본 논문에서는 Winsor systems으로부터 제조된 AOT 에멀젼의 안정성을 염화나트륨의 농도 변화에 따라 관찰하였다. 에멀젼은 헵탄+염화나트륨 수용액+AOT고 구성하였다. 염화나트륨 농도의 증가에 따라 안정성은 증가를 보이다가 일정 농도 이후에는 안정성이 급격히 감소하였다. 저 농도 염화나트륨에서는 크리밍 현상이 주로 유상과 수상의 비중 차이에 의한 단일 입자의 상승에 기인하였다. 시간 경과에 따른 크리밍 현상의 모델를 개발하여 적용한 결과 저 농도의 염화나트륨에서는 실험 결과와 잘 일치하였으나 고 농도의 염화나트륨에서는 에멀젼 입자가 작아지면서 (입자의 부력이 감소) 입자 사이의 반발력이 감소하고 오히려 인력이 증가하면서 안정성이 감소하였다.
데이터 처리 속도는 예보 능력과 관련이 있다. 최신의 입력 자료를 이용한 예측 데이터의 고속 생산은 신속한 대처를 가능하게 한다. 또한 알고리즘 작성, 계산, 결과 평가, 알고리즘 개선으로 이어지는 순환 구조를 원활하게 할 뿐만 아니라 오류 발생시 빠른 시간 내에 복구할 수 있게 하는 등 매우 중요한 요소이다. 현재의 조기경보 시스템은 매 계산 주기 마다 섬진강 유역의 10개 시군에 대해 30미터 해상도의 격자형 자료를 400개 이상 생성하고 있으며(중간 데이터 포함) 최대 9일까지 예보되는 자료를 포함할 경우 600개 이상이다. 이는 전국을 30미터 해상도로 약 45개를 생성하는 계산양과 비슷하다. 또한 14,000여개의 필지에 대한 구역 통계와, 각 래스터의 평균, 최대, 최소 등의 통계자료 생성도 함께 수행 해야 한다. 이와 같은 대량의 데이터를 한정된 시간 내로 처리하기 위한 몇 가지 기법을 적용하여 적용하였으며, 아직 적용은 못하였으나 가능성의 여부를 평가해 보는 것으로 본 연구를 진행하였다. 그 결과 앞서 제시된 래스터 캐시, NFS 캐시, 분산 처리를 모두 적용할 경우 데이터 처리 시간을 1/8로 단축 시킬 수 있음이 확인되었다. 또한 GPU를 이용한 연산을 적용할 경우 일부 모듈에 대해 매우 큰 폭으로 수행 시간을 단축 시킬 수 있음을 확인하였다. 다만 캐시를 위한 추가적인 디스크, GPU라는 별도의 하드웨어, 추가된 하드웨어 지원을 위한 고출력 전원 장치와 이에 따른 UPS (Uninterruptible power supply, 무정전 전원공급 장치)까지 상대적으로 높은 사양으로 준비해야 하는 비용적인 문제가 발생할 수 있다. 본 연구에서 제시한 네 가지 기법 중 세 가지는 계산 서버 추가를 통한 수평적 성능 확장에 관한 것이다. 하지만 서버의 추가가 처리 속도 향상으로 이어지지 않음은 물론 오히려 저하시키는 경우가 있다. 본 연구에서는 특정 시간 내로 작업을 완료 시키지 못하면 해당 작업을 반환하여 다른 서버가 처리하는 간단한 방식을 이용한다. 하지만 이런 문제를 지속적으로 발생시키는 계산 서버가 발견된다면 정해진 기준에 따라 계산 작업에서 완전히 퇴출 시켜야 성능 향상에 도움이 된다. 따라서 처리 속도에 대한 정확한 원인을 검사하고 이를 실시간으로 반영할 수 있는 기법이 필요하다.
Semmah, Abdelwahed;Beg, O. Anwar;Mahmoud, S.R.;Heireche, Houari;Tounsi, Abdelouahed
Advances in materials Research
/
제3권2호
/
pp.77-89
/
2014
In the present article, the thermal buckling of zigzag single-walled carbon nanotubes (SWCNTs) is studied using a nonlocal refined shear deformation beam theory and Von-Karman geometric nonlinearity. The model developed simulates both small scale effects and higher-order variation of transverse shear strain through the depth of the nanobeam. Furthermore the present formulation also accommodates stress-free boundary conditions on the top and bottom surfaces of the nanobeam. A shear correction factor, therefore, is not required. The equivalent Young's modulus and shear modulus for zigzag SWCNTs are derived using an energy-equivalent model. The present study illustrates that the thermal buckling properties of SWCNTs are strongly dependent on the scale effect and additionally on the chirality of zigzag carbon nanotube. Some illustrative examples are also presented to verify the present formulation and solutions. Good agreement is observed.
Estimating the habitat potential of inland forest patches for birds requires the modeling of species-area relationships, or relationships between habitat size and numbers of bird species in each patch. The accurate estimation of speciesarea relationships significantly reduces the effort required to recognize the number of species living in each patch. The objective of this study was to estimate the relationship between forest patch size and bird species diversity in Dangjin County, in northwest South Korea, based on the sizes of inland forest patches. KOMPSAT-2 images were obtained and ortho-rectified to construct a map of the target forest patches. The numbers of birds per patch were surveyed four times: August 2008, September 2008, February 2009 and May 2009. Regression models were derived to explain the relationships between the numbers of bird species and patch size. A model that was derived using data from all four observation periods had the highest coefficient of determination ($R^2$). According to these models, the numbers of bird species at first increased linearly with increasing patch size; however, the curve then plateaued. Our model including observations from four seasons will be useful for estimating the numbers of bird species in other inland forest patches in South Korea.
Purpose: Service quality plays an important role in the credibility of consumer behavior as it enhances brand loyality in hospitality business. The objective of this study is to determine the effects of service quality, positive emotion, brand affection, and brand loyalty in restaurant sector by applying the S-O-R model. The study also introduces a new integrated structural model that combines service quality's dimensions of physical quality, interaction quality, and outcome quality. Research design, data, and methodology: This study was analyzed in a quantitative way using the survey results of 395 customers who had experience of visiting restaurants. All constructs were measured with multiple items developed and validated in prior studies. In this study, SmartPLS 4.0 was used to evaluate the research model. The reliability, convergent validity, and discriminant validity of the measurement tool were verified. Result: Result was found that service quality(physical quality, interaction quality, outcome quality) had a positive effect on positive emotion and brand affection. Also both of positive emotion and brand affection had a positive effect on brand loyalty. This study contributes to the service quality literature and has practical managerial implications.
Park, Jinhye;Bucik, R.;Moon, Yong-Jae;Kahler, S.W.
천문학회보
/
제43권1호
/
pp.52.1-52.1
/
2018
We investigate initial Fe/O enhancements for 44 large gradual solar energetic particles events from 2010 to 2014 and examine the associations of the Fe/O enhancements with the structures of the heliospheric current sheet (HCS). For this study, we use STEREO SIT Fe and O data in 0.32-0.45 MeV channel as well as ACE ULEIS Fe and O data in 0.32-0.64 MeV channel. We determine 1) the magnetic polarities of the SEP source regions using the potential field source surface (PFSS) model of the coronal field and 2) the spacecraft magnetic footpoints with Parker spiral approximation of interplanetary magnetic field using the in-situ measurements of STEREO and ACE. We find that 29 out of 44 events have initial Fe/O enhanced more than 5 times of the typical gradual event values. In the 6 events, the enhancements are simultaneously observed by two spacecraft. There is a tendency that the high Fe/O enhancements are observed near SEP source regions. It is also noted that the Fe/O enhancements are associated with the polarity of the magnetic footpoints. The high Fe/O enhancements are usually observed where their footpoints lie in the same polarity regions of SEP sources rather than the opposite polarity regions. Although Fe/O enhancements could be due to a transport effect and/or a flare contribution, our result implies that the structure of HCS is likely to affect particle propagations in the interplanetary space.
Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.
본 연구는 Escherichia coli O157:H7, Salmonella Typhimurium 그리고 Listeria monocytogenes에 대하여 천연항균제와 유기산을 이용한 분무 살균제 (aerosol sanitizer)의 살균효과를 검토하였다. 실제 가공공장의 주요 기계나 기구로 사용하는 stainless steel을 coupon으로 이용하여 인위적으로 접종한 식중독 미생물을 model cabinet에서 5분 동안 자몽종자추출물(grapefruit seed extract), acetic acid, citric acid 그리고 lactic acid로 처리 하였다. 3가지 식중독 미생물의 수는 GEF와 유기산 단독 처리시 0.34-3.77log의 균 감소를 나타내었고, 병행 처리시 1.72-3.89 log의 균 감소를 나타내었고 GEF, 유기산 그리고 알코올을 병행 처리시 1.46-5.05 log의 균 감소효과를 나타냈다. 세 종류의 유기산 중 항균력이 가장 높은 것으로 측정된 lactic acid를 이용하여 scale-up 모델에서 10분 동안 처리 한 결과는 E. coli O157:H7, S. Typhimurium 그리고 L. monocytogenes는 각각 3.42, 2.72, 2.30log의 균 감소를 나타내었다. 따라서 천연항균제와 유기산을 이용한 분무 살균제는 안전한 식품에 대한 소비자의 수요를 충족시키고, 환경 위생 방법으로 사용할 수 있다고 생각되었다.
This study investigates the heat and mass transfer characteristics of a MoS2 nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS2 nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS2 nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS2-C2H6O2 nanofluids can potentially optimize temperature distribution and fluid dynamics.
절제된 IIIA N2병기 비소세포형 폐암에 있어서 종격동임파절의 전이 양상에 따른 임상적 특성을 알아보고, 예후에 미치는 영향에 대해 평가해 보고자 하였다. 대상 및 방법: 1991년 1월부터 2000년 12월까지 비소세포형 폐암으로 폐엽절제술 이상의 수술을 받은 환자 중 수술 전 항암 화학요법 또는 방사선 치료를 받은 환자와 수술 사망 환자를 제외한 174명을 대상으로 후향적 연구를 자였다. 결과: 상엽 종양에서 하부 종격동임파절로 전이된 경우 5년 생존율은 32.3%로서,하부 종격동임파절 전이가 없는 환자의 5년 생존율 25.6%와 차이가 없었다(p=0.86). 하엽 종양에서 상부 종격동임파절로 전이된 경우 5년 생존율은 25.1%로, 상부 종격동임파절 전이가 없는 환자의 5년 생존율 14.1%와 비교하여 통계학적인 차이가 없었다(p=.33). 전체 환자 중 subcarinal node로의 전이에 따른 생존율의 비교시 전이 유무에 따른 5년 생존율에 차이가 없었다(20.9% vs 25.6%, p=0.364). 전이된 종격동임파절의 station수에 따른 비교 시 single station군의 5년 생존율은 26.3%로, multiple station군의 18.3%보다 생존율이 유의하게 높았다(p=0.048). Multiple station군에 있어서 수술 후 항암 화학 요법 및 방사선 치료를 병행한 경우 5년 생존율 34.2%로서 생존율의 향상이 있었다(p=0.01). 수술 후 생존에 영향을 미치는 인자로는 연령 $\geq$60세(O.R: 1.682, p=.006), multiple station N2 (O.R: 1.503, p=.021), 전페절제술(O.R: 1.562, p=.018), 수술 후 항암 화학요법 및 방사선 치료(O.R: 0.625, p=.012)등이 있었다. 결론: 절제된 IIIA N2 병기 비소세포형 폐암에 있어서 전이된 종격동임파절 부위의 수(single vs multiple station)가 술 후 생존에 영향을 미치는 중요한 예후 인자였으며, multiple station N2의 경우 수술 후 항암 화학요법 및 방사선 치료를 병행함으로써 생존율을 높일 수 있으리라 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.