• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1570-1578
• /
• 2022

During a severe accident, steam generator (SG) tubes undergo rapid changes in the pressure and temperature. Therefore, an appropriate creep model to predict a short term creep damage is essential. In this paper, a novel creep model for Alloy 690 SG tube material was proposed. It is based on the theta (θ) projection method that can represent all three stages of the creep process. The original θ projection method poses a limitation owing to its inability to represent experimental creep curves for SG tube materials for a large strain rate in the tertiary creep region. Therefore, a new modified θ projection method is proposed; subsequently, a master curve for Alloy 690 SG material is also proposed to optimize the creep model parameters, θ_i (i = 1-5). To adapt the implicit creep scheme to the finite element code, a partial derivative of incremental creep with respect to the stress is necessary. Accordingly, creep model parameters with a strictly linear relationship with the stress and temperature were proposed. The effectiveness of the model was validated using a commercial finite element analysis software. The creep model can be applied to evaluate the creep rupture behavior of SG tubes in nuclear power plants.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.364-374
• /
• 1980

Twenty-two patients were selected for evaluation of pre-and postoperative pulmonary function. These patients were performed open cardiac surgery with the extracorporeal circulation from March 1979 to July 1980 at the Department of Thoracic and Cardiovascular Surgery, Kyungbook National University Hospital. Patients were classified with ventricular septal defect 5 cases, atrial septal defect 5 cases, tetralogy of Fallot 5 cases, mitral stenosis 4 cases, rupture of aneurysm of sinus Valsalva 1 case, left atrial myxoma I case, and aortic insufficiency 1 case. The pulmonary function tests were performed and listed: [1] respiratory rate, tidal volume [TV], and minute volume[MV], [2] forced vital capacity [FVC] and forced expiratory volume[FEV 0.5 & FEV 1.0], [3] forced expiratory flow [FEF 200-1200 ml & FEF 25-75%]. [4] Maximal voluntary ventilation [MVV], [5] residual volume [RV] and functional residual capacity[FRC], measured by a helium dilution technique. Respiratory rate increased during the early postoperative days and tidal volume decreased significantly. These values returned to the preoperative levels after postoperative 5-6 days. Minute volume decreased slightly, but essentially unchanged. Preoperative mean values of the forced vital capacity, functional residual capacity and total lung capacity decreased [63.2%, 87.2% & 77.3% predicted, respectively], and early postoperatively these values decreased further [19.6%, 76.0% & 38.0% predicted], but later progressively increased to the preoperative levels. In residual volume, there was no decline in the preoperative mean values [100.9% predicted] and postoperatively the value rather increased [106.3-161.7% predicted]. Forced expiratory volume [FEV 0.5 & FEV 1.0] and forced expiratory flow [FEF 200-1200 ml & FEF 25-75%] also revealed significant declines in the early postoperative period. There was no significant difference in values of the spirometric pulmonary function tests, such as FEF 1.O and FEF 25-75% between successful weaning group [17 cases] extubated within 24 hrs post-operatively and unsuccessful weaning group [5 cases] extubated beyond 24 hrs. Static compliance and airway resistance measured for the two cases during assisted ventilation, however, any information was not obtained. Long term follow-up pulmonary function studies were carried out for 8 cases in 9 months post-operatively. All of the results returned to the pre-operative or to normal predicted levels except FVC, FEV 1.0, and FEF 25-75% those showed minimal declines compared to the pre-operative figures.

• Clinical and Experimental Reproductive Medicine
• /
• v.19 no.2
• /
• pp.125-131
• /
• 1992

The possible effect of human follicular fluid(hFF) on the growth and development of fertilized oocytes and embryos is important because the fallopian tubes are exposed to FF after follicular rupture and the processes of fertilization and embryo cleavage occur inside the fallopian tubes. Previously, it was suggested that human FF might adversely affect on the development of early mouse embryos. In order to investigate the effect of hFF on the development of embryos, early mouse embryos were cultured in media containing various protein sources as bovine serum albumin(BSA), fetal cord serum(FCS) and FF. And we evaluated the development of early mouse embryos in terms of the morphology, cleavage rate, and cell count of blastcysts. There were no significant differences in the morula and blstocyst formation rates of 2-cell mouse embryos cultured in the media containg three different protein sources and three different concentrations of FF. The blastocyst formation rate of 1-cell mouse embryo cultured in FF group was significantly higher than that cultured in BSA group(P<0.05). The morula and blastocyst formation rates of 2-cell mouse embryos of the group cultured in the media containing FF were comparable with those of other two groups, in addition, the cell count of blastocysts of FF group in the 2-cell embryo culture was higher than those of BSA group and HCS group(P<0.01), and this finding was also noted in 1-cell embryo culture. There was no difference in the morula and blastocyst formation rates of the 2-cell mouse embryos cultured in the media containing different concentrations of FF. These results suggest that mature human follicular fluid has no inhibitory activity on the development of early mouse embryos even in high concentration and may be a good protein source which is positively associated with the development of mouse embryos in vitro especially in 1 cell embryo culture.

• Journal of Trauma and Injury
• /
• v.24 no.2
• /
• pp.82-88
• /
• 2011

Background: The incidence of abdominal trauma with intra-abdominal organ injury or bowel rupture is increasing. Articles on the diagnosis, symptoms and treatment of small bowel perforation due to blunt trauma have been reported, but reports on the relationship of mortality and morbidity to clinical factors for prognosis are minimal. The purposes of this study are to evaluate the morbidity and mortality of patients with small bowel perforation after blunt abdominal trauma on the basis of clinical examination and to analyze factors associated with the prognosis for blunt abdominal trauma with small bowel perforation. Methods: The clinical data on patients with small bowel perforation due to blunt trauma who underwent emergency surgery from January 1994 to December 2009 were retrospectively analyzed. The correlation of each prognostic factor to morbidity and mortality, and the relationship among prognostic factors were analyzed. Results: A total of 83 patients met the inclusion criteria: The male was 81.9%. The mean age was 45.6 years. The mean APACHE II score was 5.75. The mean time interval between injury and surgery was 395.9 minutes. The mean surgery time was 111.1 minutes. Forty seven patients had surgery for ileal perforations, and primary closure was done for 51patients. The mean admission period was 15.3 days, and the mean fasting time was 4.5 days. There were 6 deaths (7.2%), and 25 patients suffered from complications. Conclusion: The patient's age and the APACHE II score on admission were important prognostic factors that effected a patient's progress. Especially, this study shows that the APACHE II score had effect on the operation time, admission period, the treatment period, the fasting time, the mortality rate, and the complication rate.

• Journal of Chest Surgery
• /
• v.26 no.4
• /
• pp.282-293
• /
• 1993

From Sep. 1985 to Dec. 1992, total 1000 cases of open heart surgery [OHS] were performed in the department of Thoracic & Cardiovascular Surgery, Pusan Paik Hospital, College Of Medicine, Inje University.Among the total 1,000 cases of OHS, there were 823 cases with congenital heart diseases [CHD] and 177 cases with acquired heart diseases [AHD]. The age distribution was 9 days [4.0 kg] to 49 years in CHD and 11 to 64 years in AHD, In the 823 cases of CHD, there were 763 acyanotic cases and 60 cyanotic cases. The CHD cases consisted of 520 VSD [63.2 %], 177 ASD [21.5 %], 60 TOF[7.3 %], 27 PS [3.3 %], 17 ECD [2.1%], 7 Valsalva sinus rupture [0.9 %], 4 TGA [0.5 %], 3 Ebstein`s anomaly [0.4%], 3 DORV[0.4%], and others. The corrective operations were applied for congenital heart disease with the result of 2. 8 % hospital mortality. In the 177 AHD, 168 cases were valvular heart diseases, 7 cases were cardiac tumors and one LA thrombus and one annuloaortic ectasia. In the 168 valvular heart diseases, there were 115 single valve replacement cases [16 AVR, 99 MVR], 20 cases of double valve replacement[AVR & MVR], 15 cases of MVR with TVA, and 10 cases of AVR, MVR with TVA. The total implanted prosthetic valves were 199`. In MVR, 66 of St. Jude Medical valves, 78 ofCarpentier-Edward valves, and 5 of Ionescu-Shiley valves were used. In AVR, 38 of St. Jude Medical valves and 12 of Carpentier-Edward valves were used.The hospital operation mortality rate of congenital acyanotic, cyanotic, and acquired heart diseases were 1.6%, 18.3 % and 3.4% respectively. The overall mortality rate was 2.9 % [29/1000].

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2014

Buried natural gas pipelines in densely populated urban areas have serious hazards of property damages and casualties generated by release, dispersion, fire and explosion of gas caused by outside or inside failures. So as to prevent any accident in advance, managers implement danger management based on quantitative risk analysis. In order to evaluate quantitative risk about buried natural gas pipelines, we need calculation for radiant heat and pressure wave caused by calculation for release rate of chemical material, dispersion analysis, fire or explosion modeling through consequence analysis in priority, in this paper, we carry out calculation for release rate of pressured natural gas, radiant heat of fireball based in accident scenario of actual "San Bruno" buried high pressured pipelines through models which CCPS, TNO provide and compare with an actual damage result.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.76-83
• /
• 2001

This study was carried out to clarify the mechanical behaviour of the earlywood and the latewood to the compressive load applied parallel to the grain. The results from the analysis of Japanese cedar wood (Cryptomeria japonica) were used to introduce a concept on stress-strain behaviour of the earlywood and the latewood. There was a significant differences in the mechanical behaviour of the earlyWood and the latewood. In the earlywood, the rate of cell wall upon annual ring was almost similar and the strain increased linearly with the stress increased. However, the rate of cell wall upon annual ring varied in the latewood and the strain of that increased curve-linearly with the stress increased. The longitudinal compression modulus of elasticity (MOE) variation by loading speed on latewood specimens and earlywood specimens shows no significant difference. The modulus of rupture (MOR) and MOE of latewood were about 4 times higher than those of earlywood.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

• Journal of Veterinary Clinics
• /
• v.26 no.5
• /
• pp.476-479
• /
• 2009

Enucleation of a 9-year-old, spayed female Pekingese's right eye was scheduled because of recurrent eyeball rupture caused by chronic corneal ulcer and descemetocele. Scoliosis of the thoracic vertebra was observed on thoracic radiography. Complete blood count, electrolytes, serum chemistry profiles were within normal ranges except of alkaline phosphatase, which was markedly improved, compared with that of five months ago. Severe respiratory sinus arrhythmia was observed before induction of anesthesia, it disappeared after induction. Retrobulbar block was performed with 0.5% bupivacaine, 2% lidocaine, 0.1% epinephrine combination (4 : 1 : 0.2 ratio of volume) before start of surgery. After retrobulbar block, heart rate decreased from 110 to 76 beats/min and sinus arrhythmia recurred. It was considered as oculocardiac reflex caused by increase of intraorbital pressure from retrobulbar block, atropine (0.025 mg/kg, IV) was administered and intermittent positive pressure ventilation was started. Three minutes after atropine administration, abnormal waveform of the electrocardiograph was appeared, it suspected as ventricular or supraventricular tachycardia, so lidocaine (2 mg/kg, IV) was administered. Then, heart rate was maintained around 130 beats/min, and the surgery was finished without the other problems. Although, retrobulbar block is performed to provide analgesia and to prevent oculocardiac reflex in ophthalmic surgery, occasionally it could induce oculocardiac reflex by infiltrated volume.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.55-60
• /
• 2002

For the development of a new creep test technique, the availability of SP-Creep test is discussed for 1Cr-0.5Mo boiler header material. And some results are also compared with those of 2.25Cr- 1Mo steel which widely uses as boiler superheater tube. The results can be summarized as follows. The load exponents(n) obtained by SP-Creep test for 1Cr-0.5Mo steel are decreased with increasing creep temperature and the values are 15.67, 13.89, and 17.13 at 550$^{circ}C$ ,575$^{circ}C$ and 600$^{circ}C$, respectively. The temperature dependence of the load exponent is given by n = 107.19 - 0.1108T. This reason that load exponents show the extensive range of 10∼16 is attributed to the fine carbide such as M$_{23}$C$_{6}$ in lath tempered martensitic structures. At the same creep condition, the secondary creep rate of 1Cr-0.5Mo steel is lower than the 2.25Cr-1Mo steel1 due to the strengthening microstructure composed by normalizing and tempering treatments. Through a SEM observation, it can be summarized that the primary, secondary, and tertiary creep regions of SP-Creep specimen are corresponding to plastic bending, plastic membrane stretching, and plastic instability regions among the deformation behavior of four steps in SP test, respectively.y.