• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.515-524
• /
• 2017

An investigation was conducted to evaluate the hygienic status of 53 high school foodservice systems in Gyeonggi province by using hygiene management guide checklist, ATP bioluminescence assay of food utensils were conducted during process. The 5 hygiene management guide checklist groups about personal hygiene, cooking facilities control, cross contamination control, cook and storage control, management control were checked by experts and had good grades but there were some inadequate behaviors on observation. Total cleaning levels were inadequate, including hand, rubber gloves, aprons, knives, food tray, machine and instruments. The possibility of cross contamination is also noted in handles for refrigerators, ovens, food dryers, hand washing. It was also noted that there were too much work on the nutritionist and cook, additional personnel need to be added. lack of space, deterioration of facilities were identified in some high school foodservice systems. ATP bioluminescence assay was conducted on surface of food facilities, ATP ranged $1,393{\pm}5,041.2RLU$ on yellow gloves, $244{\pm}258.7RLU$ on pink gloves, $3,780{\pm}11,418.6RLU$ on apron, $49,056{\pm}62,831.4RLU$ on refrigerator grip, $41,422{\pm}61,259.8RLU$ in oven, $31,407{\pm}41,344.9RLU$ on hand cleaning board.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.384-390
• /
• 2009

Roll-to-roll forming process is one of important metal processing technology because the process is simple and economical. These days, with these merits, roll-to-roll forming process is tried to be employed in manufacturing the circuit board, barrier ribs and solar cell plate. The solar cell plate may have millions of patterns, and the analysis of forming considering all the patterns is impossible due to the computational costs. In this study, analyses are carried out for various numbers of patterns and the results are compared. It is shown that the analyses results with four row patterns and twelve row patterns are same. So, it is considered that the analysis can be carried out for only four rows of pattern for the design of incremental roll-to-roll forming process. Also formability is analysed for various number of mesh, protrusion shapes and forming temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.103-110
• /
• 2008

In terms of electrical safety, environmental impact assessment and revision of domestic regulation are needed for the electric facilities. In this paper, risk of electric facilities is assessed by the spot measures and analysis in dust generation area. Adhesion dust in a surface of insulated materials cause electrical accidents. In a mechanism of these accidents, when the dust lie on electric facilities, a leakage current is flowed and the surface of insulated material is carbonized. Hereafter, electrical fire is generated due to Joule's heat. As the results, dusts are found in protection devices or panel board and sampled dusts vary in sampled amounts and conductivity severally. For the most part, sodium is detected but zinc and calcium are detected in case of reclaimed rubber factory by the ICP-AES(Inductively Coupled Plasma-Atomic Emission Spectroscopy). In a sewerage, the ingredients such as sodium, magnesium, iron, calcium, aluminium, etc are detected uniformly. So that, results of the spot measures and analysis of dusts are become the important data for the assessment of electrical hazard in dust generation area.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.165-176
• /
• 2021

To solve environmental problems, research and efforts are required to reduce leather waste that is generated in large quantities during the leather manufacturing process. Leatherboard is a plate-like material that is made by crushing leather waste, such as trimming or shaving scraps and mixing fibers, pulp, rubber, and adhesives. The aim of this study is to provide basic data on the localization of leatherboard manufacturing technology for outsoles, which are increasingly in demand due to their excellent performance and price competitiveness. Interviews with experts and related organizations were conducted to investigate the related global technology trends. Also, the performance of three products that can be used as reference materials were evaluated and compared. As part of the research and efforts to reduce the amount of leather waste generated, high-performance materials using leather waste were developed and commercialized by major western companies. In Korea, various efforts have been made since 2000, and some companies have produced leatherboard for interior uses. However, the amount of waste recycled relative to that generated is not large due to the limited demand. Natural leather soles perform better than leatherboard soles in all evaluation aspects. In the case of leatherboard, performance varied by manufacturer. German products showed flexibility resistance and dimensional stability, thereby meeting performance requirements. However, abrasion resistance and cleavage resistance were slightly below the required performance standards, and research and development is needed to improve performance in those areas. Currently, it is impossible to evaluate the performance of domestic products due to underdevelopment. However, if the development of process technology continues based on the performance evaluation results of the best leatherboard in the shoe industry, materials for outsoles will be able to be produced domestically with prices competitiveness while realizing natural leather materials performance to some extent.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.284-289
• /
• 2011

Prismatic reflective sheets were prepared using microprisms, and their retroreflection and structural properties were investigated and compared with encapsulated lens type reflective sheets based on glass beads. As prepared, the prismatic reflective sheets show well arranged array of microprisms. The arrangement of glass beads in encapsulated lens type reflective sheets is also found to be uniform without any cracks. However, during the coating process of the PET layer, the beads are coming out and the gaps are formed due to the application of high pressure. Even though the preparation method for reflective sheets based on microprisms is similar to that of reflective sheets based on glass beads, the method is relatively simple and cost effective, and also needs less time. Prismatic reflective sheets show higher coefficient of retroreflection from all entrance angles compared to reflective sheets based on glass beads. The results prove that the prismatic reflective sheets can be used for preparing the traffic sign boards to secure a clear view.

• Korean Business Review
• /
• v.11
• /
• pp.277-293
• /
• 1998

The purpose of this study is to analyse the overall relationship between the advertisement expenses and the two major indicies of business performance, that is, the total amount of sales and the discipline have contrasted the expenses for commercial advertisement with the total amount of sales or with the business performance, respectively, utilizing data on a specific product observed through 3 to 5 years. This study attempts to enlarge the scope of observation and the content of analysis. In order to attain the purpose of this study, the rate of increase in the advertisement expenses is taken as the independent variable and the two major indicies of business performance, the total amount of sales and the resultant interest, as the dependent variables. Business companies or firms which have continually been listed on the board of Korea Stock Exchange for 14 years, from 1982 to 1995, were grouped into four major business categories; 1)Food and beverage industries, 2)Fiber, clothings, and leather industries, 3) Medicine, chemistry, oil, coal, and rubber industries, and 4) Assembled mechanics and metallurgy, machinery, and maintenance industries. Utilizing the KIS-DATA, compiled by Korea Credit Evaluation, Ltd., 30 to 40 samples of business companies or firms were randomly selected from each category. Finally 125 samples were selected and put into regression analyses and follow-up tests by appropriate statistical models, in order to verify if there were any noticeable correlations. The final result obtained through the afore-mentioned research method shows that the amount of advertisement expenses has strong correlations with the amount of sales and the resultant interest. Viewed by business category, in the case of fiber, clothings, and leather industries, the relationship turned out to be significant only with the rate of increase in the total amount of sales, while, in the case of food and beverage industries, the rate of increase in the total amount of sales showed a negatively significant correlations.