• Clinical and Experimental Reproductive Medicine
• /
• 제9권1_2호
• /
• pp.43-53
• /
• 1982

여성의 난소기능은 뇨중 Oestrone-3-glucuronide를 간편한 solid-phase 의 화학발광성 면역학적 측정법 (Chemiluminescence Imrnunoassay(CIA) 에 의하여 그 기능이 탐지될 수 있다. Oestrone-3-g1ucuronyl-6-bovine serum albumine에 대한 antiserum의 IgG fraction은 polystyrene 실험관벽에 흡착시켰으며, 항원으로서는 est r one-3- gl ucuronyI-6-aminoethyl-ethyl-isoluminol 을 항원 (antigen) 에 labeI 시킨 것이다. 시험 대상물인 뇨는 매일아침뇨(early morning urine) 을 희석 (1:1000 V/V)한 후 100mcl 를 취하여 이를 각기 이중분석액으로 택하였다. 시험관 내에서 결합반응 (1 hour at $4^{\circ}C)이 일어난 후에는 시험관내의 액체를 전부 흡입 폐기시켰으며, 항체반응이 일어난 후 ( antibody-bound fraction )에는 완충액 (400mcl)으로 한번 세척시켰다. 그후 염화수산화물(2N , 200mcl)을 가지고 $22^{\circ}C$에 60 분간 방치 혼합케 한 후 효소(microperoxidase) 와 과산화수소를 가하면서 산화작용에서 발생되는 발광양을 10초동안 측정하여 그 결과를 분석하였다. 위에 기술한 분석방법을 평가하면 다음과 같은 결론을 얻었다. Calibration curve sensitivity$3.12{\pm}0.75$ PG/tube ($mean{\pm}SD$)였고, lntra-assay precision(CV%) 9.52 (20 replicates;$38.4{\pm}3.66$nmol/1) 와 8.81 (15 replicates; $102.4{\pm}8.82$nmol/1)였다. Inter-assay precision(CV%) 은 11.9 (mean of 4 pools-7.03, 23.16, 52.11 과 117.53 nmol/1)로 2개월 동안에 걸쳐 시행되었고, 평균 비이어스(mean bias)는 -0.78 로 28에서 448 nmol 범위로서 매일아침 "뇨"의 차이분(different aliquots)은 좋은 결과를 얻었다. 건강한 여성으로부터 채취된 뇨중 Oestrone-3-glucuronide 의 농도(nmol/1)를 보면 월경주기의 여포기와 배난기 및 황체기에 있어서 각기 $40.2{\pm}9.9$ , $102.3{\pm}39.4$와 $84.3{\pm}13.3$nmol/1였다. 이와같은 결과는 동일한 검사뇨를 방사면역학적 방법(RIA)으로 측정 (6 menstrual cycle)한 결과와 유사한 측정치를 얻으므로서 간편하고 진보된 좋은 방법중의 하나라고 사료되는바이다.

• 천문학논총
• /
• 제14권1호
• /
• pp.33-37
• /
• 1999

We have constructed a synthetic spectrum of the 2.5 micron $C_2H$ bands and compared them with diminutive structures in the near-infrared spectra of Comets P/Halley and West (1976 VI). We found that the Q branches of the $C_2H$ bands coincide with two small emission peaks in the spectra of the comets. We undertook Monte Carlo simulations using observed emission intensities of $C_2$ and possibly $C_2H$ in Comet P/Halley in order to derive a lifetime range of $C_2H$ and a production rate at the time of observations of P/Halley. We obtained a $C_2H$ production rate of $1\times10^{27}\;sec^{-1}$ for P/Halley on December 20, 1985, assuming the 2.5 micron features are due to $C_2H$. We derived a very short lifetime (<100 seconds) of $C_2H$ at 1AU heliocentric distance, assuming that the only parent molecule for $C_2H$ and $C_2$ is $C_2H$. Using this short lifetime we were unable to fit our $C_2$ distribution model to $C_2$ distribution curves observed by O'Dell et al.(1988), because our curve shows a steep slope compared with the observed one. We conclude that there must be significant additional source(s) for $C_2H$ and $C_2$ other than $C_2H_2$.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.125-137
• /
• 1989

To check technical improvement in the soundness and strength of 12% Cr steel rotor, a 25 tons of rotor with 65 tons of ingot was made in real size and was cut to pieces to take test samples, and the various mechanical tests such as impact, tensile, creep, and fatigue were carried out. The strengths are compared with those of 1% Cr-Mo-V rotor of same size. Microstructures of the samples are examined and reviewed. The results can be summarized as follows. 1) Fracture appearance transition temperatures are 80.deg. C at the center part and 60.deg. C near surface of 12% Cr rotor, and 8.deg. C near surface of 1% Cr-Mo-V rotor. 2) Comparative rapid softening occurs at higher temperatures above 600.deg. C for 12% Cr steel and 550.deg. C for 1% Cr-Mo-V steel in tension tests. 3) Fatigue crack propagation rate of 12% Cr steel is almost same as that of 1% Cr-Mo-V steel at the same corresponding surface part of the rotors. The crack growth rate of center part of 12% Cr rotor is faster than near surface part of the rotor, and the crack growth rate at the load condition of R=0.04 is slower than that of the load condition of R=0.5 for both 12% Cr steel and 1% Cr-Mo-V steel. 4) Crack growth rate of radial direction near surface of 12% Cr rotor is faster than that of transverse direction at the same part because of the difference in residual stresses. 5) Both creep and fatigue strengths of 12% Cr steel are superior to those of 1% Cr-Mo-V steel and the difference is thought the effect of climb and glide controlled creep by solid solution of alloying elements and dispersion of carbides.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권17호
• /
• pp.7923-7927
• /
• 2015

Background: The Cox PH model is one of the most significant statistical models in studying survival of patients. But, in the case of patients with long-term survival, it may not be the most appropriate. In such cases, a cure rate model seems more suitable. The purpose of this study was to determine clinical factors associated with cure rate of patients with breast cancer. Materials and Methods: In order to find factors affecting cure rate (response), a non-mixed cure rate model with negative binomial distribution for latent variable was used. Variables selected were recurrence cancer, status for HER2, estrogen receptor (ER) and progesterone receptor (PR), size of tumor, grade of cancer, stage of cancer, type of surgery, age at the diagnosis time and number of removed positive lymph nodes. All analyses were performed using PROC MCMC processes in the SAS 9.2 program. Results: The mean (SD) age of patients was equal to 48.9 (11.1) months. For these patients, 1, 5 and 10-year survival rates were 95, 79 and 50 percent respectively. All of the mentioned variables were effective in cure fraction. Kaplan-Meier curve showed cure model's use competence. Conclusions: Unlike other variables, existence of ER and PR positivity will increase probability of cure in patients. In the present study, Weibull distribution was used for the purpose of analysing survival times. Model fitness with other distributions such as log-N and log-logistic and other distributions for latent variable is recommended.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.253-258
• /
• 2006

한반도는 고도의 산업화와 도시화로 인해 깨끗한 MT 및 GDS 자료를 획득하기 매우 어렵다. 이러한 환경에서는 적당한 신호 대 잡음비를 가지는 자료를 선별하는 전처리 과정이 필수적이다. 본 연구에서는 전자기장의 분광에너지에 기반한 자동 전처리 과정(RMP)을 한반도의 현실적인 상황을 고려하여 수정하였고, 이를 한반도 내륙에서 획득된 총 7 측점의 MT 자료에 적용하였다. 전반적으로, RMP 기법은 주기 10초 대역 부근에서 주파수에 따른 전기비저항과 위상의 연결성을 상당히 향상시켰다. 또한 RMP 기법에 의한 결과는 수작업으로 편집된 기존의 처리 결과와도 거의 유사였고, 특히 전기 비저항의 연결성면에서 그 우수성이 확인되었다.

• Biomolecules & Therapeutics
• /
• 제6권4호
• /
• pp.423-428
• /
• 1998

Aceclofenac is an orally effective non-steroidal anti-inflammatory agent of the phenylacetic acid derivative. Bioequivalence study of two aceclofenac preparations, the test drug (Senafe $n_{R}$: Daewon Phar-maceutical Company) and the reference drug (Airta $l_{R}$: Daewoong Pharmaceutical Company), was conducted according to the guidelines of Korea Food and Drug Administration (KFDA). Sixteen healthy male volunteers, 24$\pm$4 years old and 63.9$\pm$6.9 kg of body weight in average, were divided randomly into two groups and administered the drug orally at the dose of 100 mg as aceclofenac in a 2$\times$2 crossover study. Plasma concentrations of aceclofenac were monitored by HPLC method for 12 hr after administration. AU $Co_{-12h}$ (area under the plasma concentration-time curve from initial to 12 hr) was calculated by the linear trapezoidal method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{msx}$) were compiled directly from the plasma drug concentration-time data. Student's t-test indicated no significant differences between the formulations in these parameters. Analysis of variance (ANOVA) revealed that there are no differences in AU $Co_{12h}$, $C_{max}$ and $T_{max}$ between the formulations. The apparent differences between the formulations were far less than 20% (e.g., 0.25, 0.01 and 7.32 for AU $Co_{-12h}$, $C_{max}$. and $T_{max}$, respectively). Minimum detectable differences (%) between the formulations at $\alpha$=0.05 and 1-$\beta$=0.8 were less than 20% (e.g., 14.65, 12.47 and 15.46 for AU $Co_{-l2h}$, $C_{max}$ and $T_{max}$, respectively). The 90% confidence intervals for these parameters were also within $\pm$ 20% (e.g.,-10.19~10.68, -8.87~8.89 and -3.69~ 18.33 for AU $Co_{-12h}$, $C_{msx}$ and $T_{max}$, respectively). These results satisfy the bioequivalence criteria of KFDA guidelines, indicating that two formulations of aceclofenac are bioequivalent.quivalent.ivalent.ent.t.ent.

• 한국전자파학회논문지
• /
• 제28권4호
• /
• pp.286-297
• /
• 2017

본 논문에서는 10개 단일 증폭기를 공간 결합하여 6~18 GHz의 광대역에서 동작하는 50 W급 공간 결합 고출력 전력 증폭기를 연구하였다. 동축형 공간 결합기는 안티-포달 안테나와 같은 원리로 동작하는 핀라인-마이크로스트립 라인 변환기로 이루어져 있으며, 이 변환기는 6~18 GHz의 광대역 특성을 갖도록 설계되었다. 그러므로 공간 결합기 설계에서 가장 중요한 부분은 PCB로 구현되는 핀라인-마이크로스트립 라인 변환기의 형상이며, 이는 Klopfensein의 최적 임피던스 Taper에 근거하여 설계한다. 또한, 10개로 구성된 단일 증폭기의 공간 결합 효율을 최대화 하기 위해 증폭 기간의 이득과 위상차를 각각 제어할 수 있는 CMOS 기반의 MFC(Multi-Function Core) MMIC와 10 W급 이상의 GaN 기반 종단 PA MMIC를 직접 개발하여 단일 증폭기에 내장하였다. 제작된 공간 결합 고출력 전력증폭기는 6~18 GHz의 거의 전대역에서 50 W 이상의 양호한 출력 특성을 보여준다.

• BMB Reports
• /
• 제31권1호
• /
• pp.25-30
• /
• 1998

Kinetic studies of L-Alanine dehydrogenase from Bacillus subtilis-catalyzed reactions in the presence of $Zn^{2+}$ were carried out. The substrate (L-alanine) saturation curve is hyperbolic in the absence of the metal ion but it becomes sigmoidal when $Zn^{2+}$ is added to the reaction mixture indicating the positive cooperative binding of the substrate in the presence of zinc ion. The cooperativity of substrate binding depends on the xinc ion concentration: the Hill coefficients ($n_H$) varied from 1.0 to 1.95 when the zinc ion concentration varied from 0 to $60\;{\mu}m$. The inhibition of AlaDH by $Zn^{2+}$ is reversible and noncompetitive with respect to $NAD^+$ ($K_i\;=\;5.28{\times}10^{-5}\;M$). $Zn^{2+}$ itself binds to AlaDH with positive cooperativity and the cooperativity is independent of substrate concentration. The Hill coefficients of substrate biding in the presence of $Zn^{2+}$ are not affected by the enzyme concentration indicating that $Zn^{2+}$ binding does not change the polymerization-depolymerization equilibria of the enzyme. Among other metal ions, $Zn^{2+}$ appears to be a specific reversible inhibitor inducing conformational change through the intersubunit interaction. These results indicate that $Zn^{2+}$ is an allosteric competitive inhibitor and substrate being a non-cooperative per se, excludes the $Zn^{2+}$ from its binding site and thus exhibits positive cooperativity. The allosteric mechanism of AlaDh from Bacillus subtilis is consistent with both MWC and Koshland's allosteric model.

• 소성∙가공
• /
• 제29권5호
• /
• pp.257-264
• /
• 2020

This paper is concerned with the influence of the plastic property of the rivet on the numerical prediction of the Self-Piercing Rivet (SPR) Joining. In order to predict the plastic property of the rivet, a ring compression specimen was directly fabricated from the rivet used for the mechanical joining of dissimilar materials, and the FE analysis together with the ring compression test was iteratively carried out by changing the plastic property of the rivet. For reliable FE analysis, a friction coefficient was estimated based on a friction calibration curve, measuring the reductions in inner diameter and height of the ring specimen after the compression test. From each simulation result, the force-displacement curves were then compared from each other so as to obtain the rivet plastic property that shows good agreement with the experimental result. The SPR joining between GA590 1.0t and Al5052 2.0t was conducted, and the numerical prediction was performed with the use of the plastic property evaluated based on the inverse analysis and the one referred from Mori et al. [11]. Comparison of the experiment and the numerical predictions in terms of the interlock and bottom thickness revealed that the reliable evaluation of the plastic property of the rivet is necessary for the trustworthy numerical prediction of the SPR joining.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1281-1292
• /
• 2001

Experiments were done for the comparison of performance and flow characteristics between a two -stage axial flow fan and a counter-rotating axial flow fan. Each stage of the two -stage axial flow fan used fur the present study has an eight bladed rotor and thirteen slater blades. The front and the rear rotor of the counter - rotating axial flow fan have eight blades each and are driven by coaxial counter ro latins shafts through a gearbox located between the rear rotor and the electric motor. Both of the two axial fan configurations have identical rotor blades and the same operating condition fur the one -to-one comparison of the two. Performance curves of the two configurations were obtained and compared by varying the blade pitch angles and axial gaps between the blade rows. The fan characteristic curves were obtained following the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fa n flow characteristics were measured using a five-hole probe by a non-nulling method. The velocity profiles between the hub and tip of the fans were measured and analyzed at the particular operating condition s of peak efficiency, minimum and maximum pressure coefficients. The peak efficiency of the counter-rotating axial fan was improved about 2% respectively, compared with the two stage axial fan. At the minimum pressure coefficient point of the two stage axial fan, the fan inlet flow patterns show that axial velocity highly decreased in the vicinity of the blade tip region. Also, the reverse flow took place at the blade tip.