• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.464-469
• /
• 2004

Cyclic voltammetry was used for elucidating the electrochemical behavior of Ru-cupferron complex in 1 mM phosphate buffer. The optimal conditions of ruthenium were found to be 1 mM phosphate buffer solution (pH 6.0) containing 0.1 mM cupferron, scan rate of 100 mV/s. By using the plot on the reduction peak currents of linear scan voltammograms vs. ruthenium concentration, the detection limit ($3{\sigma}$) was $1.2{\times}10^{-7}M$.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.265-268
• /
• 1992

Ruthenium(III) unsymmetrical Schiff base complexes, $[Ru(CHBPH-TP)Cl_2]$ and $K[Ru(CHBPH-HB)Cl_2]$ were synthesized, where CHBPH-TP and CHBPH-HB are 5-chloro-2-hydroxybenzophenonethiophencarba aldehydephenylenediimine and 5-chloro-2-hydroxybenzophenonehydroxybenzophe nonephenylenediimine. These Schiff bases were obtained from the reactions of 5-chloro-2-hydroxybenzophenone (CHB) and 2-thiophenecarbaldehyde (TP) or hyroxybenzophenone (HB) and 1,2-diaminobenzene. Elemental analysis, conductivity and infrared studies of the complexes suggest an octahedral geometry around ruthenium. Magnetic moments of the complexes indicate a single unpaired electron in alow spin $d^5$ configuration. The complexes are capable of catalyzing the oxidation of styrene with sodium hypochlorite in the presence of phase transfer agent. Oxidative cleavage of C=C bond is the major reaction pathway to form benzaldehyde for styrene oxidation.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2014

Well-distributed ruthenium (Ru) nanoparticles decorated on porous carbon nanofibers (CNFs) were synthesized using an electrospinning method and a reduction method for use in high-performance elctrochemical capacitors. The formation mechanisms including structural, morphological, and chemical bonding properties are demonstrated by means of field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). To investigate the optimum amount of the Ru nanoparticles decorated on the porous CNFs, we controlled three different weight ratios (0 wt%, 20 wt%, and 40 wt%) of the Ru nanoparticles on the porous CNFs. For the case of 20 wt% Ru nanoparticles decorated on the porous CNFs, TEM results indicate that the Ru nanoparticles with ~2-4 nm size are uniformly distributed on the porous CNFs. In addition, 40 wt% Ru nanoparticles decorated on the porous CNFs exhibit agglomerated Ru nanoparticles, which causes low performance of electrodes in electrochemical capacitors. Thus, proper distribution of 20 wt% Ru nanoparticles decorated on the porous CNFs presents superior specific capacitance (~280.5 F/g at 10 mV/s) as compared to the 40 wt% Ru nanoparticles decorated on the porous CNFs and the only porous CNFs. This enhancement can be attributed to the synergistic effects of well-distributed Ru nanoparticles and porous CNF supports having high surface area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.296-296
• /
• 2013

Supercapacitor is a capacitor with extraordinarily high energy density, which basically consists of current collector, active material and electrolyte. Ruthenium oxide ($RuO_2$) is one of the most widely studied active materials due to its high specific capacitance and good electrical conductivity. In general, it is known that the coating of $RuO_2$ on nanoarchitectured current collector shows improved performance of energy storage device compared to the coating on the planar current collector. Especially, the surface structure with standing coaxial nanopillars are most desirable since it can provide direct paths for efficient charge transport along the axial paths of each nanopillars and the inter-nanopillar spacing allows easy access of electrolyte ions. However, well-known fabrication methods for metal or metal oxide nanopillars, such as the process using anodize aluminum oxide (AAO) templates, often require long and complicated nanoprocess.In this work, we developed relatively simple method fabricating indium tin oxide (ITO) nanopillars via sputtering. We also electrodeposited $RuO_2$ nanoparticles onto these ITO nanopillars and investigated its physical and electrochemical properties.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.368-372
• /
• 1999

The suggested electrode structure of MOCVD-Pt/sputtered-Ru/polysilicon has an excellent adhesion with increasing annealing temperatures and shows a stable electrode structure up to $600^{\circ}C$. However, the ruthenium used for barrier layer increased the roughness of platinum bottom electrodes because ruthenium diffused through the Pt bottom electrode and reacted with oxygen during the annealing above $700^{\circ}C$. The surface roughness increased the resistivity of Pt bottom electrodes. The resistivity of samples annealed at $600^{\circ}C$ was about $13\mu$Ω.cm. The electrode structure was possible to apply for ferroelectric thin film integration of semiconductor memory devices.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.643-648
• /
• 1995

Cyclic voltammetric method is used to survey microscopic environments which take place at the surfactant-modified carbon electrode when the hydrophobic and hydrophilic environments of $Ru(ph){_3}^{2+}$(tris 1,10-phenanthroline ruthenium(II) chloride) is created by the addition of anionic surfactant, sodium dodecyl sulfate(SDS). Critical micelle concentration(CMC) of SDS in $Ru(ph){_3}^{2+}$ measured by cyclic voltammetry(CV) is in aggrement with that by surface tensiometry. Influence of the concentration of supporting electrolyte at surfactant-modified carbon electrode is investigated.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.46.2-46.2
• /
• 2021

Presolar silicon carbide (SiC) grains form around in the envelopes of asymptotic giant branch (AGB) stars by satisfying C/O>1 which is an optimal condition for SiC grains to condense in the stellar outflows. Ruthenium (Ru) isotopes are locked into the SiC grains during the condensation of SiC grains. We investigate the isotopic compositions of Ru in the stellar winds by using the NuGrid data, which are obtained by nucleosynthesis calculations during the stellar evolution. We compare the isotopic compositions of Ru obtained from the NuGrid data with measurements and the predictions obtained from different codes. Our results present a piece of evidence that SiC grains in the presolar system came from low-mass and low-metallicity AGB stars, also confirming that they were not from massive stars. We also suggest a new scenario in which the total stellar yields are also considered because SiC grains can condense during the collapse of molecular clouds.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.3-11
• /
• 2012

Some methods used for the recovery of osmium and ruthenium from primary/secondary sources are reviewed. Both Ru and Os could form volatile oxides which enable their separation from the other PGMs by distillation as a traditional method. In hydrochloric acid solution, they also form chloro-complexes with different valence states. Amines or amine based mixture have been used to extract Ru. Solvating extractants are employed to separate Ru and Os. The detailed extraction and stripping conditions of several solvent extraction processes have been reviewed. As an alternative to solvent extraction, solid-liquid method can be applied to recover trace amount of these metals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.851-852
• /
• 2010

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.93-97
• /
• 2003

The electrode for a supercapacitor was prepared using an amorphous ruthenium oxide, which was synthesized from ruthenium trichloride hydrate$(RuO_2{\cdot}nH_2O)$. A supercapacitor was assembled with an electrode of ruthenium oxide material on a current collector of tantalum, and an electrolyte of 4.8 M sulfuric acid. The result of the AC impedance analyses on $Ta/H_2SO_4(4.8 M)/Pt$ cell showed that tantalum was stable at the potential range of $0.0\~1.1V(vs. SCE)$. Therefore, Ta film could be used the supercapacitor as a current collector. The irreversible hydrolysis in the supercapacitor occurred over ca. 1.0V(vs.SCE) when the supercapacitor was protonated to 0.5V(vs. SCE). The supercapacitor protonated to 0.5V(vs.SCE) showed good electrochemical properties when it was tested at the potential range of 1.0V in the charge-discharge test. The potential range of the electrodes including the positive and the negative electrode was varied between -0.004 and 0.995V(vs. SCE). The potential ranges of the positive and the negative electrode were $-0.004\~0.515V(vs.\;SCE)\;and\; 0.515\~0.995V(vs.\;SCE)$, respectively.