• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.98-104
• /
• 2007

As the industrial society is highly developing, human need in daily life has also changed drastically. With the introduction of 40 hour working week system, more households enjoy picnics on weekends. More gas accidents take place on Saturdays and on Sundays than any other days of week. In this context, the Institute of Gas Technology Training in Korea Gas Safety Corporation carries out explosion experiment to make trainees to take all possible measure to ensure safe management of gas in the field by fully recognizing the hazards of gas explosion accidents. In this study, the influence of explosion over-pressure caused by the rupture of butane can thrown away after use was calculated by using the Hopkinson's Scaling Law and the accident damage was estimated by applying the influence on the adjacent people into the Probit model. The value of those away from 50 meters from the explosion site was 1.35kPa and the peak overpressure to thoes away from 25 meters directly was 3.2kPa. Those value was input to the PROBIT model, the estimation showed the sante result 0 percent of damage possibility.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.117-127
• /
• 1991

When open reduction of maxilla fractures is postponed due to concurrent life-threatening injuries, delayed union may result with malunion or nonunion. If delayed malunion is occurred, significant facial deformity may result, including a dished-out face, irregular retromaxillism with Angle's class III malocclusion, open anterior bite, nasal collapse, telecanthus and malar flattening. The treatment planning for this problem includes cephalometric evaluation anterior and lateral tomograms, dental casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue attachment at the fracture site. In this paper, one case presented a 58-year-old female patient with maxilla retrusion after comminuted fracture, who was treated with orthodontic methods of maxillary protraction headgear and Plaster headcap, whereas the other two cases were about male patients who were treated principally with surgically open reduction or Le Fort I-controlled transverse osteotomy with iliac bone graft.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.48-56
• /
• 2016

In this study, to develop the lattice materials with a low environmental load for restoring the destroyed forest, 7 types of wood-concrete hybrid laminated materials were manufactured with domestic four softwoods, three hardwoods and concrete, and the effects of density of wood species on static bending strength performances were investigated. Bending MOEs of wood-concrete hybrid laminated materials increased with increasing density of wood species on the whole, and the values were higher than that of concrete by hybrid-laminating woods on the concrete. It was found that the measure values of bending MOEs were slightly lower than the calculated values calculated using equivalent cross-section method from MOE of each laminae of hybrid laminated materials and the difference between them was less than 10%. Bending proportional limit stresses of hybrid laminated materials showed 1.2-1.6 times higher than that of concrete by hybrid-laminating. Bending strength (MOR) of hybrid laminated materials increased with the density of wood species. By hybrid-laminating, the MOR of concrete was considerably increased. Therefore, it is considered that wood-concrete hybrid laminated materials can be applied as a materials with a low environmental load and durability for ecological restoration.

• Women's Health Nursing
• /
• v.5 no.1
• /
• pp.80-95
• /
• 1999

The purpose of this study was to investigate the characteristics of low birth-weight infants and their's mothers, and to identify the factors which influenced to delivery of L.B.W infants. The data derived from K. General Hospital and J. obs & gyn clinic in pusan from January, 1998 to August, 1998, which were from mothers of having B. W infants. The factors used for this study were characteristics of general, obstetrical, environmental aspects and physical and psychological life experiences during pregnancy. Analysis of data obtained were computerized statistically by using SPSS 7.5 WIN program. the data were analysed as number, frequency, percentage, t-test and ANOVA. The major results obtained of this study were as follows : 1) Gender that L.B.W infants were male in 47.2% and female in 52.8%, body weight of 2001~2500gm was above 8 in 68.5%, and below 5 in 1.8%. The L.B.W infants with complications were 7, which were 6.5%. The kinds of malformations were the Cleft palate & lip, Hyper-kalemia, Hypoglycemia, Meningocele, CHD, Down syndrome and each of them marked 0.9%. 2) In the general characteristics of pregnant women, the age group of 25~29 years was the most common as 46.3%. Over 35 years of age, elderly gravidas were in 7.5%. the height of 156~160cm was the most common as 52.8%. pregnant women of below 150cm height was in 3.7%. body weight of 51~55kg was the most common as 38%. pregnant women of below 45kg were in 19.4%. The women with smoking and drinking episodes during pregnancy were 1.9% and 25%. In the status of marriage, married women were in 95.4%, unmarried ones were in 1.9%, and unmarried couples were in 2.8%. Iin he obstetrical characteristics of pregnant women, pregnant women with gestational age under 37wks were in 45.4%, and the ones over 38wks were 54.6%. At the methods of delivery, normal spontaneous vaginal deliveries were in 51.9%, which were the most common, cesarian section deliveries were in 47.2%, and breech deliveries were in 0.9%. In the environmental characteristics of pregnant women, 40.8% of pregnant women lived in house or apartments with stairs, 23.1% of them lived in the high altitude. the pregnant women who ran a household without a helper were in 65.7%. In the pregnant women who had underwent life experiences of physical and psychological stress during pregnancy. life experiences of physical stresses were described as persistent fatigue due to lifestyle, traumatic experience, illness, move away with an effort, physical impact caused by discord. life experiments of psychological stresses were describeded as trouble with their husbands, discord with one's husband family, family problems, and conflicts due to environmental factors, etc. The number of the pregnant women who had complications during pregnancy was 32, which was 29.6% totally. Among them, pre-eclampsia was in 12.1% and the premature rupture of membrane in 7.4%. 3) In the analysis of the general, obstetrical, and circumstantial characteristics and L.B.W infants. There were statistical difference significantly between the gestational age of pregnant women(F=12.035, P=.000), and the status of marriage(F=3.207, P=.044), and maternal complication(t=2.344, P=.021) etc.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.546-555
• /
• 2009

To study an effective use of woods, three-ply hybrid laminated woods instead of crosslaminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements for the core laminae on bending strength performances was investigated. Bending modulus of elasticity (MOE) of hybrid laminated woods had the highest values for the hybrid laminated wood types arranging OSB laminae in the core, and had the lowest values for those arranging MDF laminae in the core. These values were higher than those of various cross-laminated woods. The estimated bending MOEs of the hybrid laminated woods which were composed of perpendicular-direction lamina of spruce in the faces were similar to their measured values, regardless of wood-based boards in the core. However, those of the hybrid laminated woods which were composed of parallel-direction lamina of spruce in the faces had much higher values than those of their measured values, and it was necessary to revise the measured values. Bending modulus of rupture (MOR) of the hybird laminated woods had the highest value for those arranging OSB laminae in the core, and had the lowest values for those arranging PB laminae in the core unlike the bending MOE. By hybrid laminating, the anisotropy of bending strength performances was markedly decreased, and the differences of strength performances among wood-based boards were also considerably decreased.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.114-123
• /
• 2019

The paper relates to a study on the changes in performance of insulation sheath resulting from accelerated degradation of IV and HIV insulated wire. To assume insulation degradation of IV and HIV insulated wire, accelerated life tests using Arrhenius equation were conducted among accelerated life test models, and experimental samples of 0 year, 10 years, 20 years, 30 years, and 40 years in equivalent life were produced. Whereas the maximum tensile load were increased as accelerated degradation of IV and HIV insulated wire progressed, elongation percentage, rupture time, and flexibility of insulated wires were found to be gradually reduced. According to the additional surface analysis results for the insulated wires per equivalent life using a scanning electron microscope, mechanical properties of the insulator were observed to be reduced as insulation degradation resulting from aging progressed since phenomena such as formation of crystalline structures and perforation, etc. occurred on the sample surface with progression of accelerated degradation. Consequently, institutional replacement of insulated wires and preparation of repair times considering performance degradation of the insulator installed inside buildings are considered necessary in order to prevent in advance the risks of electrical fire resulting from degradation in insulation performance.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.62-71
• /
• 2018

According to own investigation conducted by Korea Gas Safety Corporation Gas Safety Research Institute in 2017, the length of underground pipes in domestic high-pressure gas pipelines is approximately 770km, of which 84% is buried in Ulsan and Yeosu industrial complexes. In particular, 56% of underground pipelines have been in operation for more than 20 years. This suggests urgent management of buried high pressure gas pipelines. PHMSA in US and EGIG in Europe, major causes of accidents in buried gas pipelines are reported as third party damage, external corrosion and loss of pipe wall thickness. Therefore, it is important to evaluate whether the defects affect the remaining life of the pipe when defects occur in the pipe. DNV and ASME have evaluated the residual strength of pipelines through the hydraulic rupture test using pipe specimens with artifact flaws. Once the operating pressure is known through the residual strength of the pipe, the wall thickness at the point at which the pipe ruptures is calculated. If we know the accurate rate of corrosion growth, we can predict the remaining life of pipe. In the study, we carried out experiments with A53 Grade.B and A106 Grade.B, which account for 80% of domestic buried pipes. In order to modify the existing model equation, specimens with a defect depth of 80% to 90% was tested, and a formula expressing the relationship between defect and residual strength was made.

• Journal of Chest Surgery
• /
• v.47 no.2
• /
• pp.117-123
• /
• 2014

Background: Implanted venous access devices or permanent central venous access systems (PCVASs) are routinely used in oncologic patients. Complications can occur during the implantation or use of such devices. We describe such complications of the PCVAS and their management. Methods: Our retrospective study included 1,460 cases in which PCVAS was implanted in the 11 years between January 2002 and January 2013, including 810 women and 650 men with an average age of 45.2 years. We used polyurethane or silicone catheters. The site of insertion and the surgical or percutaneous procedure were selected on the basis of clinical data and disease information. The subclavian and cephalic veins were our most common sites of insertion. Results: About 1,100 cases (75%) underwent surgery by training surgeons and 360 patients by expert surgeons. Perioperative incidents occurred in 33% and 12% of these patients, respectively. Incidents (28%) included technical difficulties (n=64), a subcutaneous hematoma (n=37), pneumothoraces (n=15), and an intrapleural catheter (n=1). Complications in the short and medium term were present in 14.2% of the cases. Distortion and rupture of the catheter (n=5) were noted in the costoclavicular area (pinch-off syndrome). There were 5 cases of catheter migration into the jugular vein (n=1), superior vena cava (n=1), and heart cavities (n=3). No patient died of PCVAS insertion or complication. Conclusion: PCVAS complications should be diagnosed early and treated with probable removal of this material for preventing any life-threatening outcome associated with complicated PVCAS.

• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.1-6
• /
• 2018

Reliability based design and assessment (RBDA) methodology is one of the newest directions of natural gas pipeline design method. Reliability targets are used to ensure that safety levels are met relevant limit states in the stage of design and maintenance. The target reliability for ultimate limit states such as large leak and rupture were developed using tolerable risk criteria for individual and societal risk. This paper shows the reliability target can be met through the implementation of periodic maintenance measures during the life cycle of the pipelines. The case study involves the calculation of the failure probability due to equipment impact, the calculation of the failure probability due to corrosion, and the estimation the re-inspection interval for domestic natural gas transmission pipelines.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1995-2001
• /
• 2001

In this study, a small punch creep(SP-Creep) test using miniaturized specimen(10${\times}$10${\times}$0.5mm) is described to develop the new creep test method for high temperature structural materials. The SP-Creep test is applied to 2.25Cr-lMo(STBA24) steel which is widely used as boiler tube material. The test temperatures applied for the creep deformation of miniaturized specimens are between 550∼600$^{\circ}C$. The SP-Creep curves depend definitely on applied load and creep temperature, and show the three stages of creep behavior like in conventional uniaxial tensile creep curves. The load exponent of miniaturized specimen decreases with increasing test temperature, and its behavior is similar to stress exponent behavior of uniaxial creep test. The creep activation energy obtained from the relationship between SP-Creep rate and test temperature decreases as the applied load increases. A predicting equation or SP-Creep rate for 2.25Cr-lMo steel is suggested. and a good agreement between experimental and calculated data has been found.