In a previous paper, we have examined the effects of nozzle configuration and jet to jet spacing on the heat transfer of 1 row of circular water jets. In this paper, experiments have been conducted to obtain the effects of nozzle to target plate distances on the heat transfer of 1 row of 3 jets and 1 row of 5 jets. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type. Nozzle to target plate distance H was varied from 16 mm(H/D=2) to 80mm(H/D=10). For fixed value of mass flow rate and nozzle to target plate distance, larger values of average Nusselt number were obtained for the smaller jet to jet spacing. For the array of water jets, the average heat transfer was decreased slightly with increasing nozzle to target plate distance at low jet velocity of $\textrm{V}_{o}$=3 m/s. However, except for $\textrm{V}_{o}$=8 m/s of 1 row of 5 jets, it was increased with increasing nozzle to target plate distance at high jet velocity of $\textrm{V}_{o}$$\geq$6m/s. We proposed to apply the nozzle configuration of maximum average heat transfer to each nozzle to target plate distance for 1 row of 3 jets, and, it was Reverse cone type nozzle for 1 row of 5 jets(Reynolds number$\geq$36000).
마이크로파일의 수평 지지력은 파일의 본 수, 설치 각도와 간격 등 설치조건에 좌우된다. 마이크로파일에 관한 기존 연구는 연직 지지특성에 대한 평가와 효과적인 설치방법의 제안 등에 국한되어 있고, 파괴 모드와 같은 파괴 메커니즘 등에 대한 연구는 거의 없는 실정이다. 또한 대부분의 수평 지지력에 관한 연구도 단열 마이크로파일(1-row micropile)에 관한 것이다. 이에 본 연구에서는 파일의 설치 길이, 각도, 간격 등 설치조건을 달리한 경우 복열 마이크로 파일(2-row micropile)의 거동 및 지지특성을 평가하기 위하여 모형시험을 수행하였다. 모형시험결과, 설치 각도 θ > 0°인 경우(비교차 설치)의 복열 마이크로파일의 수평 지지력은 파일의 간격에 좌우되며, 설치 각도 θ = +30°인 조건이 지지력 증대에 가장 효과적이었다. 또한 설치 각도 θ < 0°인 경우(교차 설치)에는 파일의 간격과 각도에 좌우되며, 설치 각도 θ = -15°인 조건이 지지력 증대에 가장 효과적인 것으로 나타났다.
본 연구에서는 풍화토 지반에 설치된 수평하중을 받는 H-pile 무리말뚝의 하중분담특성 및 상호작용계수(p-multiplier)를 분석하였다. 말뚝의 배열($2{\times}3$, $3{\times}3$), 말뚝의 간격(2D, 4D, 6D), 그리고 지반밀도(상대밀도:40%, 80%)를 고려한 수평재하 실험을 실시한 결과 다음과 같은 결과를 얻을 수 있었다. 무리말뚝내 각각의 말뚝에 작용된 평균수평하중은 말뚝의 수가 감소할수록 평균수평저항력이 증가하는 것으로 나타났다. 말뚝간격과 지반밀도에 따라 단말뚝과 무리말뚝의 p-y곡선을 분석한 결과 말뚝간격이 2D에서 6D로 증가함에 따라 무리말뚝의 상호작용계수값이 느슨한 지반의 경우 0.85~0.94(앞열말뚝), 0.57~0.79(중간말뚝), 0.60~0.71(후열말뚝), 조밀한 지반의 경우 0.76~0.82(앞열말뚝), 0.58~0.73(중간말뚝), 0.53~0.70(후열말뚝)의 값을 각각 나타냈다. 이와같이 단말뚝과 무리말뚝간 상호작용계수는 말뚝간격이 증가할수록 그 값이 증가함을 알 수 있었으며, 또한 앞열의 무리말뚝이 중간 및 후열말뚝들보다 보다 큰 상호작용계수 값을 나타냈다.
In this study, an edible fresh corn harvest testing machine was designed and manufactured. And harvesting performance was analyzed through the field test. The testing machine is of the tractor attached type. It is connected to the tractor PTO shaft to transfer power to the each part of the harvesting machine. And it harvests fresh corn by one row through the processes of cutting, stem crushing, detaching, and collecting. The performance test was performed at PTO speed (540, 750, 1050 rpm, respectively), working speed (0.1, 0.15, 0.2 m/s, respectively), and cropping cultivation (row spacing·hill spacing 70·25 cm, 70·40 cm, 90·30 cm, respectively). The performance test was repeated three times in the 15 m section. The detachment loss ratio, uncollected crop ratio, damage ratio, and harvest ratio were analyzed. As a result of the performance test, it was analyzed that the PTO speed 540 rpm, running speed of 0.1 m/s, and row spacing·hill spacing 70·40 cm were the optimal condition.
An experiment was conducted at Suwanvajokkasikit Research Station, Pakchong, Nakornratchasima, Thailand, to determine the yield and quality of three different grass cultivars intercropped with leucaena (Leucaena leucocephala). The treatments consisted of three grass cultivars (ruzi, dwarf napier and Taiwan A25) as the main plots, planted between leucaena at three row spacings (1, 2 and 4 m width) as the sub plots and leucaena cutting height (10 and 25 cm above ground levels) as sub-sub-plots. Dwarf napier consistently produced more dry matter than Taiwan A25 or ruzi and Taiwan A25 outyielded ruzi. Leucaena yield was highest in the ruzi plot and lowest in the dwarf napier plot. However, yields of grass plus leucaena were highest in the dwarf napier plot and were lowest in the ruzi plots. The difference was due mainly to the grass components. Increasing the spacing between rows of leucaena resulted in a lower leucaena yield but the reverse was true for the grasses. Cutting of leucaena at 10 cm above ground levels depressed yields of leucaena but did not affect the associated grasses. In terms of herbage quality, it was found that the crude protein of leaves and stems of the dwarf napier and Taiwan A25 were higher than that of the ruzi grass. Leucaena gave higher levels of crude protein than all grasses. The phosphorus and potassium levels of all grasses were higher than leucaena. ADF levels were higher in the grasses than in the legumes. Nutrient contents in the leaves and stems of grasses and leucaena were not affected by leucaena spacing and cutting height.
International Journal of Air-Conditioning and Refrigeration
/
제14권2호
/
pp.49-56
/
2006
Heat transfer performances of individual row of two-row fin and tube heat exchangers are experimentally investigated. Tested are four heat exchangers which are geometrically identical with the exception of fin shape, slit or louver, and that the fins between the first row and the second row are connected or separated. The tube diameter and fin spacing of the heat exchangers examined are 7mm and 1.4mm, respectively. All thermal fluid measurements are made using a psychrometric calorimeter. In order to evaluate air-side heat transfer coefficients of individual rows, tube-side water flow rates of individual rows are independently controlled such that the water-side temperature drops in each row remain at $5^{\circ}C$. Frontal air velocity varies in the range from 0.7m/s to 2.5m/s. Heat transfer coefficients are presented in terms of Colburn ${\jmath}-factor$. The results show that the heat transfer coefficient of the upstream row is larger than that for the downstream row at low Reynolds numbers.
본 연구는 식물공장용 체인컨베이어식 조간조절장치를 개발하기 위해 수행하였다. 개발 시스템을 재배작물에 실제로 적용하기 위해 평가 시험하였다. 실험결과, 식물공장에서 수경재배되는 채소의 주간을 조절하는 기술을 제공하였다 작물조간조절단계는 매주 수확하는 것으로 하여 4단으로 설정하였고, 단계별 이송속도는 각각 6.4, 9.6, 12.3, 15.8$cm{\cdot}s^{-1}$이었고, 조간조절량은 각각 101.6, 152.4, 203.2, 254.0mm로 나타났다. 1단계에서 4단계로 작물이 이송되는 동안 작물과 재배 홈통의 무게가 17N에서 935N으로 증가함에 따라 구동축토오크도 $11.7\~33.3N{\cdot}m$범위에서 증가하여 이론토크 값보다 $5.9\~9.8N{\cdot}m$ 더 소요되었으며, 이때의 진행 저하율은 $1.6\~2.1\%$이었다. 재배홈통의 이동소요 시간의 설계 값이 2.26초이고 실측값이 2.24초로 잘 일치한 것으로 나타났다. 조간조절장치는 조간조절량이 설계된 값의 $5%$이내 범주에서 잘 조절되고, 시스템으로도 안정적으로 나타나 식물공장용 조간조절장치로 체인컨베이어식 조간조절장치가 활용될 수 있을 것으로 판단되었다.
담배 품종은 Burley 2001를 공시하여 휴간을 90, 105, 120cm로 하고 주간을 각각 30, 35, 40cm로하여 재식밀도 및 재식거리 Burley종의 수량 및 품종에 미치는 영향을 구명하여 알맞는 재식거리를 구하고자 시험하여 얻은 결과를 요약하면, 1. 간경 및 최대도 등 1주당 생장량은 소식할수록 컸고, 같은 재식밀도에서는 주간을 넓힌 처리에서 더 컸다. 2. 후기생육은 밀직할수록, 같은 재식밀도에서는 휴간을 넓힐수록 완만하였다. 또한 주당 엽면적, 단위 엽면적중은 소식할수록 증가하는 반면 엽면적수는 밀식할수록 증가하였다. 같은 재식밀도에서는 단면적, 단위 엽면적중, 엽면적지수 모두 주간을 넓힌 처리에서 증가하였다. 3. 수광율은 소식할수록 중.본엽에서 더 많아 품종과 정의 상관을 보였으며 착엽각도도 켰다. 동일 재식밀도에서는 주간을 좁히고 휴간을 넓힌 처리에서 주당 생장량이 적으므로 수광율은 증가했으나 착엽각은 좁아서 1주면적당 일사량 이용은 주간을 넓힌 처리보다 더 적을 것으로 본다. 4. 밀식할수록 수량은 증가했으나 품질과 내용성분은 저하였고, 이에 대금은 90$\times$ 40 > 105$\times$ 40cm로 2,700주/10a에서 많았고, 같은 재식밀도에서는 수량, 품종 대금 모두 휴간을 좁히고 주간을 넓힌 처리에서 증가했으나 처리간 유의성이 인정되지 않았다. 이상 결과에서 재식밀도는 2,400~2,700주/10a로 토양비옥도에 따라 가감해야 할 것이고 재식거리는 작업의 성력화를 위해 휴간을 다소 넓힌 105$\times$ 35, 105$\times$40cm로 재식함이 바람직할 것이다.
Generally, in a steel girder and the concrete slab act as a composite structure, the connectors must have adequate strength and stiffness. If there are no horizontal or vertical separations at the interface, the connectors are described as rigid, and complete interaction can be said to exist under these idealized circumstances. In previous study, it was considered that the strength of stud is affected by the stud diameter, height of stud and compressive strength of concrete. The differences between previous study and this study are variables, which are shank diameter of shear connector, the spacing of shear connector, the size of specimen and the row of shear connector. So this paper, as a study on the strength of shear connector with the spacing of shear connector, size of specimen (block-out size), row of shear connector and shank diameter of shear connector resulted from the push-out specimen are conducted with ABAQUS program. It is to investigate the effects of characteristics of these factors. The load-slip relations obtained from the experiments are compared with those of analyses. From these results, the trends of stress are stress estimated and compared with push-out test.
This study was conducted to develop m automatic pot-seedling transplanter for plant factory. The transplanter consists of a gripper, row-spacing control device, nursing tray transfer system, growing trough transfer system, and gripper moving device. The gripper picks up pot-seedling. The gripper moving device moves the gripper between nursing tray and growing-flat. Nursing trays are moved to workspace by the nursing tray transfer system. The growing trough transfer system was developed to move growing trough to workspace. The row-spacing control device was used to adjust the distance between adjacent plants traversely. The results of this study are as follows. The transplanting capacity of the developed transplanter was 7.1 seconds per cycle or 1.18 second per pot-seedling. Successful planting was 98.9% without seedlings and 95.8% with seedlings.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.