• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2002

Path setup considering QoS is one of the main problems to solve in Internet traffic engineering. In network restoration that is one of the traffic engineering components, to establish a backup path or backup path for a working path to be protected is the main task. The backup path should have enough bandwidth to guarantee the working paths. Thus this work requires the QoS routing solution that is to set up a backup path as well as a working path at the same time provisioning enough bandwidth. In this paper, we propose an algorithm to setup a backup path that shares the bandwidth of other backup paths whose working path does not pass along the same link with the working path we are considering. In this way we can reduce much bandwidth consumption caused by setting up backup paths. We also analyze the disjoint path computation algorithms. Finally we show simulation results how the algorithm can reduce the bandwidth consumption and how it will affect blocking when we setup paths.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.18-24
• /
• 2003

The resonator using two layer microstrip structure was proposed and the bandpass filter was designed using this resonator in this paper. The proposed resonator structure is constructed by placing a U-shape of resonator in the first layer and then placing a broadside coupling strip in the second layer just above of the U-shape of resonator's edge part. Because these structure has various design parameters than general single layer coupled line structure, filter design is more flexible. In this paper, the narrow band filter was designed using multi-layer structure that had been applied to broadband filter because it's high coupling nature. The filter was designed to have 4MHz center frequency and 3 % fractional bandwidth, and finally confirmed that can be realizable narrow band filter by using multi-layer structure through fabrication and measurement.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.213-217
• /
• 2014

In this paper, we designed monopole microstrip antenna for WLAN/WiMAX system. The monopole antenna is designed by FR-4 substrate with size is $30mm{\times}40mm$. The proposed antenna is based on a planar monopole design which cover WLAN and WiMAX frequency bands. To obtain the optimized parameters, we used the simulator, CST's Microwave Studio Program and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is designed. Thus the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.119-125
• /
• 2007

In this paper, a multi-band folded planar monopole internal antenna for mobile handset applications is proposed. The proposed antenna has multi-resonances, which is different from a conventional folded monopole antenna, and it provides a wide bandwidth at high frequency bands. The measured impedance bandwidth (VSWR < 3) is 180 MHz and 1880 MHz in lower and higher frequency bands, respectively. The proposed antenna can effectively cover most wireless communication bands including CDMA, GSM, GPS, DCS, PCS, and W-CDMA, WiBro and S-DMB.

• Journal of Korean Elementary Science Education
• /
• v.34 no.1
• /
• pp.131-141
• /
• 2015

본 연구에서는 과학 영재와 일반아의 창의적 추리과정시 나타나는 두뇌사고 패턴을 sLORETA 분석 기법을 통해 분석하고, 신경생리적 특성을 파악하여 과학 영재아 판별의 기초와 활용 가능성을 알아보는 것이다. 본 연구를 위한 대상자는 과학영재아 6명과 동일 학군 및 학년에 속한 일반아 6명으로 총 12명의 오른손잡이로 하였다. 창의적 추리과정을 위해 사용된 과제는 레이븐 도형점진행렬검사를 사용하였고, 안정상태와 과제 수행간 뇌파를 측정하였다. 뇌파는 19개의 전극을 통해 수집된 16초간의 데이터를 통해 분석하였으며, sLORETA 분석 기법을 통해 8개의 주파수 대역(Delta, Theta, Alpha-1/2, Beta-1/2, Gamma, Omega)에 대한 평균 전류밀도값을 그룹별로 비교하였다. 그룹간 두뇌 활성 주파수 대역을 비교한 결과 눈감고 안정 상태에서 과학영재아가 일반아에 비해 알파-2 대역에서, 레이븐 과제 수행시 과학 영재아가 일반아에 비해 알파-1과 감마 대역에서 강한 활성이 관찰되었다. 연구 결과 나타난 알파 및 감마 대역 활성과 우반구로의 기능적 편측화(Lateralization)는 창의적 문제 해결시 영재아에게 나타나는 대표적 특성 중 하나이며, 배외측전전두피질(DLPFC)의 활성은 과학영재아의 높은 유동지능을 반영하는 결과라 볼 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.101-104
• /
• 2009

이 연구는 Ka대역 위성 HDTV 방송 서비스를 제공하기 위해 강우강도에 따른 전송방안을 제안하였다. Ka대역은 Ku대역에 비하여 강우에 취약하기 때문에 이를 안정적으로 활용하기 위해서는 강우감쇠를 효과적으로 경감시키는 기술개발이 필수적이다. 유럽위성방송 표준인 DVB-S2에서는 강우감쇠에 대한 대처방안으로 채널상황에 따라 여러 변조방식과 채널 부호 율을 이용하는 적응형 변복조 방식을 지원하고 있으며, 이 논문에서는 DVB-S2기반의 전송방식과 Ka대역 중계기의 규격을 적용하여 강우강도에 따른 전송방안을 제안하였다. 이를 위하여 ITU-R P.618-9 강우감쇠 추정 모델과 기상청에서 측정한 1998년부터 2007년까지의 최근 10년간 국내 주요지역의 30분 누적강우량을 이용하여 지역별 강우 감쇠값을 도출하였고 강우강도와 시간 율 관계분석을 통하여 강우강도에 따른 강우감쇠 값을 획득하였다. 획득한 강우감쇠 값을 무궁화 위성 3호의 링크 설계에 적용하여 강우강도에 따른 적용 가능한 전송방안을 도출하였다. 이 연구를 바탕으로 강우의 지역적 편이가 높은 우리나라의 강우 특성을 유연하게 반영하여 각 지역에 맞는 적응적인 전송 방식을 고려할 수 있다.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.901-906
• /
• 2005

In this paper, we propose a novel MHCOC (Mapped High Capacity Orthogonal Code) SS(Spread Spectrum) technique that reduces high PAPR (Peak power to Average Power Ratio) of HCOC SS system which was proposed to support high data rate transmission, and we compare to the conventional modulation technique such as MQAM SS that can transmit the same number of symbols at the same time. Moreover, we study on adaptation of this system to satisfy QoS (Quality of Service) that services the proper data rate according to the propagation channel quality information. We perform computer simulation to verify the performance of the proposed system and analyze its availability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.24-36
• /
• 2002

It is important to use frequency resource effectively to support much more users, to maximize the DS-CDMA system performance. In this paper, we use MPSK, QAM, MFSK and PR coder as a baseband modulation method for DS-CDMA system. Increasing user's number, we compare the performance of each system using different baseband modulation method, by expecting BER performance. BPSK has generally good performance, in case of low power operation of terminal 8FSK has excellent performance relatively, PR has excellent performance when high power operation of terminal and also good for situation of excessive user's number. QAM is not suitable for DS-CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.547-552
• /
• 2007

IEEE ratified IEEE802.3ah as the standard of E-PON, while it leaved the specific method of upstream bandwidth allocation as a role of implementation vendors. Many experts have researched the method of enhancing upstream bandwidth throughput and released related papers. This paper presents another novel mechanism to enhance upstream throughput. This mechanism performs the management of upstream queues by giving the minimum bandwidth of different level to each queue. In order to process packets on each queue we adopted a modified weighted DRR technology. By doing so, the transmission throughput of upstream packets can be largely enhanced. The experimental simulation of this mechanism showed an enhancement of bandwidth utilization more than 10% in comparison to legacy method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.553-558
• /
• 2011

This paper describes the development and test result of S-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels, S-band for Telemetry & Command and X-band for mission data. S-band Transmitter(STX) functionally made of modulator, frequency synthesizer, power amp and DC/DC converter. The transmission data is modulated by FSK(Frequency Shift Keying) and the interface between spacecraft sub-module and STX is RS-422 standard method. The FM STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under $1{\times}10^{-5}$ which meets the specification respectively. The FM STX is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.