• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.17-24
• /
• 2015

With the rapid growth of Information technology and up-to-date wireless network application technologies, huge and various types of data are produced in every moment, the value and significance of the analysis techniques using big data are increased recently. Big data, which were useless since they were too huge to manage in the past, enables us to get new inspirations and values in various practical application areas through the development of big data computing devices and analytic tools. Nowadays, however, it is true that most of the big data are still wasted without properly analyzed and used. In the long run, the preliminary stipulations for finding inspirations and extracting new values from big data are securing big data analysis and application techniques to process big data efficiently. In this paper, we study accurate data analysis techniques and data process technologies those are able to extract needed inspirations and values from big data efficiently, then design the smart application that adopts these techniques practically.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.8-17
• /
• 2008

Wrenching climatic changes due to ecocide and global wanning are producing a natural disaster. Coastal zones have been damaged by typhoons and accompanying storm surges. Severe waves, and destruction of the environment are adding to the severity of coastal disasters. There has been an increased interest in these coastal zone problems, and associated social confusion, after the loss of life and terrible property damage caused by typhoon Maemi. Especially if storm surges coincide with high ticks, the loss of life and property damage due to high waters are even worse. Therefore, it is desirable to accurately forecast not only the timing of storm surges but also the amount water level increase. Such forecasts are very important from the view point of coastal defense. In this study, using a numerical model, storm surge was simulated to examine its fluctuation characteristics for the coastal area behind Masan Bay, Korea. In the numerical model, a moving boundary condition was incorporated to explain wave run-up. Numerically predicted inundation regimes and depths were compared with measurements from a field survey. Comparisons of the numerical results and measured data show a very good correlation. The numerical model adapted in this study is expected to be a useful tool for analysis of storm surges, and for predicting inundation regimes due to coastal flooding by severe water waves.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.248-256
• /
• 2021

Now that we're in the big data era, data has taken on a new significance as the storage capacity has exploded from trillion bytes to petabytes at breakneck pace. As the use of cloud computing expands and becomes more commonly accepted, several businesses and institutions are opting to store their requests and data there. Cloud storage's concept of a nearly infinite storage resource pool makes data storage and access scalable and readily available. The majority of them, on the other hand, favour a single cloud because of the simplicity and inexpensive storage costs it offers in the near run. Cloud-based data storage, on the other hand, has concerns such as vendor lock-in, privacy leakage and unavailability. With geographically dispersed cloud storage providers, multicloud storage can alleviate these dangers. One of the key challenges in this storage system is to arrange user data in a cost-effective and high-availability manner. A multicloud storage architecture is given in this study. Next, a multi-objective optimization problem is defined to minimise total costs and maximise data availability at the same time, which can be solved using a technique based on the non-dominated sorting genetic algorithm II (NSGA-II) and obtain a set of non-dominated solutions known as the Pareto-optimal set.. When consumers can't pick from the Pareto-optimal set directly, a method based on Principal Component Analysis (PCA) is presented to find the best answer. To sum it all up, thorough tests based on a variety of real-world cloud storage scenarios have proven that the proposed method performs as expected.

• Journal of the Korean Home Economics Association
• /
• v.18 no.4
• /
• pp.65-73
• /
• 1980

The purpose of this study is ti find out a desirable way to stability and improvement of household economy by studying the changes of consumption level and consumption pattern of urban salary and wage earners' households during the years from 1970 to 1978. For this study, "Annual Report on the Family Income and Expenditure survey" (Published by the Bureau of Statistics, Economics Planning Board) has been used as basic material, and the methods of analysis used here are the time series analysis. We have gained the results as follows: 1) From 1970 to 198, the total income level increased at the rate of 416.2% in nominal price, but only 74.4% in reql price, while the total expenditure level showed 338.5% increase in nominal price, but its real increased proved only 418.2% in consideration of inflation. APC decreased from 95.1%(in 1970) to 80.7%(in 1978). 2) As for the expenditure pattern for the above mentioned nine years, the rate of food expenditure increased until 1975 under the price influence, but it trended to decease there after on . The rate of housing expenditure showed a gradual increase while that of fuel and light expenditure was on the decrease. The rate of clothing expenditure had been on the decease until 1974 but it began to increase gradually thereafter on. The trend of miscellaneous expenditures was irregularly up and down, educational expences being the first rank among them, Non-living expenditure had been constant until 1974 but it decreased a little after that. From the results it was found that the consumption level of the salary and wage earners' household in all cities from 1970 to 1978 was not practically improved because of rise in prices, nor was the Engel's coefficient and the rate of miscellaneous expenditure changed distinctively. However, as the successive decrease of APC suggests the possibility of economic development, we must try to put stress on economy in consumption and on encouraging. This will help run our household economy in safety and stability.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.1041-1050
• /
• 2001

Control of bone cement volume (PMMA) may be critical for preventing complications in vertebroplasty, the percutaneous injection of PMMA into vertebra. The purpose of this study was to predict the optimal volume of PMMA injection based on CT images. For this, correlation between PMMA volume and textural features of CT images was examined before and after surgery to evaluate the appropriate PMMA amount. The gray level run length analysis was used to determine the textural features of the trabecular bone. Extimation of PMMA volume was done using 3D visualization with semi-automatic segmentation on postoperative CT images. Then, finite element (FE) models were constructed based on the CT image data of patients and PMMA volume. Appropriate material properties for the trabecular bone were assigned by converting BMD to elastic modulus. Structural reinforcement due to the changes in PMMA volume and BMD was assessed in terms of axial displacement of the superior endplate. A strong correlation was found between the injected PMMA volume and the area of the intertrabecular space and that of trabecular bone calculated from the CT images (r=0.90 and -0.90, respectively). FE results suggested that vertebroplasty could effectively reinforce the osteoporotic vertebra regardless of BMD or PMMA volume. Effectiveness of additional PMMA injection tended to decrease. For patients with BMD well lower than 50mg/ml, injection of up to 30% volume of the vertebral body is recommended. However, less than 30% is recommended otherwise to avoid any complications from excessive PMMA because the strength has already reached the normal level.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.15-22
• /
• 1998

The goal of this paper is to propose analyzing and evaluating method of power parameters for motor drive system with various experimental graphic screens and numerical results and to develop the proposed system. A developed system is made up 586-PC and DSP board, motor drive system, power parameters analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/ frequency domain. To verify the validity of the proposed system, capacitor run type single phase induction motor and thyristor speed controller is used for analyzing. Power and harmonic parameters of motor drive system is analyzed and verified, with varying fire angle of thyristor speed controller, and the proposed approach is to confirm validity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.16-20
• /
• 1973

The most important thing in locating disturbances in optimal rapid traffic singnal control is to collect information cocerning toraffit flow by means of a detection method. In order to set up an optimal traffic singnal period, the analysis of a delay time phenomena in the signal period must also be considered. In fact, each of the distributed traffic quantities on the road are not similar factors in view of speeds and distances of succeeding cars. The causing factors are analyzed by the method of control engineering analysis, and they are coincident with disturbance. Thus distubances cause errors. Distubances are fuctions of time, and are classified into three conditions: Natural road state and weather are the first. The second is structures and function of vehicles, and the third is inducedbydrivers. This thesis deals with the last two cases except the first one for maximum utilization of the existing road state and weather conditions. The first condition remains constant, and then there exist some relations between vehicles and drivers. In the long run, it can be shown that the scheme for minimizing whole errors in the optimal traffic signal time setting is definitely presented.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.81-94
• /
• 2005

This study is aimed at giving the basic information for individual farm households to make decisions for optimizing their farm sizes and for the government to implement farm size optimization policies through the identification of combinations among rice production factors in plain areas like Cheolwon district and the suggestion of the optimal farm sizes of individual farmers based on the scale of economy calculated. The data of agricultural production costs of 50 rice farmers in the plain area which is located in Dongsong-eup Cholwon district, Kangwon province were used in the analysis. The 'translog' cost function among various methods which is a flexible function type was adopted to calculate the scale of economy in rice production. Seemingly unrelated regression(SUR) method was used in forecasting functions and processing other statistics by SHAZAM which is one of the computer aid program for quantitative econometric analysis. In conclusion, the long-run average cost(LAC) curve showed 'U-shape' which was different from 'L-type' one which was shown in the previous studies by others. The lowest point of the LAC was 9.764ha and the concerned production cost amounted to 633 Won/kg. Based on these results, it have to be suggested that around 10 ha of paddy is the target size for policy assistances to save costs under the present level of farming practices and technology. The above results show that the rice production costs could be saved up to 10ha in Cheolwon plain area which is a typical paddy field. However, land use, land condition, land ownership and manager's ability which may affect scale of economy should be considered. Furthermore, reasonable management will have to be realized by means of labor saving technology and cost saving management skill like enlargement of farm size of rice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4532-4541
• /
• 2013

With speed up of railway, the demand for safety of the railroad transportation is on the increase in Korea's conventional railways. In additions, freight trains with heavier axle load are required to run conventional railways. In order to solve these requirements, the increase of rail weight and the application of long rail system have been underway in conventional railways. However, the research on ties that is absolutely influencing the track stiffness in ballasted tracks has not been much progress. In this paper, the new H-typed tie is developed to increase the track stiffness and reduce the track irregularity. And from the structural analysis by FE program, the intial design drawing of the new H-typed tie is proposed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.