• Journal of Korean Neurosurgical Society
• /
• v.38 no.3
• /
• pp.190-195
• /
• 2005

Objective : This study is performed to evaluate the procedural complications, aneurysm occlusion rate, and mid-term outcome of endovascular treatments in intracranial aneurysms. Methods : We retrospectively investigated 135 patients with 161 cerebral aneurysms who were treated by endovascular means at our institute from March 1999 to December 2004. We statistically analyzed overall outcome, occlusion rate, and occurrence of complications according to the location, size, rupture history, and neck size of aneurysms. Results : Forty-nine patients [36.3%] had experienced acute intracranial or extracranial complications related to the procedure. Among these, there were 13cases of perforation of the aneurysm, 9 of local vasospasm, 8 of thromboembolism, 4 of coil migration, 3 of occlusion of parent vessels due to coil protrusion, and 1 of seizure. Extracranial complications occurred in 14cases including alopecia [9cases], femoral artery thrombosis [2cases], acute renal failure [2cases], and hypovolemic shock [1case]. One hundred twenty-six aneurysms [78.3%] had complete occlusion of the aneurysm and 35 [21.7%] incomplete occlusion at 6months angiographic follow-up. Postembolization clinical follow-up ranged from 1 to 60months [mean, 14.2months]. Seven of the 161 aneurysms underwent additional embolization and 2 incomplete embolized aneurysms required subsequent surgery. Conclusion : The procedural complications and incomplete occlusion rates are substantial. Therefore, endovascular treatment needs close and continued neurosurgical and neuroradiological concerns for the therapy of intracranial aneurysms.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1525-1531
• /
• 2019

The indigenous nuclear power program of India is based mainly on a series of Pressurised Heavy Water Reactors (PHWRs). A burst correlation for Indian PHWR fuel claddings has been developed and empirical burst parameters are determined. The burst correlation is developed from data available in literature for single-rod transient burst tests performed on Indian PHWR claddings in inert environment. The heating rate and internal overpressure were in the range of 7 K/s-73 K/s and 3 bar-80 bar, respectively, during the burst tests. A burst criterion for inert environment, which assumes that deformation is controlled by steady state creep, has been developed using the empirical burst parameters. The burst criterion has been validated with experimental data reported in literature and the prediction of burst parameters is in a fairly good agreement with the experimental data. The burst criterion model reveals that increasing the heating rate increases the burst temperature. However, at higher heating rates, burst strain is decreased considerably and an early rupture of the claddings without undergoing considerable ballooning is observed. It is also found that the degree of anisotropy has significant influence on the burst temperature and burst strain. With increasing degree of anisotropy, the burst temperature for claddings increases but there is a decrease in the burst strain. The effect of anisotropy in the ${\alpha}$-phase is carried over to ${\alpha}+{\beta}$-phase and its effect on the burst strain in the ${\alpha}+{\beta}$-phase too can be observed.

• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.665-681
• /
• 2023

Liquefaction is one of the most devastating geotechnical phenomena that severely damage vital structures and lifelines. Before constructing structures on problematic ground, it is necessary to improve the site and solve the geotechnical problem. Among ground improvement methods dealing with liquefaction, gravel drain (GD) columns and deep soil mixing (DSM) columns are popular. In this study, the results of a series of seismic experiments in a 1g environment on a structure located over liquefiable ground with different thicknesses reinforced with GD and DSM techniques were presented. The dynamic response of the reinforced ground system was investigated based on the parameters of subsidence rate, excess pore water pressure ratio, and maximum acceleration. The time history of the input acceleration was applied harmonically with an acceleration range of 0.2g and at frequencies of 1, 2, and 3 Hz. The results show that the thickness of the liquefiable layer and the frequency of the input motion have a significant impact on the effectiveness of the improvement method and all responses. Among the two techniques used, DSM in thick liquefied layers was much more efficient than GD in controlling the subsidence and rupture of the soil under the foundation. Maximum settlement values, settlement rate, and foundation rotation in the thicker liquefied layer at the 1-Hz input frequency were higher than at other frequencies. At low thicknesses, the dynamic behavior of the GD was closer to that of the DSM.

• The Journal of Korean Physical Therapy
• /
• v.34 no.6
• /
• pp.326-331
• /
• 2022

Purpose: The stroke patients have gait dysfunction due to impaired neural tracts; corticospinal tract (CST), corticoreticular pathway (CRP), and vestibulospinal tract (VST). In this study, we investigated characteristics of gait pattern according to the injury aspect of the neural track in a stroke patient. Methods: One patient and six control subjects of similar age participated. A 19-year-old male patient with spontaneous intracerebral hemorrhage on right basal ganglia, thalamus, corona radiata and cerebral cortex due to arteriovenous malformation rupture. Diffusion tensor imaging (DTI) data was acquired 21 months after the stroke. Kinematic and spatio-temporal parameters of gait were collected using a three-dimensional gait analysis system. Results: On 21 months DTI, the CST and CRP in affected hemisphere showed severe injury, in contrast, the VST in affected hemisphere showed intact integrity. Result of gait analysis, walking distance and speed were significantly decreased in a patient. The stance rate of unaffected lower limb, the swing rate of affected lower limb and the duration of double stance significantly increased compared with normal control. The knee and hip joint angle were significantly decreased in a patient. Conclusion: We found recovered independent gait ability may be associated with unimpaired VST in a patient with severe injury in CST and CRP.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.593-600
• /
• 1989

Fine spinel powder was prepared from the Mg-Al double alkoxide synthesized using magnesium powder, aluminum foil and sec-butyl alcohol. This powder was compared with powder prepared by mixing two commercial alkoxides. The spinelization was started at 50$0^{\circ}C$ and was almost completed at 100$0^{\circ}C$ with a good crystallinity in the double alkoxide system. In mixed alkoxide system, homogeneous spinel powder was not obtained and MgO existed as a second phase because of solubility and hydrolysis rate differences of two alkoxides. The relative density of specimen prepared by double alkoxide was 99% and specimen prepared by mixed alkoxide was 95%. The modulus of rupture of specimens prepared by double alkoxide and mixed alkoxide was 49.9kg/$\textrm{mm}^2$ and 41.6kg/$\textrm{mm}^2$, respectively.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.109-115
• /
• 1999

The release of gas from the LPG storage tank by the rupture or leakage can occure explosion and this causes serious damage to people and structures. In this study, the explosion effect and damaging distance were measured for the LPG cloud explosion to perform the quantitative risk assessment for the PSM, and the effective parameters on the explosion were found. The gas dispersion and mass contaminant in the explosion limits were calculated by using DEGADIS, and it was converted to TNT equivalency and damaging distance. As a result, the wind speed was the most effective parameter on the diffusion rate and TNT equivalency, and the damaging distance were increased with decrease of wind speed and surface roughness.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.131-136
• /
• 1998

The creep behavior and failure mechanism of the 30 vol% hot-pressed $SiC_t/Si_3N_4$ ceramic composite was experimentally investigated at $1200^{\circ}C$ and at various stress levels in air. The creep threshold stress for zero creep rate after 100 hr was found to be approximately 60 MPa. The stress exponent was estimated to be n~1, which suggests that fiber-reinforcement reduced the stress sensitivity of the HPSN matrix with the stress exponent of 2. The tertiary stage leading to creep rupture was found at 250 MPa but was very short. The microstructure of the crept specimen showed random fiber fracture and no matrix cracking. Interfacial debonding was absent.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.16-24
• /
• 1991

This paper presents a method of the reliability analysis for a tension leg platform(TLP)in severe storm waves by using the first passage concept of the random tensile stress in the tendons. In the present method, two failure conditions are considered ;i.e., the exceedance of the ultimate tensile capacity and the occurrence of the negative tension. In order to consider the correlation effects between the failure events for each corner resulted from the rupture of all tencons at one corner, a new system limit state for a rectangular shaped TLP is developed, which is defined in terms of the TLP motions in the vertical plane ;i.e., heave, roll, and pitch. To illustrate the validity of the present method, the numerical analysis is carried out for two TLP's with different structural dimensions. Then, the results are compared with those by other methods.

• Journal of the Korea Furniture Society
• /
• v.25 no.2
• /
• pp.96-103
• /
• 2014

The objective of this study was to increase the utilizability of domestic thinning and small diameter wood as applying in pattern design which can be used in interior decoration, wood craft and wood furniture, and in developing the designs of furniture and household items. We investigated the physical and mechanical characteristics of Betula platyphylla Wood by pressurization and heat treatment. Color change is clear, and the wood density is increased with increasing pressing rate. The compressive strength, modulus of rupture and modulus of elasticity in bending strength are decreased as heating time is increased after pressing. However, shrinkage is improved after pressing and heating.

• Journal of Chest Surgery
• /
• v.12 no.2
• /
• pp.127-134
• /
• 1979

During the 4 years period to be reported, 34 operations were performed on the mitral valve in the department of Thoracic and cardiovascular surgery, Korea University hospital, from Aug. 1975 to April 1979. At the first 1-year period, the closed technique was used in 12 patients. After that, open-heart surgery was used routinely; 8 patients had open mitral commissurotomy and 14 patients had valve replacement. There were 18 men and 16 women with sex ratio of 1.1: 1. The age of the patients varied widely from 18 years of the youngest to 46 years of the oldest-average aged of 32.5 years. All had symptoms and the mean duration of symptoms was 6 years and 1 month. Preoperative atrial fibrillation was 47% and embolizations were in 3 of 34 patients. The operative mortality was none for the closed and 14% for the open technique combined rate of 9 per cent which were valve thrombosis, brain embolism and left pulmonary vein rupture in deauriculization. But surviving patients undergoing open heart surgery enjoyed symptomatic benefits comparable to these of the patients of closed.