• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.667-671
• /
• 2010

Runs test is a mathematical tool to test the stationarity of electromyographic (EMG) signals. The purpose of this study is to investigate the effects of segmentation size on the stationarity of EMG signals in runs test. Six subjects participated in this experiment and performed isometric trunk exertions for twenty seconds at the load level of 25% and 50% MVC. The signals extracted from the erector spinae muscles were divided into the intervals of 1000ms and the stationarity of the signal in each interval was tested by the runs test. In this test, seven segmentation sizes such as 1.0, 2.0, 3.9, 7.8, 15.6, 31.3 and 62.5ms were applied. Additionally, two stationarity tests of reverse arrangements test and modified reverse arrangements test were used to verify the results of the runs test. In results, the segmentation size of 62.5ms showed the similar results with the other stationarity tests. However, the stationarity values among there tests were different each other when segmentation sizes other than 62.5ms were used. These results indicated the effect of segmentation size in runs test that needs to be considered to have consistent and sensitive result in stationarity test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.217-223
• /
• 1988

This study is to examine the cleaningproof by dry cleaning runs and parts(shoulder, belly, butt) of garment leathers tanned chrome. This study is composed of three methods of test; color difference test, surface view by scanning electron micrographs, mechanical properties measurement by KES-FB system. The results obtained were as follows: 1. In stiffening of parts of sample, the belly is the best degree in smoothness, fullness, softness. But that of the butt have been found to be the worst degree and to be thick. 2. In fading of parts, the shoulder is an extreme case, but the belly is the best among three parts. 3. In dry cleaning runs, the view after 3 runs has been found to be the best result. 4. The stiffening after dry cleaning 1 run have been low grade, for the sample absorb much solvent of dry cleaning. And, the fading and the decoloration are to be worse after 5 runs. Because the leather surface is affected by dry cleaning runs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.207-216
• /
• 1988

This study is to examine the cleaningproof by dry cleaning runs and parts(shoulder, belly, butt) of garment leathers tanned chrome. This study is composed of three methods of test; color difference test, surface view by scanning electron micrographs, mechanical properties measurement by KES-FB system. The results obtained were as follows: 1. In stiffening of parts of sample, the belly is the best degree in smoothness, fullness, softness. But that of the butt have been found to be the worst degree and to be thick. 2. In fading of parts, the shoulder is an extreme case, but the belly is the best among three parts. 3. In dry cleaning runs, the view after 3 runs has been found to be the best result. 4. The stiffening after dry cleaning 1 run have been low grade, for the sample absorb much solvent of dry cleaning. And, the fading and the decoloration are to be worse after 5 runs. Because the leather surface is affected by dry cleaning runs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.33-43
• /
• 1999

Drought is a serious diaster in agriculutre, especially to upland crops. Hence, the Agricultural Drought Analysis Model (ADAM) that is integratable with GIS was applied to analyae agriculture drought in upland. ADAM is composed of two sub-models , one is a Soil Water Balance Model (SWBM) and the other is a Drougth Analysis Model (DAM) that is based on the Runs theory. The ADAM needs weather data, rainfall data and soil physical characteristics data as input and calculates daily soil moisture contents. GIS was integrated to the ADAM for the calculation of regional soil moisture using digitized landuse map, detaile dsoil map, thiessen network and district boundary . For the agriculutral drought analysis, the ADAM adapt the Runs theory for analyzing drought duration, severity and magnitude . Log-Pearson Type-III probability distribution function and Kolmogorov-Smirnov test were used to test the fitness of good of the model. The integration of ADAM with GIS was successfully implemented and would be operated effectively for the regional drought analysis.

• Speech Sciences
• /
• v.10 no.1
• /
• pp.95-105
• /
• 2003

This paper describes a new parameter for voice activity detection which serves as a front-end part for automatic speech recognition systems. The new parameter called run-ratio is derived from the runs test statistic which is used in the statistical test for randomness of a given sequence. The run-ratio parameter has the property that the values of the parameter for the random sequence are about 1. To apply the run-ratio parameter into the voice activity detection method, it is assumed that the samples of an inputted audio signal should be converted to binary sequences of positive and negative values. Then, the silence region in the audio signal can be regarded as random sequences so that their values of the run-ratio would be about 1. The run-ratio for the voiced region has far lower values than 1 and for fricative sounds higher values than 1. Therefore, the parameter can discriminate speech signals from the background sounds by using the newly derived run-ratio parameter. The proposed voice activity detector outperformed the conventional energy-based detector in the sense of error mean and variance, small deviation from true speech boundaries, and low chance of missing real utterances

• The Korean Journal of Applied Statistics
• /
• v.27 no.1
• /
• pp.115-122
• /
• 2014

A test for randomness of the binary random sequence is proposed in this paper. The proposed test statistic is based on the mean length of runs distributed with truncated geometric distribution and asymptotically ${\chi}^2_2$-distributed when the size of the sequences is large. A small Monte Carlo simulation compared the size of the test with a significant level as well as evaluated the test power. We applied the proposed method to the sequence of yes or no numbers in Lotto 6/45 and concluded that the randomness of Lotto is retained.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.6-14
• /
• 2005

The mechanism of ballast-flying phenomena by strong wind induced by high-speed trains has extensively been investigated by conducting wind tunnel test and field-measuring of wind velocity in the vicinity of the track. The ballast gathered from the Seoul-Busan high-speed railway track has been classified by mass and shape to find relationship between those properties and the characteristic of movement in high wind and 16-channel Kiel-probe array has been used to examine the detailed flow structure above the surface of the track. The probability of ballast-flying during the passage of the high-speed train has been assessed comparing the results from wind tunnel test and that from field-measuring. The results shows that when the G7 train runs well as the KTX train runs at 300km/h, about 25m/s wind gust is induced just above the tie and the probability far small ballast under 50g to fly is about 50％ when it is on the tie. If the G7 train runs at 350km/h, the wind gust just above the tie increases to 30m/s, therefore radical countermeasure seems to be needed.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.17-21
• /
• 2000

In order to correct the strut interference in wind tunnel tests, image methods are conventionally used. Because of their excessive extra runs, some alternatives have been tried to reduce the extra runs. In this study, these alternatives were reviewed and checked by the strut interference evaluation with the panel code, CMARC. The present work shows that the strut interference is free from neither model configuration nor model attitude. This dependency makes the alternatives to the image method unfeasible. The 3-run image method was also evaluated. It worked well even for the exaggerated windshield. At this point, reducing the image runs by neglecting parameters affecting minor influence would be best.

• The Korean Journal of Applied Statistics
• /
• v.30 no.4
• /
• pp.503-512
• /
• 2017

In test with multiple choices, it is necessary to have the position of correct answers of each question spreaded evenly over all the questions in order to minimize the influence of answering tendency of test takers with preference to specific position of multiple choices. The scores of tests with correct answers in specific positions would not reflect exactly the academic aptitude of examinees who do not know correct answers but have the biased answering tendency. In this paper, we have randomness test for the positioning of correct answers at the 2017 College Scholastic Ability Test (CSAT) using Bartels rank test, the Wald-Wolfowitz runs test, the turning point test, the Cox Stuart trend test, the difference sign test and the Mann-Kendall tank test, etc. We also do independence test between the location of correct answer and the allocation of score in each question, for it may result in overestimating the test-taker with specific position preference in marking correct answers.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.614-618
• /
• 1999