• 융합신호처리학회논문지
• /
• 제9권3호
• /
• pp.179-187
• /
• 2008

본 논문에서는 저가의 광통신용 단일모드 광섬유와 편광소멸기를 이용한 비편광 광섬유 자이로스코프(D-FOG)를 설계/제작하여, 성능을 평가하였다. D-FOG의 위상오차를 줄이기 위해 사용광원의 전류 및 온도 안정화 회로를 제작하여 그 성능을 분석하였다. 제작된 전류 및 온도 안정화 회로의 전류 안정도는 $200{\mu}A$ 미만, 온도 안정도는 $0.0098^{\circ}C$로 양호한 성능을 보였다. 또한, 본 논문에서 제작된 D-FOG의 회전 각속도 측정 범위는 ${\pm}50^{\circ}/s$, Scale factor error는 2.8881%로 양호한 선형성을 보였으며, zero bias drift는 $19.49^{\circ}/h$의 bias 안정도를 보였다. 이는 고가인 고복굴절 편광 유지 광섬유를 이용해 제작된 기존의 FOG에 비해 높은 가격효율성을 갖는 저가의 FOG 제자의 가능성을 보여준다.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.237-247
• /
• 2016

Global warming caused by greenhouse gases is one of the foremost challenges in the international community. As an alternative to solve this problem, the importance of CCS (Carbon Capture and Storage) technology is increasing. However, due to the delay of European financial crisis recovery, some large-scale CCS projects were postponed. In turn, large-scale CCS projects in South Korea have not been launched as originally planned. Given these situations, it is important to review the latest R&D activities related to CCS in South Korea, and then adjust relevant national policy accordingly. The purpose of this study is to identify policy issues for the effective promotion of CCS technology in South Korea. Following the analysis of recent global trend on CCS policy, we evaluated the results and achievements from national CCS projects, which had been listed under the "Korean National CCS Master Action Plan (2010)". Especially, we tried to review the attainability for the original goal of each project. Through the present study, we identified the current status of CCS technology in South Korea and suggested efficient ways to be taken in order to increase efficiency in implementing national CCS policy in the future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.413-417
• /
• 2004

Recent experiments have shown the 'size effects' in micro/nano scale. But the classical plasticity theories can not predict these size dependent deformation behaviors because their constitutive models have no characteristic material length scale. The Mechanism - based Strain Gradient(MSG) plasticity is proposed to analyze the non-uniform deformation behavior in micro/nano scale. The MSG plasticity is a multi-scale analysis connecting macro-scale deformation of the Statistically Stored Dislocation(SSD) and Geometrically Necessary Dislocation(GND) to the meso-scale deformation using the strain gradient. In this research we present a study of nano-indentation by the MSG plasticity. Using W. D. Nix and H. Gao s model, the analytic solution(including depth dependence of hardness) is obtained for the nano indentation , and furthermore it validated by the experiments.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.914-916
• /
• 2003

Most current 3D digital maps are 2.5 dimension models based on DEM, which can only be recognized, browsed and operated by a special software, far from meeting the needs of a modern digital city (global) with the distributed, isomerous and multiple application on the real 3D representation and open sharing models. In this paper, a new generation digital city oriented 3D digital map is studied. Firstly, a real 3D digital map representation is presented. And then, some key techniques and methods for browser-based 3D digital map’s representation, display and operation are introduced, which can realized the open sharing of 3D map in distributed, isomerous and multiple application environment. Furthermore, the scale driving technique of proposed 3D digital map is also studied. And currently, some developments based on some of the above methods are being carried to provide key and general platform for other application software’s development.

• 대한공간정보학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2005

현재 전국에 산재해 있는 많은 소규모의 저수지들은 관리 상태나 실지 내용적에 대한 정확한 자료가 모두 구비되어 있지 못한 실정이다. 본 연구에서는 행정구역상 저수지가 많이 분포되어있는 영남권의 경주시 73개 소규모 저수지 가운데 23개소를 선정하여 실험을 하였다. RTK-GPS를 이용하여 5초마다 데이터를 취득하였고, E/S를 이용하여 1초 간격으로 수심에 대한 값과 TS를 이용하여 현황 측량을 실시하였다. 이렇게 취득된 자료를 가지고 3D 모델링을 하여본 결과 15개소(약 65%)의 저수지가 앙호한 상태였음을 알 수 있었고, 과거자료와의 비교 분석을 통하여 현재 저수지 상태에 대한 정확한 내용적을 알 수 있었다. 또한 23개소 저수지의 만수면적과 유효저수량을 분석한 결과 만수면적은 20.63%, 유효저수량은 3.34% 만큼 줄어들었음을 알 수 있었다. 이를 통하여 현재 저수지 상태에 대한 분석과 관기 방향에 대한 방법에 대하여 기여하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1343-1345
• /
• 1998

This work was carried out to develop a pattern on the nanometer scale using plasma polymerization and plasma etching. This study is also aimed at developing a resist for the nano process and a vacuum lithography process. The thin films of plasma polymerization were fabricated by the plasma polymerization of inter-electrode capacitively coupled gas flow system. After delineating the pattern at accelerating voltage of 30[kV], ranging the dose of $1-500[{\mu}C/cm^2$], the pattern was developed with dry type and formed by plasma etching.

• 정보과학회 논문지
• /
• 제41권11호
• /
• pp.927-934
• /
• 2014

본 논문에서는 Kinect와 같은 RGB-D 센서를 이용하여 사람의 3차원 신체 포즈 스트림 데이터를 생성하고, 이로부터 사람의 일상 행위를 효과적으로 인식하는 방법을 제안한다. Kinect SDK나 OpenNI에서 제공하는 실시간 신체 포즈 데이터는 Kinect 중심의 3차원 데카르트 좌표계로 표현되기 때문에, 시점 변화 문제와 크기 변화 문제를 겪을 가능성이 높다. 이러한 문제를 해결하고 시점 및 크기 불변인 특징을 얻기 위해, 본 논문에서는 신체 포즈 데이터를 실험자의 골반을 원점으로 하는 구면 좌표계로 변환하고 실험자의 팔 길이를 이용한 크기 정규화를 수행한다. 또한, 본 논문에서는 확률 그래프 모델 중 하나인 은닉 조건부 랜덤 필드를 이용하여, 고수준의 일상 행위들이 내포하는 다양한 내부 구조를 효과적으로 표현한다. 두 가지 데이터 집합 KAD-70과 CAD-60을 이용한 실험을 통해, 본 논문에서 제안한 행위 인식 방법과 구현 시스템의 높은 인식 성능을 확인하였다.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.7-15
• /
• 1996

Full scale experiment was carried out in the southern sea of Korea to compare some important factors tested in the model experiment. The results obtained can be summarized as follows ; 1. The changing aspect of mouth performance of the full scale net was almost coincided with the results obtained by the model experiment. The vertical opening(H) and the opening area(S) can be expressed as a function of the towing velocity(V) as H=48.78. $e^0.38V$(unit: m, k't) S= 1,443 .$e^-0.25V$(unit: $m^2V$, k't) 2. The changing aspect of working depth of the full scale net was almost coincided with the results obtained by the model experiment. The depth(D) can be expressed as a function of the towing velocity(V) and the warp length(L) as D=92.49.$V^1.37$(unit: m, k't, L= 150m) D= 12.07+0.32. L (unit: m, V=2k't) [)= - 7.90+0.22 . L (unit: m, V=3k't) 3. Some problems were found to operate A - type full scale net by common bottom pair trawlers. The problems can be summarized as follows; (1) Entangling of wing and square head ropes while net casting.(2) Man power needed and time spent for net hauling by common bottom trawlers increased considerably.( 3) Tearing of nettings caused by over -load of tension and entangling of net pendant while net hauling. To solve these problems, the trawlers are favorable to be equipped with variable pitch propeller and llet drum. While the net is favorable to be constructed with trifurcated net pendant in stead of quadrifurcated net pendant used at present.

• 성인간호학회지
• /
• 제12권4호
• /
• pp.741-757
• /
• 2000

This study was undertaken to develop an instrument to be used for measuring the concept of quality of life of Korean patients with cancer multidimensionary and correctly. It can contribute in holistic nursing care for Korean cancer patients and also provide and validate basic data to help oncology nurses measure the outcome of nursing intervention correctly. To develop this instrument, the researchers first estabilished a conceptual framework based on the results of qualitative data analysis and indepth interview method Development of the scale was conducted using a method in which 31 items were assessed by subjects' self report using linear analogue scales. The subjects were 79 D.M. patients, 103 patients with acute illness, and 91 cancer patients residing in Busan, Korea. Data were collected during the period from July, 24 to August 14, 2000. This instrument consisted of 31 items with a self report scale. This instrument covered 4 dimensions of cancer patients : 1) physical wellbeing 2) psychological wellbeing 3) social wellbeing and 4)spiritual wellbeing. Each item had a possible score of 10. The reliability of the scale was tested with Cronbach's alpha. Validity was evaluated by examining the relationships of this scale, Youn's Quality of Life Questionnare scores and the Simple Quality of Life scale. Two separate runs of multiple regression were used to predict scores on the Simple Quality of Life measurement. Further validation was obtained by examining the correlation between the instrument subscores and Youn's Quality of Life measurement subscore for convergence of this scale. Examination of the discriminant. power of the instrument was done using ANOVA test. The results are summarized as follows: 1. The reliability of the instrument for the quality of life was 0.8321(Cronbach's alpha.), physical wellbeing dimension 0.6343, psychological wellbeing dimension 0.6501, spiritual wellbeing dimension 0.5883. 2. This instrument had a high correlation with Youn's Quality of Life measurement(r= 0.636) in cancer patients, whereas it had a low correlation with Simple Quality of Life measurement(r=0.455) in cancer patients. In the D.M. patients, the instrument correlated with both the Youn's Quality of Life measurement and Simple Quality of life measurement(r=0.313, r= 0.407) and in the acute stage patients, the instrument had no correlation. 3. Multiple regression of individual items on the Simple Quality of Life scores accounted for 56.8% of the variance in the Simple Quality of Life measurement, whereas, Youn's Quality of Life measurement scores accounts for 31.7%. 4. The correlations collected from the three group had the same patterns of variations but especially the instrument developed in this study had higher disciminant power than that of Youn's Quality of Life Measurement.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.