• 제목/요약/키워드: S-Mode

검색결과 6,350건 처리시간 0.035초

항구 입출항용 항법 요구성능을 위한 우리나라 R-Mode 항법시스템의 테스트베드 개발 현황

  • 황태현;한영훈;손표웅;김영기;서기열
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 추계학술대회
    • /
    • pp.209-211
    • /
    • 2022
  • 우리나라 R-Mode(Ranging Mode) 항법시스템은 국제해사기구(IMO, International Maritime Organization)에서 요구하는 항구 입출항용 항법 요구성능(정밀도 10m)을 만족하도록 개발을 진행하고 있다. R-Mode 항법시스템은 위성국 송출을 기반으로 하는 GPS와 달리 지상국 송출을 기반으로 한다. 또한 신호가 세기가 높아서 의도적 전파간섭이 어려우므로 국제해사기구가 요구하는 강인한 PNT(Resilient PNT) 시스템에 적합한 것으로 평가받고 있다. 이러한 요구조건과 기회신호(SoOp, Signal of Opportunity)의 국내 환경에 맞추어 중파(MF, Middle Frequency) 및 초단파(VHF, Very High Frequency)를 이용하는 항법시스템을 개발하고 있다. 해양수산부의 지원으로 2020년에 착수하여 4국의 중파 R-Mode 송신국과 3국의 초단파 VDES R-Mode 송신국 구축을 진행하고 있다. 항법 성능을 확보하기 위하여 R-Mode 보정시스템과 R-Mode 감시시스템을 구축하였다. 해양에서 R-Mode 항법시스템의 성능을 검증하기 위하여 중파 R-Mode 수신기, VDES R-Mode 수신기 및 이를 포함하는 통합항법수신기를 함께 개발하고 있다. 항법 송신기 및 수신기의 성능 검증을 위한 테스트베드는 기존의 지상파 항법(eLoran) 서비스 영역, 중파 R-Mode 서비스 영역 및 주요 항만 등을 고려하여 충청남도 서산시 대산항 지역으로 선정하였다. 보정국 및 감시국을 포함하는 테스트베드 기지국은 대산항에 설치하여 운영을 시작하였다. 테스트베드 실해역 시험을 통한 성능 검증은 2023년 상반기에 진행될 계획이다.

  • PDF

수면 모드를 이용하는 EPON에서 QoS 향상을 위한 대역 할당 알고리즘 (Bandwidth Allocation Algorithm for Improving QoS in EPON with Sleep Mode)

  • 양원혁;정진효;김영천
    • 한국통신학회논문지
    • /
    • 제37권7B호
    • /
    • pp.489-498
    • /
    • 2012
  • 최근 가입자 망의 에너지 절감을 위하여 수면 모드를 이용하는 EPON(Ethernet-Passive Optical Network)에 관한 연구가 활발히 진행되고 있다. 수면모드를 이용하는 EPON은 ONU(Optical Network Unit)의 주기적 수면을 보장하기 위하여 상향 데이터 전송과 하향 데이터 전송을 동시에 수행한다. 그러나 기존 대역 할당 알고리즘은 ONU의 수면 시간 증가를 위하여 상향 대역 요청 중심으로 대역을 할당하므로 OLT(Optical Line Terminal)의 입력 부하가 ONU의 입력 부하보다 클 때 하향 데이터의 QoS를 보장하기 어렵다. 따라서 본 논문에서는 수면모드를 이용하는 EPON에서 QoS를 보장할 수 있는 대역 할당 알고리즘을 제안한다. 제안한 알고리즘은 OLT의 각 하향 데이터 버퍼가 QoS 임계값을 넘었을 때 이를 ONU의 상향 대역 요청과 비교하여 QoS를 만족 시킬 수 있는 대역을 선택적으로 할당한다. 따라서 제안한 알고리즘은 각 ONU의 적절한 수면시간을 통해 에너지를 절감하면서도 상 하향 데이터의 QoS를 보장 할 수 있다. 제안한 대역 할당 알고리즘의 성능평가를 위하여 ONU의 총 수면시간, OLT와 ONU의 큐잉 지연시간 및 OLT의 할당 대역 이용률 관점에서 OPNET을 이용한 시뮬레이션을 수행한다.

두부 CT 검사 시 검사 모드에 따른 화질 및 선량평가 (Image Quality and Dose Assessment According to Examination Mode during Head CT Examination)

  • 강헌효;최우전;김동현
    • 한국방사선학회논문지
    • /
    • 제15권4호
    • /
    • pp.437-444
    • /
    • 2021
  • 두경부 CT 검사시 팬텀을 이용하여 Helical mode, High Pitch Mode, Volume Axial Mode 사용하여 획득한 CT 영상으로부터 환자의 피폭선량과 각 영상의 화질을 비교 및 분석하여 Volume Axial Mode의 유용성을 평가해보고자 한다. 두경부 CT 검사 시 각 mode에 따른 70 kVp, 80 kVp, 100 kVp 관전압에 따라 검사를 시행하였다. 사용 장비로는 GE사의 Revolution(GE Healthcare, Wisconsin USA) 모델과 iMED X-ray Phantom을 이용하였다. 검사 Mode에따른 kVp별로 얻어진 영상을 이용하여 팬텀의 피폭선량을 비교하였으며, 각 영상에 ROI를 설정해 신호대 잡음비와 대조도대 잡음비를 산출하여 영상의 화질을 비교하였다. Volume Axial Mode를 사용하여 검사하였을 때 팬텀의 피폭선량이 Helical에 비해 17.12% 낮게, High Pitch에 비해 5.35% 낮게 측정되었고, 신호대 잡음비와 대조도대 잡음비가 향상되었다. Volume Axial Mode는 고속 회전 스캐너를 이용하여 테이블의 이동이 없이 조사시간을 줄이고, High Pitch Mode와 Helical Mode를 사용했을 때 보다 팬텀의 0.28초의 단시간에 영상을 획득하여 피폭선량이 감소하고 영상의 화질 또한 향상되는 유용한 검사라 할 수 있다. 또, 몸이 불편한 환자의 촬영이나 긴급환자의 CT 촬영에 있어서 Volume Axial Mode의 빠른 검사시간은 최대의 장점이라고 볼 수 있다.

MVRDV의 건축에 나타난 공간 구성 수법에 관한 연구 (A Study on Spacial Characterristics of MVRDV's Architecture)

  • 조영배
    • 한국실내디자인학회논문집
    • /
    • 제17권1호
    • /
    • pp.77-83
    • /
    • 2008
  • MVRDV is most important architect as created interesting architectural space in contemporary architecture, and so they applies to the unique theory in their architecture. They used to architectural diagram, program, datascape, density as a design tool. Especially, they have create new architectural space and form in using architectural diagram, program, datascape, density, and void. So, this study is purposed to explain how they use as architectural tool to make composition of it's architectural space and is purpose to explain what is their main concept in architectural space. MVRDV's architectural space has fundamental methodology. That is Datascape on uncertainty and continuity between urban space and architectural space. The former consist in using diagram and architectural program and the latter consist in operating architectural void and inner continuity surface. The conclusion is follows 1. The mode of spacial composition by architectural void is correspond density of city as MVRDV's architectural thinking. 2. The mode of spacial composition by architectural program is ambiguous to the boundary between inner and exterior space by transparency. 3. The mode of spacial composition by architectural diagram make to generate the architectural form and space, through the reinterpretation and relocation of architectural program. 4. The mode of spacial composition inner continuity plane is make relative between site and inner space.

적층 Unidirectional CFRP 판의 이방성과 Lamb wave의 $S_0$ Mode 군속도의 관계 (The Relationship Between Group velocity of Lamb wave $S_0$ Mode and Anisotropy in Laminated Unidirectional CFRP Plates)

  • 이정기;김영환;이승석;김호철
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2004년도 추계학술발표대회 논문집
    • /
    • pp.272-277
    • /
    • 2004
  • The elastic waves in the plate are dispersive waves with the characteristics of Lamb waves. However, $S_0$ symmetric mode is less dispersive in the frequency region less than first cut-off frequency. And, in anisotropic plates such as CFRP plates, the propagation velocities vary with the direction. So, the wave vector direction to be the phase velocity direction is not accord with the energy flow direction to be the group velocity direction. In this work, the group velocities of the $S_0$ symmetric mode less than the first cut-off frequency was analyzed with the group velocity dispersion curves in unidirectional CFRP plate. And, the group velocity curve obtained by the group velocity dispersion curves are compared with the measured velocities as varied the propagation direction of the Lamb wave. The measured velocities are good agreement with the corrected group velocity curve except near the fiber direction which is called the cusp region. When the propagation direction is not accorded with the principal axis, the direction of the group velocities declines to the fiber direction in the unidirectional CFRP plates. This implies that the energy propagates preferentially toward fiber direction.

  • PDF

연선의 혼합 모드 산란 계수 측정 시스템 (Mixed-mode S-parameter Measurement System of Twisted Pairs)

  • 안정식
    • 한국정보통신학회논문지
    • /
    • 제22권6호
    • /
    • pp.888-894
    • /
    • 2018
  • 본 논문에서는 연선의 성능 측정을 위한 혼합 모드 산란계수 측정시스템을 제안하였다. 연선은 균형 형태의 소자로써 일반적으로 동축 형태로 구현된 네트워크 분석기를 이용하여 특성 측정이 불가능하다. 이때, 발룬을 이용하여 균형 신호와 불균형 신호 간 변환을 통해 측정이 가능하지만 측정 주파수 대역폭이 제한되는 문제가 있다. 제안하는 시스템은 발룬을 사용하지 않고 4포트 벡터 네트워크 분석기와 설계한 고정구를 이용하여 혼합모드 산란계수를 측정하여 연선의 성능을 측정한다. 제안하는 시스템을 이용하여 상용 이더넷 케이블의 성능을 측정해보고 발룬의 이용한 결과와 비교해 보았다. 이를 통해 제안하는 시스템을 이용해 연선의 성능 측정이 가능함을 확인하였다.

새로운 적응 슬라이딩 모드 관측기를 이용한 PMSM 센서리스 속도 응답특성 향상 (Enhancement of the Speed Response of PMSM Sensorless Control Using A New Adaptive Sliding Mode Observer)

  • 김홍열;손주범;이장명
    • 전기학회논문지
    • /
    • 제59권1호
    • /
    • pp.160-167
    • /
    • 2010
  • This paper proposes an adaptive sliding mode observer (SMO), which adds the estimation function of the stator resistance to a new sliding mode observer for the robust sensorless control of permanent magnet synchronous motor (PMSM) with variable parameters. To reduce the chattering problem commonly found in the conventional sliding mode observer where the low-pass filter and additional position compensation of the rotor are used, the sigmoid function is used for the control of a switching function in this research. With the estimation of the stator resistance, the proposed observer can improve the control performance by reducing the estimation error of the motor's speed. Note that the stator resistance is varying with the ambient temperature and becomes an error source for the sensorless control of PMSM. The new sliding mode observer has better efficiency than the conventional adaptive sliding mode observer by reducing the time consuming integral calculations. The stability of the proposed adaptive sliding mode observer is verified by the Lyapunov function in determining the observer gains, and the effectiveness of the observer is demonstrated by simulations and experiments.

로이적응모델의 가족건강사정에의 적용가능성 (Feasibility of Application of Roy's Adaptation Model to Family Health Assessment)

  • 장선옥
    • 한국보건간호학회지
    • /
    • 제8권2호
    • /
    • pp.35-56
    • /
    • 1994
  • This article was intended to survey whether Roy' Adapation model ('Roy Model') can be applied to family health assessment and to study whether application of the Roy Model to a Korean family is feasible. under the Roy Model, a family is viewed as an adaptation system having a series of process of input. process, feedback, and output. Further, the Roy Model indicates that a family contains Physiolosical, self-concept. role function and interdependent mode in respect of internal or external stimuli. In the event where the family health assessed, the adaptation mode of that family must be assess at the first stage. Then, the focal, contextual, residual stimuli affecting the family must be assessed. In 1984 Hanson suggested four types of family adaptation mode based upon the Roy Model and thereby enhanced the possibility for family health assessment. In order survey whether the Roy Model can be applied to the Korean family, the author of this article contracted adults of 169 who live in 'A' city to make open questions regarding family and then analyzed responses from them by utilizing Roy model. This study categorized family Adaptation mode based upon the' four types of family adaptation mode developed by Hanson. As a result of this study, family adaptation mode was categorized into 117 concepts. Those 117 concepts are consisted or Physiolosical mode of 47. self­concept mode of 56, role function mode of 9 and interdependent mode of 5. Further. stimuli affecting family were classified based upon Roy's definition as to three types of stimuli. Stimuli on a family are comprised focal stimuli concept of 19, contextual stimuli concepts of 19, one residual stimuli concept. this result implies that the Roy's Model can be applied to Korean family. Physiological mode shows meaning of survival. while self-concept mode reflects meaning of growth and emphasizes harmony among the family based on the familism. The role function mode shows continuity rather control of family member. By contrast, interdependent mode shows interaction with community to which the family belongs. but the degree of interaction does not appear too high. The analysis of family stimuli led this study to conclude that troubles within a family. changes in family structure and diease of family member generate stimuli. However, an application of the Roy Model contains the following problems: First, Roy argued that the family adaptation mode should be assessed at the first level family health assessment and then stimuli affecting family adaptation should be adaptation assessed at the second stage. To the belief of the author of this article. however, for checking family adaptation level. focal, contextual, residual stimuli should be confirmed by assessing stimuli at first stage. Then, the family adaptation mode in respect of such stimuli should be assessed. The rationale for this is that the family adaptation level is determined depending on degree of strength of focal. contextual. residual stimuli. Second. Whall (1991) raised a question 'Does one assess family adaptation mode and intervene in the stimuli?' 'Likewise, assessment of the family adaptation should be made in the following manner in order for family health to be enhanced. Third. Roy believes that additional stimuli (such as contextual and residual) are same as internal process (including nurturance. support, and socialization). However, the basis for this Roy's belief is not too clear. In spite of these problems which the author indicated above, it can be concluded that the Roy Model can serve as a good device for an assessment of family health and that the Roy Model can be applied to a Korean family. Finally, further research of family adaptation theory and family nursing theory is required for a development of these theories.

  • PDF

탄소섬유 복합재료의 모드1 및 모드 2 층간파괴인성치에 관한 연구 (A Study on Mode 1 and Mode 2 Interlaminar Fracture Toughness of Carbon Fiber Reinforced Plastics)

  • 김재동;고성위
    • 수산해양기술연구
    • /
    • 제31권3호
    • /
    • pp.272-278
    • /
    • 1995
  • 강도가 각각 다른 세 종류의 프리프레그를 사용하여 일방향 CFRP를 적층하였으며, 모드 I과 모드 II 실험을 통하여 층간 파괴인성치를 고찰하였고, 또한 적층 섬유방향을 변화시킨 사교적층판의 그것도 함께 고찰하였으며, 이를 요약하면 다음과 같다. 1) 임계에너지 방출률 G 하(IC)의 값을 컴플라이언스 법, 수정 컴플라이언스 법, 그리고 보이론에 의해 계산하여 비교 검토한 결과 본 연구에서 사용한 수정식에 의한 값들이 거의 일치하였다. 2) G 하(IC) 값은 대체로 프리프레그의 C, B, A재의 순으로 높게 나타났으며, G 하(II C)의 값을 세가지 식에 의해 계산하여 비교 검토한 결과 거의 일치하였다. 3) 사교적층판의 경우 G 하(IC) 값은 [0/90] 하(6s), [0/45] 하(6s), [0/45/90] 하(6s)의 순으로 높게 나타났으며, G 하(II C)는 [0/90] 하(6s), [0/45/90] 하(6s), [0/45] 하(6s)의 순으로 높게 나타났다. 4) 사교적층판과 일방향의 임계에너지 방출률을 비교하였을 때, 모드 I의 경우 일방향의 결과가 다소 높았으며, 모드 II의 경우는 [0/45] 하(6s)의 결과는 거의 일치함을 알 수 있었다.

  • PDF