• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.766-770
• /
• 2006

The frictional behavior of oxide films on top of the plasma nitrocarburized compound layers was investigated in terms of post-oxidation treatment temperatures. The post-oxidation treatment at both temperatures($400^{\circ}C,\;500^{\circ}C$) produced magnetite($Fe_3O_4$) films which led to a significant enhancement in corrosion resistance. However, this process did not result in any improvement in frictional behavior of the nitrocarburized surface. The wear mechanisms were governed predominantly by the abrasive action of the slider on the surface irrespective of the counterface material(SiC and Bearing steel). When the specimen was sliding against a SiC counterface, the oxide films were destroyed during the early stage of the sliding process and the wear debris of the oxide film at the sliding track had a great influence on the friction coefficient. On the other hand, when sliding against a bearing steel counterface, the slider was mainly worn out due to the much higher hardness of the surface hardened layer. The fluctuation of the friction coefficient of $400^{\circ}C$-oxidized/ nitrocarburized specimen is much severer than that of $500^{\circ}C$ specimen, due to the less amount of wear debris.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.139-141
• /
• 2009

This study analyzed the effect of the microstructure and alloying element on hydrogen-induced delayed fracture properties for the Energy Saving Wire (ESW) developed recently. Specimens were produced with a diameter 6.5mm post to the deformation (0, 10, 20 and 30%), followed by injecting the hydrogen. The experimental results by using GAS chromatography showed that the more hydrogen was emitted for high-carbon steel (0.45%C steel and 0.35%C steel) than low-carbon steel(0.2%C-Cr steel and 0.2%C-Cr-Mo steel). And, 0.45%C steel, 0.35%C steel and 0.2%C-Cr-Mo steel exhibited the crack for 30% deformed specimen. The hydrogen emitted was analyzed with the amount, the spheroidization, and the size of the carbides.

• Journal of Korea Foundry Society
• /
• v.23 no.2
• /
• pp.86-93
• /
• 2003

It has been a major concern in the foundry that steel castings manufactured by the evaporative pattern casting process encounter the carbon pick-up problem. A carbon rich layer at the evaporative pattern cast surface is a result of interactions between the gaseous products from foamed polystyrene and the molten metal. The carburized layer with a high hardness makes it difficult to machine the casting. In this study, the influence of the density of EPS pattern and coatings on carbon pick-up phenomena of S25C and S45C commercial carbon cast steel were investigated. As the density of EPS pattern is increased, the carbon concentration of decomposed pattern is increased and the thickness of carburized layer at the surface of steel castings is increased. Also as the density of coatings is increased, the permeability of coatings is decreased and the thickness of carburized layer at the surface of steel castings is increased. S25C steel which has lower original carbon content compared to S45C steel exhibited severe carburization.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1998

In this work, fatigue tests by axial loading were carried out to investigate the effect of stress ratio on the growth behaviors of surface fatigue crack for SM45C steel and Al 2024-T4 alloy. The growth behaviors of surface crack have been monitored during fatigue process by measuring system attached CCTV and monitor. When the growth rates of surface crack were investigate by the concept of LEFM based on Newman-Raju's .DELTA.K, the dependence of stress ratio appears both SM45C steel and Al 2024-T4 alloy. Therefore, modified stress intensity factor range, .DELTA.K' [=(1+R)/sup n/.DELTA.K] are intorduced to eliminate the dependence of stress ratio. Using .DELTA.K', it is found that the dependence of stress ratio disappears both SM45C steel and Al 2024-T4 alloy.

• Bulletin of the Korean Mathematical Society
• /
• v.45 no.2
• /
• pp.397-403
• /
• 2008

In this paper, we modify L. $C\breve{a}dariu$ and V. Radu's result for the stability of the monomial functional equation $\sum\limits_{n=0}^{n}n\;C_i(-1)^{n-i}f(ix+y)-n!f(x)=0$ in the sense of Th. M. Rassias. Also, we investigate the superstability of the monomial functional equation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.111-111
• /
• 1999

반도체 소자의 고집적화 및 고속화에 따라 다층 금속배선에서의 RC 지연이 전체 지연의 주된 요소로 되고 있다. 이런 RC 진연을 줄이기 위해서 현재 다층 금속배선의 층간 절연막으로 사용하고 있는 SiO2 박막(k~3.9)을 보다 낮은 유전상수(low-k)를 가지는 물질로 대체할 것이 요구된다. 층간 절연막으로서 가져야 할 가장 중요한 것은 낮은 유전상수와 높은 열적안정성($\geq$45$0^{\circ}C$)이다. 본 연구에서는 Toluene을 precursor로 사용한 PECVD방법으로 low-k 유사중합체 유기박막을 성장시켰으며 부동한 온도에서 성장된 박막의 특성을 비교하여 증착온도가 박막의 특성에 미치는 영향에 대하여 조사하였다. 유사중합체 유기박막은 platinum(Pt)기판과 silicon 기판위에 같이 증착되었다. Precursor는 4$0^{\circ}C$로 유지된 bubbler에 담겨지고 증발된 precursor molecules는 Argon(Ar:99.999%) carrier 가스에 의해 process reactor 내부로 유입된다. Plasma는 RF(13.56MHz generator로 연결된 susceptor 주위에 발생시켰다. Silicon 기판위에 증착한 시편으로 Fourier transform infrared (FTIR) spectra 및 열적 안정성을 측정하였고, Pt 기판위에 증착한 시편으로 Al/유기박막/Pt 구조의 capacitor를 만들어 열적안정성을 측정하였고, Pt 기판위에 증착한 시편으로는 Al/유기박막/Pt 구조의 capacitor를 만들어 K값 및 절연성을 측정하였다. Capacitance는 1MHz 주파수에서 측정하였다. 열적안정성은 30분동안 Ar 분위기에서 annealing하기 전후의 증착막의 두께의 변화를 측정함으로써 조사하였으며 유기박막의 두께는 surface profilometer로 측정하였다. 증착온도가 45$^{\circ}C$에서 15$0^{\circ}C$, 25$0^{\circ}C$로 높아짐에 따라 k값은 높아졌지만 대신 열적안정성은 좋아졌다. plasma power 30W인 경우 45$^{\circ}C$에서 증착했을 때 유전상수는 2.80으로 낮았지만 40$0^{\circ}C$에서 30분 동안 열처리한 후 두께가 49% 감소하였다. 그러나 25$0^{\circ}C$에서 증착했을 때 유전상수는 3.10으로 좀 높아졌지만 열적으로는 40$0^{\circ}C$까지 안정하였으며 45$0^{\circ}C$에서도 두께의 감소는 8%에 불과했다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.45.3-45
• /
• 1998

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.45.2-45
• /
• 1998

• Fisheries and Aquatic Sciences
• /
• v.20 no.7
• /
• pp.14.1-14.8
• /
• 2017

In this study, marine tunicate Styela clava hydrolysate was produced by an environment friendly and green technology, pressurized hot water hydrolysis (PHWH) at different temperatures ($125-275^{\circ}C$) and pressure 50 bar. A wide range of physico-chemical and bio-functional properties such as color, pH, protein content, total carbohydrate content, reducing sugar content, and radical scavenging activities of the produced hydrolysates were evaluated. The appearance (color) of hydrolysates varied depending on the temperature; hydrolysates obtained at $125-150^{\circ}C$ were lighter, whereas at $175^{\circ}C$ gave reddish-yellow, and $225^{\circ}C$ gave dark brown hydrolysates. The $L^*$ (lightness), $a^*$ (red-green), and $b^*$ (yellow-blue) values of the hydrolysates varied between 35.20 and 50.21, -0.28 and 9.59, and 6.45 and 28.82, respectively. The pH values of S. clava hydrolysates varied from 6.45 ($125^{\circ}C$) to 8.96 ($275^{\circ}C$) and the values were found to be increased as the temperature was increased. The hydrolysis efficiency of S. clava hydrolysate was ranged from 46.05 to 88.67% and the highest value was found at $250^{\circ}C$. The highest protein, total carbohydrate content, and reducing sugar content of the hydrolysates were found 4.52 mg/g bovine, 11.48 mg/g and 2.77 mg/g at 175, and 200 and $200^{\circ}C$, respectively. Hydrolysates obtained at lower temperature showed poor radical scavenging activity and the highest DPPH, ABTS, and FRAP activities were obtained 10.25, 14.06, and 10.91 mg trolox equivalent/g hydrolysate (dry matter basis), respectively. Therefore, S. clava hydrolysate obtained by PHWH at $225-250^{\circ}C$ and 50 bar is recommended for bio-functional food supplement preparation.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.401-404
• /
• 2008

Willemite ($Zn_2SiO_4$) are a wide range of applications such as a phosphor host and an important crystalline phase in glass ceramics, electrical insulators, glazes, and pigments. In this study, Willemite precursors were synthesized with zinc silicate gels from mixture of zinc nitrate solution and various sodium silicate solution by the geopolymer technique. To examine the crystallization behavior, precursors were have been monitored by the XRD. A pure willemite phase was obtained at $900^{\circ}C$. TEM investigations revealed that the sample with 50 nm particle size was obtained via heat-treated at $900^{\circ}C$ for W-3.