• Archives of Pharmacal Research
• /
• v.21 no.6
• /
• pp.671-676
• /
• 1998

Five hundred and seventy clinical strains of Pseudomonas aeruginosa were isolated from August 1993 to August 1994 in Korea and screened for their resistance to ciprofloxacin, norfloxacin, and ofloxacin. Among these, two P. aeruginosa strains (PA150 and PA300) were selected based on their strong resistance (MICs > 50mcg/ml) to all three quinolones. The susceptible strain as well as two resistant strains had proton gradient-dependent efflux system. Efflux system in PA300 showed different specificities to ofloxacin and ciprofloxacin while PA150 had less permeability for ofloxacin. Ofloxacin had a less inhibitory action on DNA synthesis in permeabilized cells of PA150 and PA300 than 1771M. When quinolone resistance determining region (QRDR) in gyrA was sequenced, PA300 had one missense mutation, Asn 116Tyr, which was newly reported in this work. The results showed that PA150 became ofloxacin resistant by reduced ofloxacin accumulation due to the existence of efflux system and low permeability, while resistance of PA300 was due to the efflux system and a mutation in QRDR of gyrA -the target site of quinolone.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.965-968
• /
• 2011

A 1.485-Gbit/s video signal transmission system at carrier frequencies of 240 GHz and 300 GHz was implemented and demonstrated. The radio frequency front-ends are composed of Schottky barrier diode subharmonic mixers (SHMs), frequency triplers, and diagonal horn antennas for the transmitter and receiver. Amplitude shift keying with an intermediate frequency of 5.94 GHz was utilized as the modulation scheme. A 1.485-Gbit/s video signal with a high-definition serial digital interface format was successfully transmitted over a wireless link distance of 4.2 m and displayed on an HDTV with a transmitted average output power of 20 ${\mu}W$ at a 300-GHz system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.183-187
• /
• 2000

In this paper, the performance of DS-CDMA system and FH-CDMA system has been comparision analyzed in a channel environment which is characterized by Multi-User environment and Rayleigh fading environment. The techniques of improvement of the performance has been comperision analysis evaluated when adopting MRC diversity techniques. In same condition, We are analyzed the BER(Bit Error Rate) as increase Use's number due to comparing performance of two systems by Same communication band(300KHz), jamming signal(JSR) 10∼20dB, user data-rate 300bps. In the result, the performance of DS and FH systems in multiuser and Rayleigh fading environment is improved performance when adopting MRC diversity techniques. Especially DS system has been improved performance about 9.5 times than FH system when adopting MRC diversity techniques.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2011

In this paper, an 1.5Gbit/s wireless data transmission system using the carrier frequency of 300 GHz band was implemented. The RF front-end was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antennas for transmitter and receiver, respectively. The LO frequencies of sub-harmonic mixer are 150GHz for transmit chain and 156GHz for receive chain. The ASK(Amplitude Shift Keying) modulation was used in the transmitter and the envelope detection method was used in the heterodyne receiver. The conversion loss of sub-harmonic mixer and implementation system loss were measured to be 9.8dB and 1.2dB, respectively. The 1.5Gbit/s video signal with HD-SDI format was transmitted over wireless distance of 40cm without optical lens(4.2m with optical lens) and displayed on HDTV at the transmitted average output power of $20{\mu}W$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.819-825
• /
• 2003

The purpose of this study is to develop the speaker recognition system which can select one of operating modes in FES for general paralysis patients. As spiral injury by traffic accident, industrial disaster, or stroke has been increased, the development of FES(Functional Electrical Stimulator) system is urgent to prevent paralysis and atrophy, and to assist the patients walking. For these patients we developed FES system(1). To operate this system one of several operating modes must be selected. As this can not be done by general paralysis patients, an attempt has been tried in this study to select the mode by speaker recognition system. RSC-300 of sensory co. has been chosen as a speaker recognition chip, and PIC16F84 is adapted to interface RSC-300 and FES system.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.49-62
• /
• 1993

The purpose of this research was to utilize of Pattern Design System(P.D.S) by using AM-300 The conclusion were like these : 1. A coat of basic pattern was selected by design sketch. 2. The basic pattern was input into computer by digitizing. 3. The basic pattern was change into designed shape by using various skills. This system were enabled to draw straight lines, curves, delete lines, sections of lines, extend lines, cut pattern into sections, measure line or section reproduce whole pattern shape of section, rotate and mirror pattern and complete patterns. 4. Automatic grading of finished master pattern have been developed by creation and modification of grading rules of basic pattern. 5. Production pattern added seam allowance, not-ches was generated by P.D.S menu option. 6. Finished pattern design was plotted out 100% and 20% size by AM-300 Plotter. This results will be the basic materials to develop the CAD SYSTEM if some problems were improve. Furthermore, the utilization of P.D.S is expected to be developing in pattern making process.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1354-1356
• /
• 2000

This paper deals with a 300kV dc charging system to be used ?s a voltage source in a circuit breaker synthetic short-circuit-test facility. Cockcroft-walton circuit is used to step up the rectified voltage from a single phase transformer of which primary winding is hooked up to an ac220 wall plug. Two systems with the same ratings have been designed and manufactured. The two system have been made of different supporting structure with different insulating materials. The paper describes a couple of charging schemes, system configurations and the synthetic test circuit in which the developed system is to be used.

• International Journal of Advanced Culture Technology
• /
• v.12 no.2
• /
• pp.249-257
• /
• 2024

This study analyzes the current status and prospects of Iran's air defense network, focusing on the Russian-made S-300 system, and derives implications for the development of South Korea's air defense network. Iran's air defense network exhibits strengths such as long-range detection and interception capabilities, multi-target processing, high-altitude interception, and electronic warfare response. However, it also reveals weaknesses, including lack of mobility, difficulty in detecting low-altitude targets, obsolescence, training level of operating personnel, and vulnerability to electronic warfare. Real-world cases confirm these weaknesses, making the system susceptible to enemy evasion tactics, swarm drone attacks, and electronic warfare. Drawing from Iran's case, South Korea should establish a multi-layered defense system, strengthen low-altitude air defense and electronic warfare capabilities, foster the domestic defense industry for technological self-reliance, and enhance international cooperation. By addressing these aspects, South Korea can establish a robust air defense network and firmly protect its national security. Future research should aim to secure and analyze materials from the Iranian perspective for a more objective evaluation of Iran's air defense network and continuously track Iran's efforts to improve its air defense network and the trend of strengthening drone forces to predict changes in the Middle East security situation.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1868-1870
• /
• 2000

As a drive for an ETC (Electro-thermal Chemical) launcher, a large pulse power system of a 2.4MJ energy storage was designed, constructed and tested. The overall power system consists of eight capacitive 300kJ energy storage banks. In this paper we describe the design features, setup and operation test result of the 300kJ pulsed power module. Each capacitor bank of the 300kJ module consists of six 22kV 50kJ capacitors. A triggered vacuum switch (TVS-43) was adopted as the main pulse switch. Crowbar diode circuits, variable multi-tap inductors and energy dumping systems are connected to each high power capacitor bank via bus-bars and coaxial cables. A parallel crowbar diode stack is fabricated in coaxial structure with two series 13.5kV, 60kA avalanche diodes. The main design parameters of the 300kJ module are a maximum current of 180kA and a pulse width of 0.5 - 3ms. The electrical performances of each component and current output variations into resistive loads have been investigated.