15:0}$ 2-OH). Based on 16S rRNA sequencing and biochemical and chemotaxonomic characteristics, the strain was designated as Vibrio sp. S4. In liquid culture supplemented with 0.1% agar the cell density and agarase activity reached a maximum level in 72 h, while agarase activity in the culture without agar was negligible, implying agarose expression is induced by agar. The optimum pH and temperature for the extracellular crude agarase of S4 were 7.0 and $45^{\circ}C$, respectively. However, it also exhibited 98.6% and 87.6% at $40^{\circ}C$ and $50^{\circ}C$, respectively, of the maximum activity seen at $45^{\circ}C$. The crude agarase hydrolyzed agarose into (neo)agarotetraose and (neo)agarohexaose.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.683-688
• /
• 2007

Surface heat treatment of SM45C round bar by diode laser was simulated to find it's condition by using commercial finite element code MARC. Due to axisymmetric geometry, a quarter of model for SM45C round bar was considered and user subroutines were applied to boundary condition for the heat transfer. Material properties such as conductivity, specific heat and mass density were given as a function of temperature. Rotation speed of round bar and feed rate of beam were considered to design heat source model. Shape parameter values of heat source were determined by beam profile. As results, Three dimensional heat source model for diode laser beam conditions of surface hardening has been designed by the comparison between the finite element analysis results and experimental data on SM45C round bar. Diode laser surface hardening for SM45C round bar was successfully simulated and it should be useful to determine optimal heat treatment condition.

• Tribology and Lubricants
• /
• v.16 no.1
• /
• pp.15-21
• /
• 2000

Radiation of Nd-YAG laser changes and refines the surface microstructure of steels, which gives rise to enhancement of hardness and resulting wear resistance. In the present work, the effect of processing parameters during the surface modification with laser on the wear behavior of the SM45C steel was studied by means of wear testing. The counter material was alumina ceramics. The microstructure observation revealed the dependence of molten depth and width on the defocusing distance. The laser modification of steel surface give rise to improved wear resistance in the testing speed range of either <0.2 m/s or >0.9 m/s Material transfer from steel was wear observated the surface of counter material when testing speed was lower than 0.7 m/s.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.814-823
• /
• 2012

Fluctuation of light intensity from the keyhole becomes more significant in full penetration welding than partial penetration welding, since the plasma produced in the keyhole can escape from the rear side of the keyhole. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has been detected with a Photodiode and analyzed under different process conditions. As the results, the BOP was performed for welding, behavior of plasma, spatter or plume was monitored to determine the reference signal. Then, random combination was made for comparison with the reference signal, which aimed at verifying reliability of the welding monitoring system that this study intended to develop.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.499-509
• /
• 1995

PU.1, a tissue-specific transcription activator, binds to a purine-rich sequence(5'-GAGGAA-3') called PU box. The PU.1 cDNA consists of an open reading frame of 816 nucleotides coding for 272 amino acids. The amino terminal end is highly acidic, while the carboxyl terminal end is highly basic. Transcriptional activation domain is located at the amino terminal end, while DNA binding domain is located at the carboxyl terminal end. Activation of PU.1 transcription factor is supposed to be accomplished by the phosphorylation of serine residue(s). There exist 22 serines in the PU.1. Five(the 41, 45, 132$.$133, and 148th) of the serines(plausible phosphorylation site by casein kinase II), are the primary targets of interest in elucidating the molecular mechanism(s) of the action of the PU.1 gene. In this study, PU.1 cDNA coding for the five serine residues(41th AGC, 45th AGC, 132$.$133th AGC$.$TCA, and 148th TCT), was mutated to alanine codon(41th GCC, 45th GCC, 132$.$133th GCC$.$GCA, and 1481h GCT), respectively, by Splicing-Overlapping-Extension(SOE) using Polymerase Chain Reaction(PCR). And each mutated cDNA fragments was ligated into pBluescript KS＋ digested with HindIII and Xba I, to generate mutant clones named pKKS41A, pRKS45A, pMKS132$.$133A, and pMKS148A. The clones will be informative to study the "Structure and Function" of the immu-nologically important gene, PU.1.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.925-933
• /
• 1990

The possible use of bioglass,, which is one of the surface active biomaterials, as implants materials has drawn great attention due to their ability to bond to human living tissue. In the present work, the investigation was carried out to find the bonding phenomena between alumina substrate and bioglass(45S5) or fluorine-containing bioglass(45S5$.$4F), and the properties of coated bioglass. The stable bonding between alumina and bioglass was formed when heat-treated at 1150$^{\circ}C$ for 120 minutes or at 1250$^{\circ}C$ for 30 minutes for the 45S5, and at 1150$^{\circ}C$ for 30 minutes for the 45S5$.$4F. When bioglass coated alumina was heat-treated, great amount of Al was diffused into bioglass from alumina substrate. More Al was diffused into fluorine-containing bioglass than into bioglass without fluorine. At early stage of heat-tretment, the diffused alumina content was increased with the square root of time and it was also increased with the thickness of coating layer and heat-treatment temperatures. The alumina content became constant after its saturation for longer heat-treatment time. Coated bioglasses were crystallized to Na2O$.$CaO$.$3SiO2 when heat-treated at lower temperature, and to CaO$.$SiO2 at higher temperature.