• 한국농공학회지
• /
• 제23권3호
• /
• pp.78-87
• /
• 1981

This study was attempted to get dimensionless unit hydrograph by linear model which can be used to the estimation of flood for the development of Agricultural water resources and laid emphasis on the application of dimensionless unit hydrographs for the ungaged watersheds by applying linear model. The results summarized through this study are as follows. 1.Peak discharge is found to be Qp= CAR (C =0. 895A-o.145) having high significance between peak discharge, Qp and effective rainfall, R within the range of small watershed area, 84 to 470km2. consequently, linearity was acknowledged between rainfall and runoff. Reasonability is confirmed for the derivation of dimensionless unit hydrograph by linear model. 2.Through mathematical analysis, formula for the derivation of dimensionless unit hydrograph was derived. qp--p=(tp--t)n-1[e-(n-1)](tp--t-1) 3.Moment method was used for the evaluation of storage constant, K and shape parameter, n for the derivation of dimensionless unit hydrograph. Storage constant, K is more closely related with the such watershed characteristics as length of main stream and slopes. On the other hand, the shape parameter, n was derived with such watershed characteristics as watershed area, river length, centroid distance of the basin and slopes. 4.Time to peak discharge, Tp could be expressed as Tp=1. 25 (√s/L)0.76 having a high significance. 5.Dimensionless unit hydrographs by linear model stood more closely to the observe dimensionless unit hydrographs On the contrary, dimensionless unit hydrographs by S.C. S. method has much difference in comparison with linear model at the falling limb of hydrographs. 6.Relative errors in the q/qp at the point of 0.8 and 1.2 for the dimensionles ratio by linear model and S. C. S. method showed to be 2.41, 1.57 and 4.0, 3.19 percent respectively to the q/qp of observed dimensionless unit hydrographs. 7.Derivation of dimensionless unit hydrograph by linear model can be accomplished by linking the two empirical formulars for storage constant, K, and shape parameter, n with derivation formular for dimensionless unit hydrograph for the ungaged small watersheds.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1444-1450
• /
• 2019

The fast-neutron shielding behaviour (FNSB) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated using effective removal cross section, ${\Sigma}_R(cm^{-1})$, mass removal cross section, ${\Sigma}_{R/{\rho}}(cm^2g^{-1})$ and Mean free path, ${\lambda}$ (cm). These parameters decide neutron shielding behaviour of any material. A computer program - WinNC-Toolkit has been used for computation of these parameters. The toolkit evaluates these parameters by using elemental compositions and densities of samples. The proficiency of WinNC-Toolkit code was probe by using MCNPX and GEANT4 to model fast neutron transmission of the samples under narrow beam geometry, intending to represent the actual experimental setup. Direct calculation of effective removal cross section ($cm^{-1}$) of the samples was also carried out. The results from each of the methods for each types of the studied clay-materials (Ball clay and Kaolin) shows similar trend. The trend might be the fingerprint of water content retained in each of the samples being baked at different temperature. The compositions of each sample have been obtained by Particle-Induced X-ray Emission (PIXE) technique (Tandem Pelletron Accelerator: 1.7 MV, Model 5SDH). The FNSB of the selected clay-materials have been compared with standard concrete. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their FNSB.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• 멤브레인
• /
• 제6권4호
• /
• pp.219-226
• /
• 1996

본 연구에서는 2축 회전판형 한외여과막 모듈의 순수투과율 예측모델과 1% 절삭유의 분리특성 및 투과율 예측모델을 유도하였다. 2축 RDM은 한외여과막(UOP사, 직경 0.22m)을 씌운 같은 크기의 회전판막 20개를 장착한 후 막간격과 각속도($\omega$)에 따른 분리특성을 조사하였다. 2축 RDM의 순수 투과율은 각속도가 41.89rad/s에서 9.95% 감소하여서 1축 RDM의 감소율 3.01%보다 높았다. 2축 RDM은 회전판막이 겹친 부분에서 난류의 발생으로 미끄럼 흐름에 의한 압력 강하는 $(2.5{\omega}r)^{2}$에 비례하였다. 회전판막 간격이 3mm인 $J/J_{o}$(절삭유의 투과율/순수 투과율)는 각속도가 31.42rad/s에서 2.62rad/s로 감소할 때 0.64에서 0.31로 감소하였고 간격이 7mm 일 때의 $J/J_{o}$는 0.64에서 0.27의 감소하여 비슷한 경향을 보였다. 1축 RDM에 사용된 투과율 예측모델식을 변형하여 유도된 2축 RDM의 모델식은 실험결과와 잘 일치하였다.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.35-61
• /
• 1978

동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.34-34
• /
• 1978

동력경운깅가 일반 경사지에서 견인주행하는 경우 견인주행성능과 주행특성을 구명하기 위하여 토양의 종류 및 상태는 일정하게 하고 지면의 기하학적 조건과 견인주행속도 및 견인하중을 변수로 하여 외부동력전달계의 시점인 좌우차륜과 토양간에 발생하는 차륜구동력 및 굴름정항과 Engine에서 구동륜까지 내부전달계를 통하여 전달된 동력의 이론치와 실험치와의 부합여부를 검정하고 부가적으로 동력경운기가 경사지기계화의 동력기로써의 가능성여부와 문제점을 찾으려한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권3호
• /
• pp.44-58
• /
• 2017

The purpose of this study is to prove the Korean Internet company, Kakao's resilience capacity. For it, this paper reviews the previous literatures regarding Kakao's business models and discusses 'resilience' theory. Then, it organizes the research questions based on the theoretical background and explains the research methodology. It investigates the case of Kakao's business and organization. The case analysis shows that five levers of resilience are a good indicator for a successful platform business evolution. The five levers are composed of coordination, cooperation, clout, capability, and connection: First lever, coordination that makes the company to restructure its silo governance in order to respond to actual business flow starting from the basic asset like game and music content; second lever, cooperation where the firm provides creative people with playground for startups such as KakaoPage; third lever, clout where the company shares its data by opening its API of AI and chatbot to $3^{rd}$ party developers; fourth lever, capability where the firm establishes AI R&D center, KakaoBrain as the function of multi-domain generalist for developing diverse platforms tackling customer needs; and the last fifth lever, connection where the firm continues to expand its platform business to the peripheries, O2O businesses such as KakaoTaxi, KakaoOrder, KakaoPay, and KakaoBank. In conclusion, this study proposes Internet companies to be a resilient platform utilizing those five levers of resilience in order to form successful platform. This study contributes to the agile innovation of Internet platform with ecological sense.

• Molecular & Cellular Toxicology
• /
• 제4권2호
• /
• pp.170-176
• /
• 2008

The quantitative structure-activity relationship (QSAR) of a set of 35 flavonoid compounds presenting antioxidant activity was established by means of Genetic Algorithm-Multiple Linear Regression (GA-MLR) technique. Four-parametric models for two sets of data, the 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical scavenging activity $(R^2=0.788,\;Q^2_{cv}=0.699\;and\;Q^2_{ext}=0.577)$ and scavenging activity of reactive oxgen species (ROS) induced by $H_2O_2 (R^=0.829,\;Q^2_{cv}=0.754\;and\;Q^2_{ext}=0.573)$ were obtained with low external predictive ability on a mass basis, respectively. Each model gave some different mechanistic aspects of the flavonoid compounds tested in terms of the radical scavenging activity. Topological charge, H-bonding complex and deprotonation processes were likely to be involved in the radical scavenging activity.

• Journal of Forest and Environmental Science
• /
• 제28권2호
• /
• pp.63-67
• /
• 2012

Crown ratio is the ratio of live crown length to tree height. It is often used as an important predictor variable for tree growth equation. It indicates tree vigor and is a useful parameter in forest health assessment. The objective of the study was to develop crown ratio prediction models for Tectona grandis. Based on the data set from the temporary sample plots, several non linear equations including logistics, Chapman Richard and exponential functions were tested. These functions were evaluated in terms of coefficient of determination ($R^2$) and standard error of the estimate (SEE). The significance of the estimated parameters was also verified. Plot of residuals against estimated crown ratios were observed. Although the logistic model had the highest $R^2$ and the least SEE, Chapman-Richard and Exponential functions were observed to be more consistent in their predictive ability; and were therefore recommended for predicting crown ratio in the stand.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.523-526
• /
• 2002

This paper presents the simulation of Au / $Ba_{x}$S $r_{1-x}$ Ti $O_3$(BSTO) / Magnesium oxide (MgO) multi-layered and electrically tunable band-pass filters (BPFs) by using high frequency structure simulator (HFSS). This model is a two-pole microstrip edge coupled filter. The filter was designed fur a center frequency about 5.8 GHz. The tunabillity of the filter is achieved using the nonlinear dc electric-field dependence on the relative dielectric constant of BSTO frroelectric thin film. This work seems very promising for future wireless communication systems....