• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.169-177
• /
• 2018

Twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin have been developed computationally for 3,000 TEU container ship through parametric study. The objective function is to minimize delivered power in model scale. Design variables are twisted angle, rudder bulb diameter and fin angle. The governing equation is Reynolds averaged Navier-Stokes equations in an unsteady turbulent flow and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. The calculation was carried out in towing and self-propulsion conditions at design speed. The sliding mesh technique was employed to simulate the flow around the propeller. Form factor is obtained from the towing computation. Self-propulsion point is obtained from the self-propelled computations at two propeller rotating speeds. The delivered power due to the designed twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin are reduced by 1.1%, 1.6%, and 2.0%, respectively.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.419-426
• /
• 2018

Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.381-387
• /
• 2020

According to the increase of concern for environmental problems, the energy saving becomes an important issue because it is one of the most effective methods of decreasing CO2 which is major environmental problem. In the present study, the post device after propeller related with rudder has been focussed. Recently the full-spade twisted rudder has been frequently used not only to increase the efficiency but also to remove the cavitation risk on leading edge. In addition to that the rudder bulb is also applied to the rudder to increase the propulsion efficiency as well as to minimize the cavitation erosion risk around twisting part. The parametric study has been conducted for investigating the optimum configuration of twisting rudder with bulb by CFD. The present optimization has been applied to the KVLCC2 full-body ship. The verification of the computed results is also expected to be conducted by the comparison with experimental results in the near future.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.65-79
• /
• 1994

본 연구에서는 선미벌브의 채택이 유체력 특성 및 조종성능에 미치는 영향에 관해서 실험적으로 고찰하였다. 연구방법으로서는 일반선미 형상과 선미벌브 형상을 가지는 각각의 모형선을 공시선으로, 회류수조에서 조종성 관련 구속모형시험을 실시하여 양 선형의 차이에 기인하는 유체력 특성과 조종성능을 비교, 검토하였다. 연구 결과, 선미벌브를 채택함으로써 침로안정성은 나빠지지만 선회력이 향상됨을 확인하였고, 이러한 조종성능의 특성과 유체력 특성과의 상관관계를 규명하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.715-722
• /
• 2014

Three twisted rudders fit for large container ships have been developed; 1) the Z-twisted rudder that is an asymmetry type taking into consideration incoming flow angles of the propeller slipstream, 2) the ZB-twisted rudder with a rudder bulb added onto the Z-twisted rudder, and 3) the ZB-F twisted rudder with a rudder fin attached to the ZB-twisted rudder. The twisted rudders have been designed computationally with the hydrodynamic characteristics in a self-propulsion condition in mind. The governing equation is the Navier-Stokes equations in an unsteady turbulent flow. The turbulence model applied is the Reynolds stress. The calculation was carried out in towing and self-propulsion conditions. The sliding mesh technique was employed to simulate the flow around the propeller. The speed performances of the ship with the twisted rudders were verified through model tests in a towing tank. The twisted versions showed greater performance driven by increased hull efficiency from less thrust deduction fraction and more effective wake fraction and decreased propeller rotating speed.

• 대한조선학회논문집
• /
• 제35권3호
• /
• pp.38-45
• /
• 1998

본 논문에서는 계열 모형시험을 통하여, 길이/폭 비가 작은 컨테이너선의 조종성능에 미치는 선미 부가물, 타 및 선미형상의 효과에 대해서 조사 연구되었다. 타, 선미부가물과 선미형상을 변화시키면서 각 경우에 대하여 타 단독시험과 PMM 시험이 수행되었다. 실험적으로 구한 유체력 미계수와 일본에서 개발된 MMG 수학모형을 사용하여 조종성능 해석을 수행하였다. 그 결과 선미형상의 변화와 선미벌브 밑부분에 부가물을 부착시키는 것이 불안정한 선박의 방향안정성을 향상시키는데 있어 가장 효과적이었다.

• 한국항해학회지
• /
• 제21권2호
• /
• pp.11-17
• /
• 1997

In this paper, we studied to improve Inoue's[1] and Kijima's[2] model used to predict ship's manoeuvrability in initial design stage. To perform this work, we had PMM(Planar Motion Mechanism) test and rudder open water test for 12 Models of low-speed blunt-ship which have horn type rudder and bulb in afterbody. Using MMG(Mathematical Modelling Group) model, we analyzed hydrodynamic and MMG experimetnal coefficidnts used to search sensitivities and to estimate ship's manoeuvrability, adn the results are performed by the regression analysis of principle parameters. We varified them to analyze ship's manoeubbrability , had simulate manoeubrability to check revised MMG model and compared them wiht Inoue's method. the result of PMM test and sea trial. Then it is found that the revised method can predict the maneuverability more accurately even for an unstable ship.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.1-7
• /
• 2015

최근에 CO2 배출에 대한 환경 규제가 마련되었고, 연료유 가격은 계속해서 상승하고 있다. 이런 상황들을 극복하기 위해 연료소모량을 감소시키고 추진효율을 개선한 에너지 저감 추진장치들이 계속해서 개발되고 있다. 본 논문에는 핸디형 산적화물선에 적용한 PBCF, SCHNEEKLUTH duct, 비대칭 러더 벌브, Mewis duct의 성능 실험을 서술하였다. 그 결과, SCHNEEKLUTH duct가 다른 에너지 저감 장치들에 비해 연료소모량 절감과 추진효율의 향상 측면에서 더 효과적이었다. 또한 SCHNEEKLUTH duct가 거주구 진동에도 효과가 있음을 확인하였다. 그리고 연료소모량은 주기관 de-rating을 통해서도 절감할 수 있었다.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.