• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.373-385
• /
• 2009

The purpose of this paper is to study shear locking-free parametric earthquake analysis of thick and thin plates using Mindlin's theory, to determine the effects of the thickness/span ratio, the aspect ratio and the boundary conditions on the linear responses of thick and thin plates subjected to earthquake excitations. In the analysis, finite element method is used for spatial integration and the Newmark-${\beta}$ method is used for the time integration. Finite element formulation of the equations of the thick plate theory is derived by using higher order displacement shape functions. A computer program using finite element method is coded in C++ to analyze the plates clamped or simply supported along all four edges. In the analysis, 17-noded finite element is used. Graphs are presented that should help engineers in the design of thick plates subjected to earthquake excitations. It is concluded that 17-noded finite element can be effectively used in the earthquake analysis of thick and thin plates. It is also concluded that, in general, the changes in the thickness/span ratio are more effective on the maximum responses considered in this study than the changes in the aspect ratio.

• Structural Engineering and Mechanics
• /
• 제30권3호
• /
• pp.351-368
• /
• 2008

The purpose of this paper is to propose a simple analysis method of axial deformation of base-isolation rubber bearings in a building subjected to earthquake loading and present its applicability to the analysis of the bound of the aspect ratio of base-isolated buildings. The base shear coefficient is introduced as a key parameter for the bound analysis. The bound of the aspect ratio of base-isolated buildings is analyzed based on the relationship of the following four quantities; (i) ultimate state of the tensile stress of rubber bearings based on a proposed simple recursive analysis for seismic loading, (ii) ultimate state of drift of the base-isolation story for seismic loading, (iii) ultimate state of the axial compressive stress of rubber bearings under dead loads, (iv) prediction of the overturning moment at the base for seismic loading. In particular, a new recursive analysis method of axial deformation of rubber bearings is presented taking into account the nonlinear tensile behavior of rubber bearings and it is shown that the relaxation of the constraint on the ultimate state of the tensile stress of rubber bearings increases the limiting aspect ratio.

• 소성∙가공
• /
• 제16권1호
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4242-4250
• /
• 1976

The determination of the pre-consolidation load known to have a great effect on the consolidation characteristics of the soil have been researched and discussed in detail by many other researchers. A study was undertaken to investigate and compare the effect of pre-consolidation loads on the coefficient of permeability and the consolidation characterisics of soil through the consolidation test on the three types of soil samples. The results of this study are follows; 1. Large compression index is dependent on initial void ratio of the sample being used and the pressure-void ratio curve shows a curved linear relationship in over-consolidated area but a linear relationship in normally consolidated area.2. Settlement-time curve is S-shaped where the pressure is larger than pre-consolidation load and regardless of over-burden pressure, it is a similar straight line respectively in the secondary consolidation area. 3. Primary consolidation ratio of the sample increases almost linearly with the increase of over-burden pressure but the coefficient of volume compressibility decreases linearly with the increase of it. 4. Time factor of a certain degree of consolidation increases with over-burden pressure but the coefficient of consolidation decreases with it in over-consolidated area. There is a linear relationship between them in normally consolidated area. 5. The void ratio of completion point of primary consolidation decreases linearly with over-burden pressure. 6. The coefficient of permeability of sample decreases linearly with over-burden pressure in normally consolidated area, also it increases linearly with increment of the void ratio of the sample.

• 한국식품과학회지
• /
• 제21권5호
• /
• pp.613-618
• /
• 1989

한국산 미곡 통일계 및 일반계 품종들의 미질특성을 구명하기 위하여 1985년에 3개 작물시험장(수원작물시험장, 영남작물시험장 및 호남작물시험장)에서 생산된 통일계 13품종과 일반계 10품종을 재료로 하여 백미의 취반특성 및 밥의 texture 특성을 조사하였다. 취반특성 중 흡수율 및 취반시 사용한 용액 중 용출고형물은 각각 $p<2.172^*$ 및 $p<2.419^*$로 계통간에 유의차를 보였는데 흡수율은 일반계가 통일계보다 높았으며, 용출고형물은 통일계가 일반계보다 높았다. 밥의 texture 특성에서 hardness와 cohesiveness는 $p<4.370^{***}$ 및 $p<2.371^*$로 계통간에 유의성이 인정되었으며, hardness는 일반계가, cohesiveness는 통일계가 높았다. Amylose 함량과 adhesiveness 사이에는 통일계에서 $r=-0.922^{**}$ 일반계에서 $r=-0.915^{**}$으로 역상관을 이루었으며, 단백질 함량과 hardness 사이에는 통일계에서 $r=0.954^{**}$, 일반계에서 $r=0.915^{**}$로 정상관을 이루었다.

• 한국수산과학회지
• /
• 제30권3호
• /
• pp.442-450
• /
• 1997

본 연구는 부경대학교 해양탐사선인 탐양호를 이용하여 1995년 2월 14일에서 17일까지 실시하였다 수온, 염분 및 용존산소를 이용한 T-S diagram 및 $T-O_2$ diagram 으로부터 수괴는 5개의 Type으로 구분되었다. 특히 T-S diagram에서는 잘 구분되지 않았던 Type IV와 Type V는 $T-O_2$ diagram에서 뚜렷이 구분되었다. 하지만 기존 수괴와 명확히 일치하지 않는 것은 본 조사가 동계에 실시되어 표층수온의 감소로 인하여 수괴의 수직혼합이 강하게 일어나서 생긴 현상으로 사료된다. 영양염류의 수괴별 농도분포를 보면, Type I, Type II, Type III은 서로 거의 비슷한 농도를 보였지만 Type IV에서 Type V로 갈수록 증가되었다. 그리고 동일 수괴에서 농도범위가 넓게 나왔는데, 이는 수온약층의 약화로 인하여 발생한 것으로 생각된다. N/P ratio은 모든 water type에서 Redfield ratio 이하로 나타났는데, 이것은 질산염이 식물플랑크톤 성장의 제한인자로 작용하고 있음을 보여주고 있다. chlorophyll $\alpha$의 농도는 $0\~8\;{\mu}g/\ell$의 범위로, Type I에서 최대였고 Type IV와 Type V에서는 거의 검출되지 않았다. 입자성 유기탄소와 유기질소의 농도는 각각 $0.49\~20.03\;{\mu}g-at/\ell$와 $0.09\~5.34\;{\mu}g-at/\ell$ 범위로서, 수심의 증가에 따라 그 농도가 감소하고, 연안에서 외양쪽으로 갈수록 낮아지는 경향이었다. Water type별 농도는 Type I > Type II > Type III > Type IV > Type V의 순서로 수심의 증가에 따라 농도가 증가하는 경향이었다. 즉 이들 입자성 유기물질은 수괴별로 어떤 뚜렷한 경향을 보이지는 않았으며, 수심에 따라서 농도가 변화되는 것으로 생각된다. POC/PON의 원자비는 3.23으로 Redfield ratio 이하로 나타났다. 이것은 POC보다 PON이 더 난분해성이라 침강하는 동안 POC는 분해되지만 수직혼합에 의해 PON은 다시 재부유하기 때문인 것으로 사료된다. POC/chlorophyll $\alpha$의 평균값은 1962로 매우 높은 값을 나타내었으며, non-living detritus가 POC의 대부분을 차지하고 있는 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.39-47
• /
• 2010

Galvanic coupling between GECM(graphite epoxy composite material) and metallic materials can facilitate corrosion of metals and alloys because GECM is noble and electrically conductive. Galvanic corrosion is affected by many factors including metallic materials, area ratio, surface condition, and corrosivity. This work aims to evaluate the effect of area ratio on galvanic corrosion between GECM and several metals. In the case of glavanic coupling of carbon steel and Al to GECM, corrosion rate increased with increasing area ratio. Corrosion rate of sensitized STS 316S stainless steel decreased a little at an area ratio 1:1 but increased at an area ratio 30:1. It is considered to be due to that area ratio affects galvanic corrosion more in less corrosion resistant alloys. However, in case of STS 316 and Ti, galvanic coupling reduces corrosion rate by the formation of passive film.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.250-261
• /
• 1995

In this study, a rapid compression and expansion machine(RCEM) equipped with a swirl generator was designed and developed, in order to clarify normal and abnormal combustion(knocking phenomena). This RCEM is intended to simulate combustion process in actual automotive S.I.engines, having a high reproducibility in the compression stroke. Flame propagation and autoignition processes associated with normal and abnormal combustion were captured by the high speed schlieren photography. And swirl intensity. equivalence ratio and ignition position were varied to investigate the effect of turbulence, concentration in the unburnt gas region and flame propagation length. The knock intensity, knock mass fraction and knock mass fraction after autoignition were calculated by use of history of measured cylinder pressure.

• KDI Journal of Economic Policy
• /
• 제44권3호
• /
• pp.75-99
• /
• 2022

This paper analyzes job creation when the Korean economy transitioned to a knowledge economy from the 1990s to the 2010s. During this period, the ratio of service to manufacturing jobs increased, knowledge intensive industries grew, and job creation became geographically concentrated around Seoul. The changes slowed down in the 2010s, and overall job growth weakened. To analyze the effect of job creation driver industries during this period, the main part of which are knowledge intensive tradable service industries, on local service job creation, I use a modified version of the local labor market of Moretti (2010). I analyze the job changes during 1995-2005 and during 2006-2016 in 237 Si-Gun-Gu areas in the Census on Establishments datasets. I find that one manufacturing job creates 0.5 local service jobs and that one tradable service job creates 1.1 jobs within Gu areas of metro cities and 2.3 jobs in Si-Gun areas. The job creation relationship between the tradable and local service sectors was not altered in this period. As more jobs were created in the tradable sector driven by the transition to a knowledge economy, job creation overall remained active, with the opposite also being true.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1978년도 추계학술대회
• /
• pp.206.4-206
• /
• 1978

By utilizillg whole cell enzyme of the Xantho-monas citri IFO 3835, cephalexin is synthesized directly from 7-amino-deacetoxy cephalosporanic acid (7-ADCA) and phenyl glycine methyl ester (PGM). To date, cephalexin has been manufactu-red by chemical process involving fairly large number of steps to protect the amino group of phenly glycine and carboxyl group of 7-ADCA. However, the enzymatic process involves only a single step with 85％ conversion in 90 minutes. The fermentation variables studied indicate that oxygen transfer is limiting step in the enzyme production. Optimum conditions for enzymatic reaction were 37 C, pH 6.0, and the optimum substrate molar ratio of PGM to 7-ADCA was 2. Other variables that are related to the biochemical properties of whole cell enzyme temperature stability, pH stability, kinetic constants, reusing effect, enzyme loading effect were also evaluated.