• 한국광학회지
• /
• 제28권1호
• /
• pp.33-38
• /
• 2017

액정과 같은 단축 이방성 분자들의 상대 복굴절 ${\Delta}n_{rel}$과 질서변수 S가 만족하는 준선형 관계식인 $S=(1+a){\Delta}n_{rel}-a{\Delta}n^2_{rel}$이 보편적인 관계식임을 확인하였다. 액정분자들이 정다면체 대칭분포를 할 경우 굴절률은 등방적이며 $\frac{1}{n^2_{av}}=\frac{1}{3}\(\frac{1}{n^2_e}+\frac{2}{n^2_o}\)$와 같이 구해짐을 확인하였다. 정다면체 대칭성을 가지는 액정의 기본 분포에 분포함수 가중치를 가하여 액정의 정렬정도를 바꾸며 ${\Delta}n_{rel}$과 S를 수치계산 하였다. 또한 액정이 z축 주위 회전대칭성을 가지는 깔때기 모양으로 분포하고 있을 때 깔때기의 중심각을 변화시키며 ${\Delta}n_{rel}$과 S를 수치계산 하였다. 이로부터 S와 ${\Delta}n_{rel}$의 준선형 관계식이 액정의 분포형태와는 무관한 보편적인 관계식임을 보였다.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.1-5
• /
• 2003

In an early paper Skumanich suggested the existence of a scaling law relating the mean sunspot magnetic field with the square-root of the photospheric pressure. This was derived from an analysis of a variety of theoretical spot models including those by Yun (1968). These were based on the Schliiter-Temesvary (S- T) similarity assumption. To answer criticisms that such modeling may have unphysical (non-axial maxima) solutions, the S-T model was revisited, Moon et al. (1998), with an improved vector potential function. We consider here the consequences of this work for the scaling relation. We show that by dimensionalizing the lateral force balance equation for the S- T model one finds that a single parameter enters as a characteristic value of the solution. This parameter yields Skumanich's scaling directly. Using an observed universal flux-radius relation for dark solar magnetic features (spots and pores) for comparison, we find good to fair agreement with Yun's characteristic value, however the Moon et al. values deviate significantly.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1078-1082
• /
• 2005

In this study, the run-up height and reflection property on slopes of S-berm and smooth slopes breakwaters are investigated by laboratory experiment. The run-up height analyzed the effect of reflection coefficient, surf similarity parameter. Measured reflection coefficients of smooth slope breakwaters are compared with those of S-berm breakwater with variable widths. In general, measured coefficients of S-berm breakwaters are smaller than those of smooth slope breakwaters.

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.551-556
• /
• 2011

In this paper new enhanced post-process predicting the speaker's intention was suggested to implement the real-time control module for ship's autopilot using speech recognition algorithm. The parameter was developed to predict the likeliest wheel order based on the previous order and expected to increase the recognition rate more than pre-recognition process depending on the universal speech recognition algorithms. The values of parameter were assessed by five certified deck officers being good at conning vessel. And the entire wheel order recognition process were programmed to TMS320C5416 DSP so that the system could recognize the speaker's orders and control the autopilot in real-time. We conducted some experiments to verify the usefulness of suggested module. As a result, we have confirmed that the post-recognition process module could make good enough accuracy in recognition capabilities to realize the autopilot being operated by the speech recognition system.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.57-62
• /
• 2006

The quality of precision spindle units (S/Us) running on rolling bearings depends strongly on their structural parameters, such as the configuration and geometry of the S/U elements and bearing preloads. When S/Us are designed, their parameters should be optimized to improve the performance characteristics. However, it is practically impossible to state perfectly a general criterion function for S/U quality. Therefore, we propose to use a multicriteria optimization based on the parameter space investigation (PSI) method We demonstrate the efficiency of the proposed method using the optimization results of high-speed S/Us.

• East Asian Economic Review
• /
• 제28권1호
• /
• pp.95-140
• /
• 2024

This study empirically investigates the international transmission of China's uncertainty shocks. It estimates a time-varying parameter Bayesian global structural vector autoregressive model (TVP-BGVAR) using time series data for 33 countries to evaluate heterogeneous international linkage across countries and time. Uncertainty shocks are identified via sign restrictions. The empirical results reveal that an increase in uncertainty in China negatively affects the global economy, but those effects significantly vary over time. The effects of China's uncertainty shocks on the global economy have been significantly altered by China's WTO accession, the global financial crisis, and the recent US-China trade conflict. Furthermore, the effects of China's uncertainty shocks, typically on inflation, differ significantly across countries. Moreover, Trade openness appears crucial in explaining heterogeneous GDP responses across countries, whereas the international dimension of monetary policy appears to be important in explaining heterogeneous inflation responses across countries.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.135-140
• /
• 2004

Morphological and rheological properties of the poly(methyl methacrylate) (PMMA) and polystyrene (PS) blends were studied by scanning electron microscopy (SEM) and advanced rheometric expansion system (ARES). From the SEM results, the PMMA-PS blends showed dispersed morphology and the particle size of the dispersed phase was quite small (0.1~0.6 $\mu\textrm{m}$ compared with other immiscible polymer blends. Values of the interfacial tension of the PMMA-PS blend were obtained from the Choi-Schowalter and the Palierne emulsion models using the storage modulus of the PMMA and PS, and found to be 1.0 and 2.0 mN/m, respectively. The interfacial tension between the PMMA and PS was also calculated from the Flory-Huggins polymer-polymer interaction parameter ($\chi$) and found to be from 0.98 to 1.86 mN/m depending on the molecular weight and composition. Comparing the values of the interfacial tension from the Flory-Huggins polymer-polymer interaction parameter and the values measured by oscillatory rheometer, it is suggested that the interfacial tension of the PMMA-PS blend obtained from the polymer-polymer interaction parameter are in good agreement with the values obtained by rheological measurements.

• Journal of Forest and Environmental Science
• /
• 제36권1호
• /
• pp.7-16
• /
• 2020

Tree size distribution modelling is an integral part of forest management. Most distribution yield systems rely on some flexible probability models. In this study, a simple finite mixture of two components two-parameter Weibull distribution was compared with complex four-parameter distributions in terms of their fitness to predict tree size distribution of teak (Tectona grandis Linn f) plantations. Also, a system of equation was developed using Seemingly Unrelated Regression wherein the size distributions of the stand were predicted. Generalized beta, Johnson's SB, Logit-Logistic and generalized Weibull distributions were the four-parameter distributions considered. The Kolmogorov-Smirnov test and negative log-likelihood value were used to assess the distributions. The results show that the simple finite mixture outperformed the four-parameter distributions especially in stands that are bimodal and heavily skewed. Twelve models were developed in the system of equation-one for predicting mean diameter, seven for predicting percentiles and four for predicting the parameters of the finite mixture distribution. Predictions from the system of equation are reasonable and compare well with observed distributions of the stand. This simplified mixture would allow for wider application in distribution modelling and can also be integrated as component model in stand density management diagram.

• 소성∙가공
• /
• 제23권4호
• /
• pp.199-205
• /
• 2014

The current study examines the effect of the analytical parameter values on the theoretical forming limit diagram (FLD) based on the Marciniak-Kuczynski model (M-K model). Tensile tests were performed to obtain stress-strain curves and determine the anisotropic properties in the rolling, transverse and diagonal direction of SPCC sheet materials. The experimental forming limit curve for SPCC sheet material was obtained by limiting dome stretching tests. To predict the theoretical FLD based on the M-K model, the Hosford 79 yield function was employed. The effects of three analytical parameters - the exponent of the yield function, the initial imperfection parameter and the fracture criterion parameter - on the M-K model, were examined and the results of the theoretical FLD were compared to the experimentally measured FLD. It was found that the various analytical parameters should be carefully considered to reasonably predict the theoretical FLD. The comparison of the acceptable forming limit area between the theoretical and experimental FLD is used to compare the two diagrams.

• 열처리공학회지
• /
• 제7권3호
• /
• pp.155-159
• /
• 1994

As Cr-Mo-V steels have excellent mechanical and creep properties at elevated temperatures, they are extensively used in power plants. However, the steam turbine components are supposed to have suffered material degradation during long-term service at elevated tenperatures. Many efforts have been made to assess the safety and residual life of these components by means of non-destructive methods such as plastic replication, hardness and electric resistance techniques. Recently, a parameter correlating hardness changes during long-term heating to those during creep was introduced and it was named 'G parameter'. The electric resistivity as well as hardness are affected by damage accumulation, but there have been no efforts to correlate G parameter to resistivity changes. In this study, relationship between G parameter and changes in electric resistivity was investigated using artificially aged Cr-Mo-V steel. It is well understood that G parameter can be applied to electric: resistance techmique.