• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.3-12
• /
• 2016

The aim of this study is to find the optimal combination dyeing condition for the enhancement of dye uptake and union dyeing of the composite material fabric made of triacetate and quick drying PET blended yarn. For the experiment, fabrics were one-bath combination dyed using the mixed dye of E-type disperse dye(C.I Disperse red 50) and S-type disperse dye(C.I. Disperse red 92) to measure dyed fabric's dye exhaustion, dye uptake, color and color difference according to the diverse conditions including dying temperature, time and mixed ratio of the dye. Dye equilibrium of combination dyeing occurred in $100^{\circ}C$, but by comparing dyed fabrics' K/S value and surface color, it was found that $120^{\circ}C$ was where the manifestation of color of triacetate and quick drying PET was identical. Mixed dye exhaustion and dye uptake merely changed as dyeing time increased, but color became more uniform. Therefore, it can be concluded that by using combination dyeing method, and by using the mixed dye which the mixing ratio of S-type dye and E-type dye is appropriately controlled, dye uptake can be improved compared to using single dyeing regardless of the color of E-type dye.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.49-49
• /
• 2012

바닥재 자카드직물에 사용이 예상되는 LMP(low meltig polyester) 복합사는 사염 시 높은 수축율 및 열융착의 가능성 때문에 일반적인 폴리에스테르의 염색조건에서는 염색이 불가하다. 따라서 적정의 수축율 내에서 가능한 염색조건에 대해 고찰하였다. LMP 복합사는 웅진케미컬에서 생산된 Regular PET/LMP(75:25) 260d/48f 원사를 사용하였다. 수축율은 KS K 0215에 준하여 측정하였다. 염색은 E-type 및 S-type(Foron Dark Blue S-WF) 분산염료를 사용하였으며, E-type 중에서는 아조계(Lumacron Blue SERL 200%) 와 안트라퀴논계(Foron Blue E-BL 150)의 2 종류를 사용하였다. 염색된 시료는 현미경 단면사진을 이용하여 염료의 내부확산을 확인하였으며, 환원세정 전후의 K/S 값을 측정하였다. LMP원사의 수축율을 시험한 결과 $90^{\circ}C$에서 9% 정도의 수축율을 나타내어, $90^{\circ}C$ 이상에서는 사염이 어려운 것으로 나타났다. 따라서 염색온도는 $80^{\circ}C$와 $90^{\circ}C$로 하였다. S-type의 염료를 이용한 경우 $90^{\circ}C$에서 4일 이상 염색해도 염착이 이루어지지 않아 대상 염료에서 제외하였다. E-type 염료인 경우 아조계는 흡진율은 높았으나 내부 regular PET에의 확산이 매우 느리고, 안트라퀴논계는 상대적으로 확산이 빠른 것으로 나타났다. 안트라퀴논계 분산염료는 $80^{\circ}C$에서 내부로의 확산에 4일 이상이 소요되며, $90^{\circ}C$에서는 2일 이상이 소요되었다. 이 후 환원세정에 의한 K/S 값의 변화 및 마찰견뢰도를 시험하였으며, 환원세정 후의 섬유단면 사진을 통해 염료의 migration성을 평가하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.52-52
• /
• 2011

나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 초극세와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용 될 수 있다. 특히 나노필라멘트를 이용한 편물제품으로 경편물은 wiping cloth 등 산업용도에 적용되며, 환편물은 인조피혁 등 의류용으로 사용된다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 해도형 나노필라멘트 PET 원사와 일반 PET사를 복합한 2종의 편물을 이용하여 알칼리감량특성 및 3가지 분산염료에 대한 염색성과 견뢰도를 조사하였다. 알칼리 처리조건에 따른 감량률을 측정함으로써 각 편물의 이론 감량률에 도달하는 지점을 확인하고, SEM사진 분석을 통하여 해도사의 감량정도 및 분할특성을 확인하였다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S 값이 증가하였으나, 전체적으로 낮은 K/S값을 얻었다. 또한 염색온도가 110에서 $100^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호 또는 우수하였으나, 일광견뢰도의 경우 1등급으로 매우 낮아 이를 개선하기 위한 노력이 향후 진행되어야 할 것이다.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.70-76
• /
• 2018

The dyeing behaviors of poly(ethylene terephthalate)(PET) bulky yarns, DTY(draw textured yarn) and SSY(latent crimped yarn), were investigated with different energy type disperse dyes compared with those of SDY(spin draw yarn). The maximum exhaustions of E-type disperse Red 60, Blue 56 and Yellow 54 on SSY were 99%, 94% and 93%, respectively. The maximum exhaustions of S-type disperse Red 179, Blue 79 and Orange 30 on SSY were 96%, 97% and 97%, respectively. The K/S values of SSY were significantly higher than those of DTY and SDY in all energy type of disperse dyes. The knit fabric composed of SSY became bulky at the end of high temperature dyeing process because of their thermal shrinkage property due to melt viscosity difference.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.316-320
• /
• 2003

In order to investigate the dyeing property of poly trimethylene terephthalate(PTT) fabric, the dyeing of PTT fabric was carried at under condition of different dyeing temperature by using several disperse dyes with different energy level. Particularly, this study discussed the PTT dyeing thermodynamically. Used disperse dyes were selected based on the their chemical structure and energy level. The obtained results were as followings; The dye adsorption of S type disperse dye such as C. I. Disperse Blue 79 increased with increasing dyeing temperature. In a exhaustion rate of PTT fabric with disperse dyes, C. I. Disperse Blue 56 showed higher values than that of C. I. Disperse Orange 29 and Blue 79. For the interpretation of thermodynamic dyeing behavior, the partition coefficient ( K ) and some several thermodynamic parameters such as standard affinity$(-\mu^\circ)$ and heat of dyeing$(\Delta{H}^\circ)$ calculated from the adsorption isotherm. From above results, as the energy level of disperse dye is small, the partition coefficient and standard affinity increased. But the heat of dyeing of PTT fabric with disperse dye showed high negative value in order of E type(C. I. Disperse Blue 56), SE type(C. I. Disperse Orange 29) and S type(C. I. Disperse 79).

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.797-805
• /
• 2011

This study was carried out to investigate dyeing characteristics of CDP(cation dyeable polyester)/silk knitted fabrics with disperse type cation dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process. The apparent color depth(K/S) of the disperse type cation dyes with CDP and that of acid dyes with silk decreased slowly with increasing pH values of dyebath with the exception of sharp decrease at alkali region for CDP. The contamination behavior of CDP by the acid dyes and that of silk by the disperse type cation dyes decreased with progressing of dyeing. The migration ratio(%) of the disperse type cation dyes with CDP is low compared with that of acid dyes with silk. The sediment in mixed dying solution of disperse type cation dyes and acid dyes remarkably less compared with that of regular type cation dyes and acid dyes at $100^{\circ}C$ regardless applying of preventer agent of precipitation. When CDP/silk knitted fabrics was dyed with by with mixtures of disperse type cation dyes/acid dyes one bath or two bath dyeing method, the characteristic of reflectance spectra of CDP components were greatly influenced by disperse type cation dyes and that of silk components by acid dyes. It was confirmed that K/S values of each components of CDP/silk knitted fabrics dyed by one bath dyeing method decreased slightly compared with two bath dyeing method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.404-414
• /
• 2014

This study investigates the dyeability and fastness of jacquard fabric for blind using low-melting flame retardant polyester. Two types of jacquard fabric were prepared with a low-melting flame retardant polyester and regular polyester. The low-melting flame retardant polyester has a sheath and a core. The core consists of flame retardant polyester and the sheath consists of low-melting polyester. Disperse red 50 (DR 50), disperse blue 56 (DB 56), disperse yellow (DY 54) of E-type dyes and disperse 92 (DR 92), disperse blue 60 (DB 60), disperse yellow (DY 79) of S-type dyes were used and dyed on jacquard fabrics dependent of dyeing temperature and time. The fastness, dye exhaustion, color strength (K/S value), and colorimetric properties of jacquard fabrics were evaluated. The dyeability of S-type dyes were higher than E-type dyes. The experiments indicated optimum dyeability that the dyeing temperature was $110^{\circ}C$ for E-type dyes and $120^{\circ}C$ for S-type dyes for 40 minutes. The fastness to washing and light were excellent at a 4-5 grade.