• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.63-74
• /
• 2003

The first objective of this study is to investigate and analyze the construction of TUTU and secondly, to propose a systematic research background on a sewing method of TUTU. The final objective is to provide the exquisiteness and the comfort for customer when wearing a stage costume. The research method to investigate the TUTU construction in detail is by renting or buying three major TUTU brands, which are selling in Korea. The results of this study can be summarized into four categories. Firstly, the Bustier composes into 8 to10 patches, and the external material or accessory differs by the work of art and its characteristics. Moreover, the cotton is used for the inner material. which depends on dancer's vital activities. Secondly, a skirt layer ranges from 6 to 12 layers with laces. In addition, the gather or the pleats is used to form a crease. Thirdly, lace or cotton is the material used for culottes because it is stretchy and lightweight. For the waist part. a rubber band is used since its wearability plus functionality. Lastly, an adjusting part for a stage costume varied for each dressers physical feature and can be corrected with inner hems together a hook, a thread loop or a zip. In conclusion, the results of this study can provide the quality improvement for TUTU and furthermore can propose a framework for an understanding and a practical use of TUTU construction.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.1
• /
• pp.139-146
• /
• 2002

This study deals with the characterizing and the application like as insulation materials in the joint part in concrete surface layer and waterproofing sheet especially for roof slabs. Using steel materials and butil-rubber tape to band waterproofing sheet and concrete surface together before this waterproofing system will be applied. It can be expected to both the curability and the watertightness by coating poly-urethane 2 or 3 times with sheet surface. Therefore this waterproofing system can be possible to protect water without the damage when vapor is going out from concrete and without air pockets because of the difference temperature inside and out. This system particularly consists of air bents and elastic waterproofing sheet considering the physical damage while water can cause purely physical damage. This system is one of the most efficient ways of waterproofing system without air pocket.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.35-51
• /
• 2023

This study used text mining to extract 2,842 keywords from 7,397 product names and organized them into categories in order to analyze the characteristics of keywords appearing in the product names of jeans after 2020. The item category included denim and Chungbaji [청바지], and Ilja [일자], while the silhouette category included wide and bootcut. In addition, high-waist and banding comprised the making sector, and the materials category consisted of napping, spandex, and soft blue. Denim surpassed the others in frequency, co-occurrence frequency, and centrality, and co-appeared with various other keywords. Also, the co-appearance of item and silhouette was prominent, and there were many keyword combinations that showed characteristics related to (a) high waist; (b) hemline detail; (c) rubber band; and (d) partial tearing. Furthermore, idiom expressions such as 'slim fit' and 'back tearing', which were not highlighted in the co-occurrence frequency, were additionally confirmed through correlation. Therefore, the product name analysis effectively identified the detailed characteristics of the silhouette and the making of jeans preferred by consumers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.249-270
• /
• 1993

For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.396-408
• /
• 2023

The purpose of this study was to compare the proximal surface contour, size of contact area, and volume difference before and after restoration in artificial teeth of primary molars during proximal composite resin restoration using different matrix systems. Four types of artificial teeth were restored with composite resin using sectional matrix systems-Palodent V3 Sectional Matrix System and myJunior Kitand a circumferential matrix system-Tofflemire Matrix System-and modeled threedimensionally for analysis. When sectional matrix systems were used, there was a higher probability of concave proximal surface contour and simultaneously greater contact area and volume. This is attributed to the dead soft properties of the matrix band used in sectional matrix systems, which can lead to deformation of the band and hence an excessive amount of resin applied around the contact point. Additionally, the rubber wedge in the sectional matrix system may not help the matrix band fit into the cavity. Therefore, based on the findings of this study, morphological aspects need to be carefully considered for proximal composite resin restoration of primary molars using sectional matrix systems.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.565-571
• /
• 2023

With the introduction of the post-verification system, the measurement of floor impact noise performance on-site has become mandatory, and the evaluation method has changed. To track the performance changes since the policy implementation, research is needed on how the characteristics of heavyweight impact sound change according to the varied evaluation method. In this study, we analyzed the contribution rate of the frequency band-specific sound pressure level on the single-number quantity for a multi-family housing unit with the same floor plan and floor structure, comprising 59 households, based on the changed impact sources and evaluation indicators. It is difficult to compare simply because the method of calculating contributions by frequency band according to the single-day evaluation is different, but the average contribution rate of 63 Hz was 80.8 % in the evaluation method before the introduction of the post-confirmation system (Tire measurement and evaluated as L'_i,Fmax,AW), and the average contribution rate of 125 Hz was 19.2 %. The current evaluation method (rubber ball measurement and evaluation as L'_iA,Fmax) shows that the contribution rate has decreased to 33.1 % on average at 50 Hz ~ 80 Hz, 58.7 % on average at 100 Hz ~ 160 Hz, 6.9 % on average at 200 Hz ~ 315 Hz, and 1.3 % on average at 400 Hz ~ 630 Hz. This result is a case analysis for the target apartment house, and it is necessary to analyze measurement data for more diverse apartment houses.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.61-86
• /
• 1990

To study the effect of prostglandin $E_2$ and evening primrose oil on orthodontic tooth movement in rats, one hundred and sixty rats were divided into four groups of 40 rats each. One group, injected with saline on the palate subperiosteally, served as a control group. A second and third group were injected subperiosteally on the palate with $PGE_2$ $10{\mu}g$ and evening primrose oil 10mg respectively. The fourth group was given indomethacin $20{\mu}g/m{\ell}$ orally by water bottle. The maxillary first molar was moved mesially from the incisors using a 50gm force rubber band. In each group at the 1, 2, 3, 5, and 7th day, 4 rats were examined by light microscope, and 4 by electron microscope. The obtained results were as follows: 1. Osteoclastic activity was maximum at the 3rd day in the $PGE_2$ group on the interradicular alveolar bone of the first molar, followed by the evening primrose oil group, control group, and indomethacin group. 2. Root resorption and vacuolar changes were maximum in the $PGE_2$ group. 3. At the 3rd day of the $PGE_2$ group, the osteoclasts showed well developed ruffled borders and clear zones. At the same day, the evening primrose oil group also showed well developed ruffled borders and clear zones, but less than the $PGE_2$ group. 4. At the 3rd and 5th day of the $PGE_2$ group, fibroblasts showed phagocytized fragmented collagen fibers in the cytoplasm. At the 7th day of the $PGE_2$ group, fibroblasts showed collagen fibers forming at the cell membrane surface.

• Journal of the Korean Society of Costume
• /
• v.66 no.6
• /
• pp.32-45
• /
• 2016

The purpose of this study is to propose changes that can be made to improve nurse uniforms in terms of outfit and functionality based on actual wearing conditions and nurse's preference. The proposed nurse uniform was composed of a blouse and pants. The design was as follows: the blouse had short set-in sleeve with China collar, a princess line, and it came down to middle hip. Armhole action pleats and back inverted pleats were embedded for convenient arm movements. The pants waist had a rubber band at the back waist, and the crotch length and the knee width were increased for activity. To make the pocket more accommodative, separate pocket slots treated with silicone were added to prevent belongings from coming out of the pocket. The pink tone of the uniforms, as well as the stripes on the blouses and spandex incorporated pants were based on nurses' preference. the nurse uniforms were produced after measuring the size of women in the age of 25 to 29, and the uniform patterns were corrected after two wearing experiments. Wearing test was examined in terms of appearance and functionality. For appearance, experts gave the uniforms a mean rating of 4.30, and nurses gave a mean rating of 4.00. Functionality was evaluated in terms of ease of activity and storage aspects. The total mean of ease of activity in nursing service was 4.30, whereas the evaluation of storage in terms of pocket position and convenience was 3.80.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.264-270
• /
• 2008

$\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films were selfassembled using the layer-by-layer method on the reactive of glass slides functionlized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were alternately soaked in the solutions containing $\alpha$-D-mannosyl fullerene[$C_{60}$] and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. $\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 530 nm gradually became more evident as successive layers were added to the films.