• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.213-220
• /
• 2000

Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1041-1043
• /
• 1993

Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)＋dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.47-57
• /
• 2016

PURPOSES : This study aims to examine the differences between the existing traffic demand forecasting method and the traffic demand forecasting method considering future regional development plans and new road construction and expansion plans using a four-step traffic demand forecast for a more objective and sophisticated national highway maintenance. This study ultimately aims to present future pavement deterioration and budget forecasting planning based on the examination. METHODS : This study used the latest data offered by the Korea Transport Data Base (KTDB) as the basic data for demand forecast. The analysis scope was set using the Daejeon Metropolitan City's O/D and network data. This study used a traffic demand program called TransCad, and performed a traffic assignment by vehicle type through the application of a user equilibrium-based multi-class assignment technique. This study forecasted future traffic demand by verifying whether or not a realistic traffic pattern was expressed similarly by undertaking a calibration process. This study performed a life cycle cost analysis based on traffic using the forecasted future demand or existing past pattern, or by assuming the constant traffic demand. The maintenance criteria were decided according to equivalent single axle loads (ESAL). The maintenance period in the concerned section was calculated in this study. This study also computed the maintenance costs using a construction method by applying the maintenance criteria considering the ESAL. The road user costs were calculated by using the user cost calculation logic applied to the Korean Pavement Management System, which is the existing study outcome. RESULTS : This study ascertained that the increase and decrease of traffic occurred in the concerned section according to the future development plans. Furthermore, there were differences from demand forecasting that did not consider the development plans. Realistic and accurate demand forecasting supported an optimized decision making that efficiently assigns maintenance costs, and can be used as very important basic information for maintenance decision making. CONCLUSIONS : Therefore, decision making for a more efficient and sophisticated road management than the method assuming future traffic can be expected to be the same as the existing pattern or steady traffic demand. The reflection of a reliable forecasting of the future traffic demand to life cycle cost analysis (LCCA) can be a very vital factor because many studies are generally performed without considering the future traffic demand or with an analysis through setting a scenario upon LCCA within a pavement management system.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.482-496
• /
• 2016

Algal blooms of cyanobacteria (blue-green Algae) due to the eutrophication of rivers and lakes can cause not only the damage by its biological toxins but also the economic loss in drinking water treatment. The natural algae coagulant, a commercial product known as W.H. containing the algicidal and allelopathic material derived from oak, can control algal problems proactively through the coagulation flotation process. However, because there have been no applications of the process for pre-treatment in drinking water plants, we could find no report on the optimum injection dose of W.H.. In this study, we have conducted several sets of jar-tests while changing W.H. dose and concentration of chl-a for (1) Han-river samples and (2) subcultured cyanobacteria samples, and monitored the removal mechanisms of algae intensively. Based on these jar-test results, two linear equations with variables of chl-a and turbidity have been deduced to predict the optimal W.H. dose after the multiple regression analysis using IBM-SPSS. Also, prototypes of automatic control logic have been suggested to inject the optimal W.H. dose promptly in response to the variation of water quality.

• Journal of Distribution Science
• /
• v.13 no.3
• /
• pp.79-91
• /
• 2015

Purpose - First, the study identifies and analyzes consumer preferences with regard to health foods and supplements. Second, it identifies and analyzes consumer preferences with regard to the properties of Vitamin C supplements. Third, in order to provide a basic data for the development of Vitamin C supplements and to measure how consumers value the properties of different Vitamin C products, a consumer survey was conducted through the choice-based conjoint model. Based on the results, the research estimates consumers' relative product-related priorities as well as price levels and willingness to pay (WTP) for different product types, and makes suggestions regarding consumer-oriented new product development and progressive directions for the successful launch of health foods and supplements. Research design, data, and methodology - This study aims to define the attributes of health foods and supplements based on several characteristics including their natural ingredients, product price, product originality, natural ingredient content, and additional functional ingredients, and makes suggestions regarding strategic market pricing and product development for health foods and supplements according to customer attitudes and characteristics. The research used choice-based conjoint analysis methodology based on the Multinomial Logic Model and collected 94 questionnaires filled out by users of Korean Vitamin C supplements. Results - Product price is the most influential factor among the five analyzed properties. When consumers buy Vitamin C products, the relative significance level of four of the examined properties is as follows: 40.9% for product price, 23.3% for product originality, 21.9% for natural ingredient content, and 13.9% for additional functional ingredients. Vitamin C content is excluded as it is not a statistically significant factor. It is interesting that supplement manufacturers and retailers consider Vitamin C content to be very important whereas consumers do not regard it as an important factor at the time of purchase. The results for the marginal willingness to pay (MWTP) for each property of Vitamin C supplements show that consumers are willing to pay an additional 11,146 Korean won for a 50% increase in the natural ingredient content. With regard to product originality, consumers are willing to pay an additional 11,301 Korean won for products manufactured in Europe than for products manufactured in China. Moreover, consumers show a greater preference for products manufactured in Korea than in Europe. However, consumers are not willing to pay more for additional Vitamin C or additional functional ingredients added to Vitamin C products. Conclusions - According to the results of consumer research on Vitamin C supplements, which represent a popular health food supplement in Korea, most Korean health food and supplement companies are not consumer- or market-oriented when developing new products. Companies gather information from either R&D specialists or sales managers and their opinions are highly reflected in new product development. The study's results will help companies recognize the importance of understanding consumers' unmet needs in advance to develop new products in the future.

• Journal of International Area Studies (JIAS)
• /
• v.13 no.1
• /
• pp.345-368
• /
• 2009

Our research task have goal to describe a treaty rhetoric known as 『La Rhétorique ou L'Art de Parler』(1688) which corresponds to a very wide field of which the step is not yet dubious in our country. Thus to study the rhetoric of Lamy borrowed from the thought of Descartes, we left the concept d' origin of language in traditional rhetoric in connection with logic and grammar (in first part). Also the second part is devoted to the tropes and the figures that are modified and deteriorated by the language of passion called 'rhetoric of passion or psychological of figure', etc. And the third part interests in the body of the speech being the character of l' heart. Under the influence of the rhetoric of Lamy, French rhetoric at the 17th century is held for an essential text when one interests in the history of the ideas and rhetoric, marked in its specificity (passion). The project of Lamy registered in the concept of passion like 'manners of speaking'. To close this study, which does one have to retain? The first remark to note is that Lamy founds his rhetoric in opposition to traditional designs dating from the beginning of Aristote. Second remark is the idea that one finds based in famous the books of Dumarsais at the 18th century and Fontanier at the 19th century. Admittedly, Lamy is a true rhetorician, grammairien which interests in the question of passions in the speech forces to reconsider the idea spread since Mr. Foucault, and makes it possible to understand the passage of the Great century at the Century of Lumuères. Even if this opinion is not shared, it will be agreed that the work of Lamy on passions or the phenomena sensory and psychological in the center of the language deserves reflexion.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.1
• /
• pp.73-103
• /
• 2008

Over the past few years, "business models" has surged into the management vocabulary. But, while it has become quite fashionable to discuss business models, there has been still much confusion about what are business models and how they could make. In fact, business models can serve a positive and powerful role in corporate management. While other authors have recently offered definitions of "business model", none of them appears to be generally accepted. This paper presents the absence of the generally definition of the business models, elements of business model and classify business logic. To help start-up entrepreneurs better understand, found and check business models thus, this paper propose a method of business model, understanding, founding and checking. The dissertation will present an effective business model building method which is necessary for the start-up entrepreneurs to start business. This paper consists of three parts. first is showing the previous study of business model. The second is the re-definition business model and elements based on the first and to present a new method of business model plating and checking for start-up IT (information technology) company's entrepreneurs. The last is application of the methode. This study applied the methode to a company which is located in "DAEDEOK INNOPOLIS"; this company has specialized Information technology.

• Journal of Korean Philosophical Society
• /
• v.116
• /
• pp.155-180
• /
• 2010

The three means of listening, reflection and meditation (${\acute{s}}raava{\d{n}}a$, manana and $nididhy{\bar{a}}sana$) which are central devices of practice in $Ved{\bar{a}}nta$ philosophy should be understood not as a continuative step but as a methodological extension on condition of having one and the same purpose. In other words, the three means should be interpreted in a listening-oriented manner, in which the process has to be methodologically extended to reflection and meditation only when the direct knowledge on the reality is not gained in listening. This kind of interpretation can be more justified by displaying significant characteristics of Indian philosophy implied in the three means. It can be easily said that $Ved{\bar{a}}nta$ belonging to the liberation-centric tradition is a project of 'regaining essential self' through which the self becomes essential self by knowing that self. In this case the listening-oriented interpretation coincides with the basic teachings of $Ved{\bar{a}}nta$, since listening alone can be a sufficient means for obtaining knowledge of the original self. Further, as the project of 'regaining essential self' is carried out by the three means, these can be called a sort of 'event' that is carried out according to the scenario of $Ved{\bar{a}}ntic$ metaphysics. In this case listening is a course of comprehending the scenario of event participated by oneself, and that participant can accomplish the project by way of listening the scenario alone judged as somewhat more effective for liberation. However, in the later $Ved{\bar{a}}nta$ there arises a meditation-oriented interpretation of which three means are regarded not as a methodological extension but as a continuative step, because of the emphasis on meditation under the lasting influence of other philosophical systems. This is a result of epistemic desire that tries to convert what is heard to what is specially perceived or what is given to what is accepted. It may be said that this interpretation emphasizing the phased transition from the indirect to the direct of knowledge is an attempt to rationalize the repetitive delay of event as the actual failure of project. Furthermore, an assertion of the later $Ved{\bar{a}}nta$ which refers the fourth means called $sam{\bar{a}}dhi$ is based on the logic that the self-realization is possible apart from and outside the text, and accordingly it is incompatible with an assertion of the early $Ved{\bar{a}}nta$ that the self-realization is a reproduction as it is of the scenario guided by the absolute text. After all, the standard interpretation on the three means in $Ved{\bar{a}}nta$ have to be the listening-oriented, but not be the meditation-oriented or the $sam{\bar{a}}dhi$-oriented.