• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.429-439
• /
• 2000

This study was aimed to investigate the handle and mechanical properties of silk woven fabrics according to the fabric structure and yarn types 56 male and female students evaluated 16 black specimens with semantic differential scale of 20 hand adjectives. Mechanical parameters such as surface properties, bending properties and compression properties were tested using by KES-FS system. Data were analyzed through factor analysis, pearson correlation coefficient and t-test using PC SAS package. The results were as follows: The hand adjectives were grouped as 4 'surface roughness', 'flexibility', ;sense of thermal', and 'dryness'. 'Surface roughness' was highly sensed at satin fabrics of hard-twist yarn, noil yarn and spun yarn, while it was not at the fabrics of normal satin and twill at all. 'Flexibility' was reverse to 'surface roughness'. Thermal sense was felt highly at satin fabrics of noil-yarn, while low at plain fabrics of normal yarn. 'Dryness' was high at satin fabrics of hard-twist yarn and while it was low at normal satin fabrics. Predicted equations for subjective hand from mechanical properties of fabrics were developed using Stevens's law and stepwise regression and the coefficients of determination were high.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.31-34
• /
• 2004

A new extrusion process of the circular section product with helical fins could be developed by using rotating extrusion dies. The twisting of extruded product is caused by the twisted conical die surface connecting the die entrance section and the die exit section linearly. But, until now, because the process has used fixed extrusion dies, it needs high pressure in order to twist billet and form fin shape on the surface of billet. So, during extruding billet, in order not to twist billet, the extrusion dies is needed to rotate itself instead of twisting billet. And in order to rotate dies, the shape of inside contour of extrusion dies must have conical type with twisted Inclined die surface connecting the die entrance section and the die exit section linearly. The results of experiments show that, in spite of using twisted extrusion dies, twisting of the billet should not happen because of rotating dies in the opposite direction of twisting direction of billet during extruding billet, and, from the results, it shows that it can decrease the power of extrusion pressure and could prevent crack of teeth for fin forming.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.163-175
• /
• 2007

This study examines 74 pieces of textiles of Daegaya found in the Jeesan-dong Tomb and Saeng-cho Tomb, and analyzes their characteristics and weaving techniques. Dagaya is known to have produced ramie and hemp from bast fibers. The hemp textiles were all woven in plain weave, and the ramie textiles were woven either in plain weave or plain braid. The ramie textiles were slightly more dense compared to the hemp textiles, however, both had average densities between 0.92 to 0.93, showing that they are balanced plain weave textiles. It was also found that S twist threads were used in the production of the hemp and ramie textiles. The dyed textiles on iron remains were found to be the oldest textiles to use dying techniques for patterns. Silk textiles were woven in plain weave, twill weave, and leno weave. All of the silk were made with non-twisted thread. The densities were between 30 to 58.3 and the the density rates were 1.0 to 2.5 for plain weave silk, this showed that varieties of plain weaver created by different densities of warp and well. The average density of cho was $53.4{\times}22.5/cm^2$ the density rate was about 2.40, therefore warp was woven more dense compared to the weft. There were degummed and raw silk used in silk textiles, but most of them were found to be degummed thread.

• Fashion & Textile Research Journal
• /
• v.9 no.2
• /
• pp.243-248
• /
• 2007

This study is about the fabric attached to the relics excavated from the Shimchun-ri tomb of the 4th century and the Moonsan-ri tombs of the 5th century. We studied 5 pieces of fabric from the Shimchun-ri tomb: one piece was silk and the other four pieces were hemp. We were able to observe 8 pieces from the four tombs in Moonsan-ri, All of them except one ramie were silk. The two kinds of bast fiber found in the tombs of Shimchun-ri and Moonsan-ri were hemp and ramie, and they were found to be plain woven with S-twist thread which thickness is uneven. The density was more fine compared to the hemps found in the Kaya or Shinra tombs of the similar era. All of the silk textiles found in the Shimchun-ri and Moonsan-ri tombs used non-twisted thread, and were plain woven. Also, we found degummed and raw silk from the tombs. The average density of the silk textiles from these tombs are similar to other areas of the same time, and studies show that they used non-twisted thread in plain woven silk found in other tombs. Therefore, we can conclude that they usually used non-twisted thread when producing silk textiles.

• Structural Engineering and Mechanics
• /
• v.37 no.3
• /
• pp.297-307
• /
• 2011

Meck Plot is an adapted version of the well-known Southwell method to the case of lateral-torsional buckling, which indeed reflects the physical inter-dependence of lateral flexure (lateral displacement) and torsion (rotation) in the structure. In the recent reported studies, it has been shown experimentally and theoretically that lateral displacement of an I-beam undergoing elastic lateral-distortional mode of buckling is interestingly directly coupled with other various deformation characteristics such as web transverse strain, web longitudinal strain, vertical deflection, and angles of twist of top and bottom flanges, and consequently good results have been obtained as a result of application of the Meck's method on lateral displacement together with each of the aforementioned deformation variables. In this paper, it is demonstrated that even web transverse and longitudinal strains, vertical deflection, and angles of twist of top and bottom flanges of an I-beam undergoing elastic lateral-distortional buckling are two-by-two directly coupled and the application of the Meck Plot on each pair of these deformation variables may still yield reliable predictions for the critical buckling load.

• Advances in materials Research
• /
• v.11 no.4
• /
• pp.375-390
• /
• 2022

Carbon Fiber Reinforced Polymer (CFRP) composite provides outstanding mechanical capabilities and is therefore popular in the automotive and aerospace industries. Drilling is a common final production technique for composite laminates however, drilling high-strength composite laminates is extremely complex and challenging. The delamination of composites during the drilling at the entry and exit of the hole has a severe impact on the results of the holes surface and the material properties. The major goal of this research is to investigate contemporary industry solutions for drilling CFRP composites: enhanced edge geometries of cutting tools. This study examined the occurrence of delamination at the entry and exit of the hole during the drilling. For each of the 80°, 90°, and 118°point angle uncoated Brad point, Dagger, and Twist solid carbide drills, Taguchi design of experiments were undertaken. Cutting parameters included three variable cutting speeds (100-125-150 m/min) and feed rates (0.1-0.2-0.3 mm/rev). Brad point drills induced less delamination than dagger and twist drills, according to the research, and the best cutting parameters were found to be a combination of maximum cutting speed, minimum feed rate, and low drill point angle (V:150 m/min, f: 0.1 mm/rev, θ: 80°). The feed rate was determined to be the most efficient factor in preventing hole entry and exit delamination using analysis of variance (ANOVA). Regression analysis was used to create first-degree mathematical models for each cutting tool's entrance and exit delamination components. The results of optimization, mathematical modelling, and experimental tests are thought to be reasonably coherent based on the information obtained.

• Journal of the Korean Society of Costume
• /
• v.58 no.10
• /
• pp.164-172
• /
• 2008

Soochonri tombs are assumed to be of the Baekje Kingdom in the early 5th century. We have examined 12 artifacts and 24 textiles in the four tombs. Along with hemp textiles, silk and embroidery threads were found In the Soochonri tombs. Within the hemp textiles both hemp and ramie were made using s-twist threads and the thread count distribution is calculated to be $8.5{\sim}15.5/cm^2$. Taffeta, one of the silk, can be categorized in to four types. First, the plain woven silk was made with warp and weft of the same thickness. The rates of thread count are also similar. Secondly the warp and weft are of the same thickness but has more spaces between threads. Third, the type of warp and weft is different in thickness, the thicker thread woven in the same direction. Lastly, a textile was woven with spaces the same as the width of the reed mark in every two warps. There were five compound weave found. Among them one was made with non-twisted thread for warp and s-twist thread for weft. One plain braiding with apparent spaces between threads were found. All three of the twining were made with wefts thicker than warps, barely showing the warps as a result. Textiles of the Soochonri tombs are the oldest of the Baekje Kingdom studied by far and therefore important artifacts of the Baekje Kingdom. These textiles are similar to those found in the King Muryeong's Tomb and tombs of Gaya and Shilla.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.203-210
• /
• 2017

In this paper, we propose a electrical/mechanical method to effectively diagnose the local deterioration of a 10m long power shielded twist pair cable defined by the American Wire Gauge (AWG) 14 specification using electrical/mechanical methods. The rapid deterioration of the cable proceeded by using the heating furnace, which is based on the Arrhenius equations proceeds from 0 to 35 years with the deteriorated equivalent model. In this paper, we introduce a method to diagnose the characteristics of locally deteriorated cable by using $S_{21}$ phase and frequency change rate measured by vector network analyzer which is the electrical diagnostic method. The measured $S_{21}$ phase and rate of change of frequency show a constant correlation with the number of years of locally deteriorated cable, thus it can be useful for diagnosing deteriorated cables. The change of modulus due to deterioration was measured by a modulus measuring device, which is defined by the ratio of deformation from the force externally applied to the cable, and the rate of modulus change also shows a constant correlation with the number of years of locally deteriorated cable. Finally, By combining the advantages of electrical/mechanical diagnostic methods, we can efficiently diagnose the local deterioration in the power shielded cable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.80-80
• /
• 2002