• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.761-768
• /
• 2000

In order to investigate how the fatigue damage effects on the critical properties of superconductor, a fatigue test at room temperature and an Ic measurement test at 4.2K were carried out in this study, respectively, using a 9 strand Cu-Ni/NbTi/Cu composite cable. Through the fatigue test of a 9 strand Cu-NUNbTi/Cu composite cable, a conventional S-N curve was plotted even though there was a possibility of fretting among strands. It was found that the maximum stress corresponding to the inflection point on the S-N curve obtained was nearly the same value as the yielding strength of cable obtained from the static tensile test. However, the effect of cabling in multi-strands superconducting cable on the fatigue strength was not noticeable. The critical current(Ic) measurement was carried out at 4.2K in a NbTi strand out of the fatigued cable. It showed a degradation of lc at high stress amplitude regions over 380NTa, and the degradation became significant as the applied stress amplitude increased.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.207-212
• /
• 2004

Full-beads of multi-layer steel engine head gaskets that are used to seal the combustion gas between the head and the block are subject to cyclic bending stresses due to the variation of the head/block gap during engine operation. The S-N curve for the fatigue durability assessment of the full-bead formed on NBR-coated SUS301 thin plate is deduced from the axial fatigue test results because of the difficulty in conducting the bending fatigue test of thin plate. The experimental verification of the deduced S-N curve is presented. It is shown that the NBR coating increases the endurance limit of the plate significantly. Mechanism of crack nucleation and propagation in the full-bead is discussed with photographs of the fatigue cracks.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.201-207
• /
• 2010

철도 레일의 누적통과톤수에 의한 교체주기기준은 레일의 휨 피로수명에 의해 결정된다. 레일의 휨 피로수명을 평가하기 위해서는 기본적으로 레일의 휨 피로거동(S-N선도)에 대한 분석이 필요하다. 본 연구에서는 국내에서 사용되고 있는 50kg/m, 60kg/m 레일에 대하여 신품 및 사용 용접레일(모재부, 테르밋용접부, 가스압접부)로 구분하여 실물 휨 피로시험을 수행하였으며, 휨 피로시험결과를 바탕으로 파단유형 및 파단면 분석, 파괴 확률에 따른 휨 피로거동(S-N선도) 분석을 수행하였다. 이를 통해 레일종류별, 용접방법별, 신품 및 사용레일에 대한 S-N선도를 도출하였다. 이는 향후 누적통과톤수에 의한 레일 피로수명 평가를 위해 반드시 필요한 기초 자료로서 활용될 것으로 기대된다.

• International Journal of Computer Science & Network Security
• /
• 제21권3호
• /
• pp.60-70
• /
• 2021

In this paper we study the problem of implementation of security issues of blue tooth, especially secure simple pairing, with the help of an efficient four user authenticated key (4UAK) for an elliptic curve cryptography (ECC). This paper also deals with the design, implement and performance evaluation of secure simple pairing (SSP) using an elliptic curve cryptography, such as Diffie Hellman protocol when four users are involved. Here, we also compute the best, worst and average case step counts (time complexities). This work puts forth an efficient way of providing security in blue tooth. The time complexity of O(n⁴) is achieved using Rabin Miller Primality methodology. The method also reduces the calculation price and light communication loads.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.151-155
• /
• 2000

칼라 렌즈 제작시 착색 시간에 따른 분광반사율을 측정하여 렌즈표면의 굴절률을 계산하였다. 착색 시간이 길수록 반사율과 굴절률은 커진다. 렌즈 표면에 착색물질이 포화상태가 될 때까지 굴절률은 시간에 따라 증가하였다. 시간에 따른 blue color 렌즈의 굴절률 변화 곡선은 Boltzmann 성장곡선을 따르며, 이때 $n_{min}$은 1.482. $n_{max}$는 1.497. $t_c=11.53$ 그리고 $d_0$ 등의 2.287 등의 parameter 값을 얻었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.154-159
• /
• 2004

In this study, in order to perform more efficiently reliability design and integrity assessment of structural members, the relational database management program on the engineering plastics was constructed. This program contained 476 grades for 14 kinds of the engineering plastics and was developed using MS-access and MS-visualbasic. This program consists of 3 modules; search condition, probabilistic characteristics of material property, evaluation of P-S-N curve. We perform fatigue test for probabilistic durability analysis and this results input the database program to estimate P-S-N.

• 연구논문집
• /
• 통권34호
• /
• pp.59-68
• /
• 2004

The hot spot stress approach and the notch strain approach are discussed with some results of them. And a stress model that can be applicable to several types of weld joints with single S-N curve of the base material. The stress model uses the geometric characteristics of the stress distribution vicinity of weld joints. The model was applied to five different weld joins(the base material is SM490B). By the representative stress, the experimental fatigue data are plotted very closely to the S-N curve of the base material.

• 오토저널
• /
• 제12권6호
• /
• pp.11-17
• /
• 1990

자동차용 변속기의 설계에 있어서 적용 Engine의 출력 및 차량 성능에 부합하는 동력전달 요소의 전달 용량 및 내구 수명을 고려해야 한다. 특히 자동차가 고속 경량화됨에 따라 변속기의 설계에 있어서도 동력전달 요소들의 소형 고용량화가 요구되며 이를 위해서는 설계시 동력전달 요소들의 정확한 강도 및 피로수명 예측이 필수적이다. 본 보고서에서는 Gear의 굽힘응력 계산식에 대한 고찰 및 Gear의 피로시험을 통하여 Helical 치차의 Bending stress에 대한 피로수명 곡선의 시험식을 도출하였다.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.106-119
• /
• 2002

The fatigue curve with estimated parameters represents the estimate of the median or mean life at a given applied stress But, in order to assist a designer in making decisions regarding the fatigue failure mode, it is common practice to construct a design curve on the lower or safe side of data. In this study, to overcome the limitations(i.e., no runout, equal variance, and quality of the approximation, etc) of Shen, Wirsching, and Cashman's method which suggested the approximate design curve for nonlinear models using tolerance interval constructed by Owen's method, an algorithm to find design curves under the fatigue model using a parametric bootstrap method, is proposed and illustrated with multiple fatigue data sets.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.724-733
• /
• 2003

Fatigue design rules for welds in the ASME Boiler and Pressure Vessels Code are based on the use of Fatigue Strength Reduction Factors(FSRF) against a code specified fatigue design curve generated from smooth base metal specimens without the presence of welds. Similarly, stress intensification factors that are used in the ASME B3l.1 Piping Code are based on component S-N curves with a reference fatigue strength based on straight pipe girth welds. But the determination of either the FSRF or stress intensification factor requires extensive fatigue testing to take into account the stress concentration effects associated with various types of component geometry, weld configuration and loading conditions. As the fatigue behavior of welded joints is being better understood, it has been generally accepted that the difference in fatigue lives from one type of weld to another is dominated by the difference in stress concentration. However, general finite element procedures are currently not available for effective determination of such stress concentration effects. In this paper, a mesh-insensitive structural stress method is used to re-evaluate the S-N test data, and then more effective method is proposed for pressure vessel and piping fatigue design.