• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.607-610
• /
• 2009

The abnormal combustion in the running engine results to knocking which increases the pressure and temperature in the cylinder, thereby decreasing the generated power by reducing the thermal efficiency. When the temperature and pressure in the cylinder increased rapidly by knocking, abnormal combustion takes place and the engine power is decreased. To investigate the knocking phenomenon, accelerometers are installed in the cylinder head to monitor and diagnose the vibration signal. As method of signal analysis, the time-frequency analysis method was adapted for acquisition of vibration signal and analyzes engine combustion in the short time. In this experiment, after analyzing time data which is stored in the signal recorder in one unit work (4 strokes: 2 revolutions), the signal with frequency and Wavelet methods with extracted one engine combustion data was also analyzed. Then, normal condition with no knocking signal is analyzed at this time. Hereafter, the experiments made a standard for distinguishing normal and abnormal condition to be carried out in acquisition of vibration signal at all cylinders and extracting knocking signal. In addition, analyzing methods can be diverse with Symmetry Dot Patterns (SDP), Time Synchronous Average (TSA), Wigner-Ville Distribution (WVD), Wigner-Ville Spectrum (WVS) and Mean Instantaneous Power (MIP) in the cold test [2]. With signal processing of vibration from engine knocking sensor, the authors adapted a part of engine /rotor vibration analysis and monitoring system for marine vessels to prevent several problems due to engine knocking

• 대한방사선치료학회지
• /
• 제20권2호
• /
• pp.123-130
• /
• 2008

목적: 의료환경의 변화와 교육환경의 변화에 신속하게 대처하기 위하여 대학에서는 필요한 실습 장비를 갖추고 있어야 한다. 그러나 재정적인 부담과 그것들을 유지 관리하는데 생기는 어려움으로 인해 국내의 대학들이 고가의 방사선 치료 장치를 설치하기는 불가능하다. 이로 인한 실습의 제약을 해소하기 위하여 김천대학 방사선과에서는 모형 선형가속기 및 모형 부속기구를 제작하여 학생들의 실습 시간에 활용하고 있으며 그 유용성에 대해 보고하고자 한다. 대상 및 방법: 우리가 자체 제작한 모형 선형가속기(DLINAC-001)는 실제 선형가속기와 동일한 회전지지축(gantry)과 조사 head의 회전이 가능하도록 제작하였다. 또한 실습교육의 극대화를 위해 우리는 자체적으로 모형 맞춤블록, 모형 쐐기필터, 모형 전자선 조사통과 환자고정기구를 제작 하였다. 결 과: 선형가속기의 기계적인 기능과 동일하게 모형 선형가속기를 활용할 수 있으며, 다양한 용도의 모형 부속기구들을 실습 시 활용할 수 있다. 결 론: 김천대학 방사선과에서 제작된 모형 선형가속기와 부속기구를 제작하여 학생들의 실습시간에 활용함으로서 다양한 영역의 임상실습이 가능하다. 또한 현장감 있는 실습을 시행함으로서 학습 효과를 극대화 할 수 있으며, 임상에서 요구하는 실무능력을 함양할 수 있다.

• Journal of Platform Technology
• /
• 제6권2호
• /
• pp.3-9
• /
• 2018

최근 VR 환경은 모바일학습, 스마트 공장을 포함한 다양한 분야에서 활용되고 있으나 개별 HMD(head-mounted display) 연계를 위한 고가 및 고사양의 전용운영 시스템이 요구된다. 또한 VR 시스템 설계 시에서는 기술적 고려사항인 가상체험공간에서의 이동성(mobility), 이용자 편의성(usability) 및 실감영상 제공을 위한 성능(performance)에 대한 문제해결이 필요하다. 많은 VR 응용은 스트리밍 기반으로 다양한 센서 및 지속적으로 사용자 입력을 다루어야 한다. 본 논문에서는 무선으로 콘텐츠를 제공받는 저가의 모바일 VR HMD 구성 및 이를 활용한 VR 모바일 플랫폼을설계한다. 제작된 HMD 는 실시간의 가속도계와 자이로 센서로부터 사용자의 움직임에 따른 회전각을 검출한다. 이를 위해 6 축 센서인 MPU-6050 의 활용하여 유니티 게임 엔진상의 VR 렌더링 서버에서 생성된 3D 이미지 렌더링를 처리하도록 개발한다.

• 한국자기공명학회논문지
• /
• 제20권1호
• /
• pp.27-35
• /
• 2016

NMR spectrometer has been regarded as essential tool for structure elucidation in variable scientific field as like organic synthesis, natural product and macro protein research. Also NMR can be applied for defining dynamic behavior like ligand and receptor binding. One of advantage of research with NMR is that to be great confident to confirm structure and the measured sample could be recovered. Nevertheless NMR also has a weak points than other spectroscopic methods that require a lot of time for interpreting acquired spectrum and running time due to low sensitivity. For last two decade Bruker has developed hardware and software solution for overcome those weak points. In order to overcome low sensitivity Bruker introduced Cryo and Micro diameter probe head technology. And researcher can reduce the time for routine spectrum processing and interpretation works due to lots of introductions in software solutions for quantification, identification and statistics analysis. With four examples, this article describing those new hardware and software solutions in field of recent pharmaceutical research as follows. - New Horizons for NMR in the Biopharmaceutical Industry - The development and application of solid-state NMR spectroscopy (SSNMR) in pharmaceutical analysis - Assisted NMR Data Interpretation in Synthetic Chemistry - Complete Analysis of New Psychoactive Substances Using NMR.

• 한국어류학회지
• /
• 제11권2호
• /
• pp.139-142
• /
• 1999

1998년 6월, 10월에 경상남도 통영군 좌사리제도 부근 수심 10~30 m에서 낚시로 채포한 한국 미기록 어종에 대하여 보고한다. 채집된 개체의 전장은 82.7 mm, 76.9 mm로서 체형은 원통형이며 등 쪽은 연록색 바탕에 불규칙한 갈색 무늬를 가지며 배 쪽은 엷은 황색을 띤다. 눈과 입이 매우 크며, 옆줄은 등지느러미 기저 부근에 위치하며 등지느러미의 줄기부 중앙 아래까지 이어진다. 우리 나라에서는 처음으로 발견된 이 종은 Opistognathidae (후악치과)에 속하고 Opistognathus iyonis로 동정되었으며, 입이 크고 등지느러미에 검은 점을 가진 특징으로서 "흑점후악치"로 명명하고자 한다.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.15-29
• /
• 2014

This article discusses the state of a community forestry program in a protection forest in Indonesia, which has been running for almost two decades. We found that the program did not achieve its objective mainly because of frequent changes in regulations. There are also activities such as: measuring and mapping working area boundaries, drawing up a work plan, planting, maintenance and security, paying royalties to those who harvest forest resources, and submitting annual reports on land use to the district government head, which have not worked as expected. We also found that the major incentives for local people to participate in the program are getting certificates of management and the program's effectiveness in minimizing land-use conflicts. Participants perceived that their major role on the program is to follow farmer-group directives or government rules. To achieve the program's purposes, farmer groups need technical assistance related to protection-forest management and opportunities for financing.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.496-507
• /
• 2010

It is well known that when a high-speed planing craft travels in following seas it experiences long-periodic motions due to low encounter frequency, and it often loses its course keeping stability. Therefore, it is necessary to study the sea-keeping performance and stability of it in the following seas. In this paper, the vertical motions of a planing craft were measured in following regular waves, and the test results were compared with the theoretical results. In the case of the same encounter frequency, non-dimensionalized motion amplitudes become larger as Froude number is higher, and non-dimensionalized motion amplitudes in head waves are larger than those in following waves. The mean values of the motions in following waves are similar to the running attitudes of a craft in calm water at the same Froude number.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• Management Science and Financial Engineering
• /
• 제14권1호
• /
• pp.23-34
• /
• 2008

In this study, we consider stationary waiting times in a Poisson driven single-server m-node queues in series. We assume that service times at nodes are independent, and are either deterministic or non-overlapped. Each node excluding the first node has a finite waiting line and every node is operated under a FIFO service discipline and a communication blocking policy (blocking before service). By applying (max, +)-algebra to a corresponding stochastic event graph, a special case of timed Petri nets, we derive the explicit expressions for stationary waiting times at all areas, which are functions of finite buffer capacities. These expressions allow us to compute the performance measures of interest such as mean, higher moments, or tail probability of waiting time. Moreover, as applications of these results, we introduce optimization problems which determine either the biggest arrival rate or the smallest buffer capacities satisfying probabilistic constraints on waiting times. These results can be also applied to bounds of waiting times in more general systems. Numerical examples are also provided.

• Korean Journal of Acupuncture
• /
• 제23권2호
• /
• pp.29-38
• /
• 2006

Objectives & Methods: This study was aimed to investigate denomination and distribution of fifteen main collaterals through oriental medicine literature. Results & Conclusions: 1. Kyung-maek-pyoun(經脈篇) of Yeong-chu (靈樞; divine pivot) says that fifteen main collaterals (十五絡脈) consist of main collaterals of the twelve regular meridians (十二經脈), Conception Channel (任孤), Governor channel (督脈) and great collateral of the spleen(脾之大絡). While chapter 26 of Nan-gyung(難經; Classic of difficulty) says that Yin-heel & Yang-heel channels are included instead of Conception channel(任脈) and Governor Channel (督脈). what is explained in Yeong-chu (靈樞; divine pivot) is considered more proper. 2. Great collateral of the stomach (胃之大絡 ) has been considered as one of the main collaterals, resulting in an opinion of sixteen main collaterals. We speculate that this is a wrong interpretation of Pyoung-in-gi-sang-lon(平人氣象論 ) of So-mun(素問). 3. Gumi (CV1) is more resonable than Hoeeum(CV14) for the Connecting point of Conception Channel(任脈) 4. Kyung-maek-pyoun (經脈篇) of Yeong-chu (靈樞; divine pivot) did not mention that the collateral of Hand Jueyin (手厥陰絡版) was running to Hand Shaoyang(手少陽經脈), which is considered to be omitted by mistake. 5. Fifteen main collaterals are mostly distributed on the legs and arms, while some are distributed in the internal organs, chest, abdomen, as well as head and five sensory organs.