• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.330-338
• /
• 2011

BACKGROUND: This study was conducted to investigate the agricultural product (Pulses, Lettuces, Pumpkins, Apples, Pears and Tangerines) in Korea, monitoring of cadmium (Cd) and lead (Pb) contaminations of agricultural products in cultivated areas and abandoned mine areas were investigated, and risk assessment was performed through dietary intake of agricultural products. METHODS AND RESULTS: The average contents of Cd and Pb ranged from 0.001 to 0.018 mg/kg and from 0.007 to 0.032 mg/kg respectively. The result was showed that contents of Cd and Pb did not exceed maximum residual levels established by CODEX except pumpkins and apples. The average daily intake were in the range of $1.06{\times}10^{-3}$ to $4.76{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Cd, $4.53{\times}10^{-3}$ to $8.35{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Pb for general population, based on the Korean public nutrition report 2008. The Hazard Index (HI) from the ratio analysis between daily exposure and safety level values was smaller than 1.0. CONCLUSION(s): This results demonstrated that human exposure to Cd and Pb through dietary intake of agricultural produces from abandoned mine areas might not cause adverse effect exceeding to those from non-contaminated areas.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.1-6
• /
• 2003

In this study, it reviewed about evacuation performance of a specified Office Building. assessment tools is FAST 3.1.7 (Estimation of Flash Over, Estimation of Layer Height Down Flow Time), SIMULEX 32-bit (Estimation of Evacuation Time), JASMINE 3.25d. (Smoke Flow Assessment of a specified time) Result from Fire Scenario # 1, Flash Over is not generated in Compartment. Evacuation Time is estimated 25.2 sec by SIMULEX 32-bit. layer height until this time (25.2 sec) was estimated 2.4 m by FAST 3.1.7. After ignition until this time (25.2 sec), smoke was not release to the a corridor. In consequence, We concluded that people in building are completing the safe evacuation without the damage of smoke. Result from Fire Scenario # 1, Flash Over generated 6 min 33.2 sec in Compartment. Evacuation Time is estimated 1 min 25.5 sec by SIMULEX 32-bit. layer height down flow time is 1 min 40.8 sec by FAST 3.1.7 and 5 min 23 sec by theoretical calculation. Also, total building evacuation time was estimated 2 min 26.6 sec. After ignition until this time (2 min 26.6 sec), smoke released to the a corridor but it amount was few little. Therefore, generated smoke in compartment not effected to the people in buildings.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2008.04a
• /
• pp.69-75
• /
• 2008

기포반응도는 월성발전소를 비롯한 CANDU형 원자로의 주된 안전성 쟁점사안으로 끊임없이 논의되어 왔다. 이는 설계기준사고가 노심에서 열에너지 불균형이 원인이 되어 기준이상의 핵연료 파손과 방사성물질 누출로 발전할 위험이 있는 사건들로 정의될 때, 사건 진행 과정에 기포반응도 증가는 조기에 운전중단을 실패할 경우 출력폭주로 이어지므로 사건의 결말이 중대사고로 전환될 위험이 크기 때문이다. 본 연구는 공개된 최신 핵자료인 ENDF/B-VII.0를 NJOY.99로 처리한 연속에너지 반응단면적 라이브러리를 구축하고 MCNP-4C에 접속하여 37봉 천연우라늄 핵연료다발의 표준노심격자에 대한 기포반응도를 시뮬레이션하여, 지금까지 각종문헌에 제시된 값들과 비교, 종합하므로 내제된 불확실성을 추정하는 내용이다. ENDF/B-VII.0 기반 MCNP-4C의 CANDU 노심격자 모델은 동일한 핵자료와 핵종농도를 사용한 WIMS-IAEA 모델과 비교할 때, 초기 노심의 임계도 오차 약 3.51mk가 연소 진행에 따라 $7.5\times10^{-4}mk$/MWD/teU의 비율로 감소하는 것으로 나타났다. 또한 MCNP-4C 예측기포반응도는 초기노심에서 기포율 50% 및 100%에 대해 각각 8.38 및 15.96mk, 평형노심에서 7.68 및 14.72mk로 계산된다. 이는 월성 2, 3, 4 FSAR의 초기노심 및 평형노심에서 100% 기포상태에 대한 값, 약15.0 및 10.6mk와 비교할 때, 초기노심은 약 1.0mk 평형노심은 약4, 1mk 보수적이지만, 다른 연구결과들과는 최대오차 ${\pm}1{\sim}2mk$ 이내에서 잘 일치하는 것으로 평가되었다. 본 연구는 CANDU 노심의 기포반응도 불확실성 요인의 규명 및 영향평가를 위한 노력의 일부로서 앞으로 감속재의 붕산농도 변화, 감속재 및 냉각재의 중수 순도 변화, 기기노화에 의한 격자 구조 및 물성 변화, 중성자속 및 출력 분포 불균형, 반응도조절장치의 위치, 등 주요 설계변수의 변화에 대한 반응도영향 분석연구를 계속할 계획이다.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.285-293
• /
• 1994

The transport of radionuclides in a compacted bentonite is dominated by diffusion. Through-diffusion tests for iodide were performed to investigate the diffusion characteristics of anionic radionuclides in a domestic bentonite. The bentonite used was sampled from the southeastern area of Korea and the solution was synthetic groundwater spiked with a tracer of I -125(as Na$^{125}$ I). The dry densities of compacted bentonite were 1.2, 1.4, and 1.7 Mg/㎥. The apparent diffusion coefficients and the effective diffusion coefficients of the iodide decrease with increasing dry density. The values were from 3.80 to 7.12$\times$10$^{-11}$ $m^2$/s for the apparent diffusion coefficients and from 1.25 to 7.97$\times$10$^{-12}$ $m^2$/s for the effective diffusion coefficient, respectively. The experimental results also showed that the apparent diffusion coefficients depended on the pore structure of compacted bentonite and the effective diffusion coefficients were attributed to the pore structure and the effective porosity that represents the available pathway for the diffusional transport of iodide. The results obtained will be used as basic data for the safety assessment of a repository.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.141-145
• /
• 2014

To assess the health risk for benzo(a)pyrene by the intake of edible oils, 288 cases of edible oils collected from food markets were analysed using the high performance liquid chromatography with fluorescence detector. The levels of benzo(a)pyrene were from non-detection to $4.78{\mu}g/kg$, and the average was $0.11{\mu}g/kg$. The chronic daily exposures of benzo(a)pyrene for total population group and consumer-only group were estimated using the food consumption data in the fifth Korea National Health and Nutrition Examination Survey in 2011. The estimated daily intake of benzo(a)pyrene was $4.26{\times}10^{-3}ng/kg$ b.w./day for total population group and $7.64{\times}10^{-3}ng/kg$ b.w./day for consumer-only group. The MOE (margin of exposure) of benzo(a)pyrene for total population group and consumer-only group was $7.28{\times}10^7{\sim}1.74{\times}10^8$ and $3.95{\times}10^7{\sim}9.42{\times}10^7$, respectively. Accordingly, the health risk from benzo(a)pyrene caused by the intake of edible oils was considered as a very low level.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.9-19
• /
• 2019

Experiments on the combustion characteristics of untreated wood specimens and those treated with four types of silicone compounds were carried out using a cone calorimeter according to the ISO 5660-1 standard. 3-Aminopropyltrimethoxysilane (APTMS), 3-(2-aminoethylamino) propylmethyldimethoxysilane (AEAPMDMS), and 3-(2-aminoethylamino) propyltrimethoxysilane (AEAPTMS) were used as the silane compounds. The flame retardants were synthesized with sodium silicate and amino silane compounds. The measured time to ignition after combustion at an external heat flux of $50kW/m^2$ was 9 s to 11 s. Time to ignition was marked with a delayed value in the 3 s to 5 s range. The peak heat release rate ($HRR_{peak}$) was reduced by 5 to 20% compared with the uncoated specimen, and AEAPMDMS showed the highest initial fire risk. The total heat release (THR) was decreased by 1 to 22%. Compared to the untreated specimen, the fire performance index (FPI) of the specimens coated with silicone sol compounds increased by 1.5 to 2.2 fold. The fire growth index (FGI) of the AEAPMDMS specimen was increased by 30% and the others were decreased by 93 to 94%. Therefore, the fire risk of wood coated with silicone compounds was improved in terms of the heat risk properties.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.438-444
• /
• 2018

Korea has recently selected twenty-two ports for reinforcement breakwater installation of protection facilities, due to rise sea level caused by global warming and increase in the number of typhoon and tsunami. In addition, due to consistent enlargement of ship size, dredging for depth of water for large vessel's berthing and enlargement of berth is under construction. However, no definite construction plan for the reinforcement and lengthening of crown height, which has close relationship with the safe mooring of ships. In this study, domestic and foreign design criteria of crown height were analyzed, and the crown height evaluation index and evaluation method were developed by dividing it into environment and ship elements. In particular, in the case of ship evaluation index, each step was set up in 4 steps according to domestic and foreign regulations, weighted by each step, and the safety level of crown height was evaluated. As a result of the mooring safety simulation of the 100,000 ton cruise ship, the appropriate minimum crown height standard was derived to be 3 m above A.H.H.W. The results of this study are expected to be used as basic data to propose the crown height standard reflecting ship characteristics.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.151-159
• /
• 2012

The potential repository domains for A-KRS (Advanced Korean Reference Disposal System for High Level Wastes) in geological characteristics of KURT (KAERI Underground Research Tunnel) facility site were proposed to develop a repository system design and to perform the safety assessment. The host rock of KURT facility site is one of major Mesozoic plutonic rocks in Korean peninsula, two-mica granite, which was influenced by hydrothermal alteration. The topographical features control the flow lines of surface and groundwater toward south-easterly and all waters discharge to Geum River. Fracture zones distributed in study site are classified into order 2 magnitude and their dominant orientations are N-S and E-W strike. From the geological features and fracture zones, the potential repository domains for A-KRS were determined spatially based on the following conditions: (1) fracture zone must not cross the repository; and (2) the repository must stay away from the fracture zones greater than 50 m. The western region of the fracture zones in the N-S direction with a depth below 200 m from the surface was sufficient for A-KRS repository. Because most of the fracture zones in N-S direction were inclined toward the east, we expected to find a homogeneous rock mass in the western region rather than in the eastern region. The lower left domain of potential domains has more suitable geological and hydrogeological conditions for A-KRS repository.

• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.809-824
• /
• 2017

The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.4-7
• /
• 2009

Agricultural soils contaminated by cadmium (Cd) are common problems in Asia due to rapid industrial development, so the risks of Cd exposure from food crops consumption are concerned by public and authorities. The latest data on Cd concentration in plant-based food and the dietary intakes of Cd around the world are presented in this review. In general, Cd concentrations in major plant-based commodities seldom exceed 0.05 mg/kg fresh weight and decline in the order as: cereals > pulses > vegetables > roots and tubers > fruits in Far Eastern region. In Middle Eastern and European regions, the order is vegetables > cereals > roots and tubers > pulses > fruits. Rice has the highest Cd levels among cereals in Asian countries, but in Middle Eastern and European region the highest level of Cd occurred in leaf vegetables. The dietary intakes of Cd from plant-based commodities around the world declined in the order as: cereals > vegetables > roots and tubers > fruits > pulses. Rice is the largest contributor to total dietary Cd intake (58%) in the Far Eastern region and contributed 36% of Provisional Tolerable Daily Intake (PTDI). For high foodstuffs consumers, intake of Cd from all diets may exceed PTWI, especially for high rice consumers in Asian countries. The World Health Organization (WHO) conducted impact assessment of different maximum levels (MLs) of Cd and demonstrated that each of the four possible MLs for rice had little impact on dietary Cd intake. Since many Cd-contaminated soils in Asian countries still producing crops due to the growing population, the cost-effective techniques for reducing Cd contents in crops especially rice grain are absolutely required.