• Tuberculosis and Respiratory Diseases
• /
• v.47 no.2
• /
• pp.265-271
• /
• 1999

Patients with mediastinal teratoma are usually asymptomatic, but may develop symptoms by rupture into adjacent structures which result in pneumonia, hemoptysis, pleural effusion, pericardial effusion, or pneumothorax. Rarely, life-threatening acute respiratory distress require a emergency surgery. Rupture into pleural cavity may result in pleuritis and pleural effusion with severe anterior chest or back pain. The symptom must be differentiated from other common intrathoracic distress diseases. Clinical, cytologic and radiologic examinations of pleural effusion, and moreover, measurement of enzymes such as amylase or insulin, which is secreted from pancreatic tissues, in pleural effusion and cystic fluid enabled us to make the diagnosis of rupture of mediastinal teratoma preoperatively.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.1
• /
• pp.12-16
• /
• 2023

Purpose: Postoperative exercise for acute Achilles tendon rupture is important for a patient's return to daily life and sports. On the other hand, the protocol requires considerable effort to educate patients and continuous checking. This study evaluated the outcome of a new simple and delayed rehabilitation protocol after Achilles tendon rupture repair. Materials and Methods: From July 2014 to November 2020, one hundred eighty-three patients were operated on by one surgeon. The exercise protocol was classified into two methods. One group (immediate protocol, control group) started immediate full weight bearing with a 20° plantar flexion range of motion from two days postoperatively. Ankle dorsiflexion was restricted to 0°. The other group (delayed protocol, case group) started full weight bearing with a controlled ankle motion boot from two weeks postoperatively. No range of motion exercise was allowed until six weeks postoperatively. Age, sex, body mass index, ankle range of motion, muscle power, time to return to previous physical activity, functional score, and complication rate were evaluated. The results of the two groups were compared using a Mann-Whitney test. Statistical significance was set as p<0.05. Results: The range of motion, double heel rising, and one-leg standing were achieved faster in the control group (p<0.05). However, single-heel rising, repeated single-heel rising, return to previous activity (work, run, and sport), and functional scores showed no statistical difference (p>0.05). Conclusion: Simple and delayed postoperative rehabilitation of acute Achilles tendon rupture without active range of motion exercises showed satisfactory functional results and a low complication rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1455-1461
• /
• 1991

본 연구에서는 Kachanov의 재료손상(material damage)모델을 이용하여 새로운 수명예측식을 만들고, 이 수명예측식의 타당성을 조사하기 위하여, 최근에 발표된 크 립 수명과 기공분포와의 실험결과와 비교하였다.

• Journal of Chest Surgery
• /
• v.10 no.1
• /
• pp.82-89
• /
• 1977

A rupture of a dissecting aneurysm of the aorta is life threatening disease and calls for emergency surgical treatment. The author recently experienced one case of ruptured dissecting aneurysm of the descending thoracic aorta complicated with left hemothorax who was recovered after emergency operation of Aug. 11, 1976. The patient was a 43 years old farmer with known hypertension [260/120] for 20 years but without any venereal disease and had experienced sudden throbbing chest pain. Chest film and aortogram revealed this case ruptured aneurysm of descending thoracic aorta complicated with left hemothorax. In this case, large dissecting aneurysm extend from proximal part of left subclavian artery below diaphragm and involved with 3.0 and 4.0cm sized elliptical rupture in proximal part of descending thoracic aorta. And so, neither fenestration procedure nor replacement of dacron artificial vessel was suitable for this case. Finally, only the rupture site of aneurysm was treated by covering with fibrous pleura and teflon patch. The post-operative management of this case was planned to control hypertension with antihypertensive drugs. The follow-up was possible up to date about 2months. The patient has been doing well with ordinary activities except mild chest discomfort.

• Journal of Chest Surgery
• /
• v.25 no.8
• /
• pp.812-818
• /
• 1992

The spontaneous rupture of the esophagus is an uncommon disease, but without early diagnosis and treatment, the mortality rate is high. This report is on the two cases treated at the Department of Thoracic and Cardiovascular Surgery, College of Medicine, Kyu-ngpook National University. The first patient, after heavy drinking, had vomiting followed by chest pain, dyspnea and subcutaneous emphysema. After diagnosis using an esophagogram, an operation was perfomed. About a 4cm rupture was found at the lower left part of the esophagus and was primarily sutured with the intercostal muscle. The patient was weaned from the ventilator after 40 hours. The second patient had symptoms the same as the first case. Six days after the app-earence of the symptoms, the patient was treated by the Thais onlay gastric patch method. The leakage happened after the surgery and he received a conservative treatment. After discharge no abnormalities, such as leakage and stricture, were found on the eso-phagogram The two patients now live a normal life.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.39-44
• /
• 2008

Magnesium alloys have given high attention to the industry of light-weigh as automobile and electronics with aluminium, titanium and composite alloys due to their high strength, low specific density and good damping characteristics. But the magnesium contained structures under high temperature have the problems related to creep deformation and rupture life, which is a reason of developing the new material against creep deformation to use them safely. The purpose of this study is to predict the creep deformation mechanism and rupture time of AZ31 magnesium alloy. For this, creep tests of AZ31 magnesium alloy were done under constant creep load and temperature with the equipment including automatic temperature controller with acquisition computer. The apparent activation energy Qc and the applied stress exponent n, rupture life have been determined during creep of AZ31 Mg alloy over the temperature range of $150^{\circ}C$ to $300^{\circ}C$. In order to investigate the creep behavior. Constant load creep tests were carried out in the equipment including automatic temperature controller, whose data are sent to computer. At around the temperature of $150^{\circ}C{\sim}300^{\circ}C$ the creep behavior obeyed a simple power-law relating steady state creep rate to applied stress and the activation energy for the creep deformation was nearly equal and a little low, respectively, to that of the self diffusion of Mg alloy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.63-64
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.85-86
• /
• 2007

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.143.2-143.2
• /
• 2005

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.