• Architectural research
• /
• 제21권1호
• /
• pp.9-20
• /
• 2019

In the spatial configuration of a unit plan, two rules exist: one that governs the arrangement of spaces, and one that controls the design process of generating a unit plan. This study defines space grammar as an integration of the two rules that give birth to a given spatial configuration and as the process of the generation of unit plans. To understand the distinctive features of Indonesian row houses, this study analyzes the unit plans of row houses in new towns of the metropolitan cities of Indonesia, derives a common space grammar from the unit plans, and interprets the sociocultural background that has produced this space grammar. This study employs Seo's (2007a; 2007b) graph-theoretic methodology to analyze the spatial configurations of unit plans along with a topographical approach to systematically illustrate the design process. The guest space was found as the most unique space of Indonesian houses, which cannot be found in other Southeast Asian houses. Kitchen was clearly seperated from the dining and living spaces, following traditional custom. Dining space was found to serve as a circulation center, connecting the entrance, the lving area and the kitchen. This study locates the basic orders of primary space and the design principles that dictate the unique spatial configurations of Indonesian row houses. This study reveals the basic space grammar that underpins the forms of Indonesian row houses, explaining the sociocultural and geo-climatic factors affecting this space grammar and proposing unique characteristics of Indonesian contemporary houses.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.500-509
• /
• 2015

The numerical simulation of two-dimensional moving blade row interactions is conducted by CFD means to investigate the interactions between the front and rear propeller in a stratospheric airship contra-rotating open propeller configuration caused by different rotational speeds. The rotational speed is a main factor to affect the propeller Reynolds number which impact the aerodynamic performance of blade rows significantly. This effect works until the Reynolds number reaches a high enough value beyond which the coefficients become independent. Additionally, the interference on the blade row has been revealed by the investigation. The front blade row moves in the induced-velocity field generated by the rear blade row and the aerodynamic coefficients are influenced when the rear blade row has fast RPMs. The rear blade row moving behind the front one is affected directly by the wake and eddies generated by the front blade row. The aerodynamic coefficients reduce when the front blade row has slow RPMs while increase when the front blade row moves faster than itself. But overall, the interference on the front blade row due to the rear blade row is slight and the interference on the rear blade row due to the front blade row is much more significant.

• 대한수학회논문집
• /
• 제11권4호
• /
• pp.983-996
• /
• 1996

In this paper, we show that $\Vert \xi \Vert_r = \Vert \sum_{i \in I}x_i x^*_i \Vert^{\frac{1}{2}}, \Vert \xi \Vert_c = \Vert \sum_{i \in I}x^*_ix_i \Vert^{\frac{1}{2}}$ for $\xi = \sum_{i \in I}x_i e_i$ in $M_n(H)$, that subspaces as Hilbert spaces are subspaces as column and row Hilbert spaces, and that the standard dual of column (resp., row) Hilbert spaces is the row (resp., column) Hilbert spaces differently from [1,6]. We define operator Hilbert spaces differently from [10], show that our definition of operator Hilbert spaces is the same as that in [10], show that subspaces as Hilbert spaces are subspaces as operator Hilbert spaces, and for a Hilbert space H we give a matrix norm which is not an operator space norm on H.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.259-265
• /
• 2008

This research starts from the questioning of current housing development situation on hilly sites in Korea. It aims to investigate various design techniques of row-rise housing as an alternative housing type on hilly sites. Several generic solutions are proposed by considering the density of dwelling, parking plans, exterior space and access patterns, making full use of geographical features of hilly site and existing facilities. In order to promote development feasibility of proposed plans, the efficiency of the proposed techniques are verified in terms of development density, enhancement of community space, habitability of housing.

• 한국농촌건축학회논문집
• /
• 제15권2호
• /
• pp.25-32
• /
• 2013

The purpose of this study is to analyze the residential space composition and extension of Jeonja-jip and Dureong-jip in Samcheok region. The results of this study are as follows. It appears three residential plan types - Jeonja-jip with Anmaru(a room made of wooden floor), Jeonja-jip without Anmaru and Dureong-jip with Anmaru- in survey region. It was needed the extension of residential space at Jeonja-jip(a house type with two-row rooms which be composed of 田type under one roof) and Dureong-jip(a house type with inner floor which be surrounded by rooms under one roof) because of shortage of sleeping space, working space and keeping space owing to growing large family. The solutions of these shortages will be the extension of space in houses. Jeonja-jip's basic type which is the Kyup-Jip(a house type with two-row rooms under one roof) of 一 type with 6 Kans(Kan, a unit to count room to divided with four posts) is transformed and extended to 田shaped house with 11 Kans toward X-axis orientation. Dureong-Jip's basic type which is ㄱ type with 7 Kans is transformed and extended to the Sekyup-Jip with 9 Kans and the Nekyup-Jip(a house type with four-row rooms under one roof) with 12 Kans toward Y-axis orientation by insertion and addition. Jeonja-jip was developed into Kyup-Jip with front 4 or 5 Kans and side 2 Kans instead of being done into Sekyup-jip or Nekyup-Jip with insufficient day lighting and ventilation problems. Jeonja-jip and Dureong-jip were stronger than any other traditional houses in tendency to reserve Magu(cowshed) and Chikkan(toilet) in a house.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.438-444
• /
• 1993

The circuit board of an electronic equipment were simulated with a vertical channel which had thermal blocks protruded from one of the channel walls. A rought front plate was made of a circuit board attached with short wires to simulate the back side of a printed circuit board. Natural convection experiments were carried out to study the effects of channel space and rough front plate and to find the suitable characteristic value after the fourth row. The effect of a rough front plate was negligble. There were negligible effects of the channel space on the first and second heaters. Heat transfer coefficients after the third row decreased as the channel space decreased. Heat transfer coefficients were almost constant for larger than 20 mm channel space. A characteristic length was suggested to non-dimensionalize Nu and Ra numbers in a vertical channel with protruded heaters. A correlation was obtained using the new characteristic lengths.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.268-273
• /
• 2005

This study was conducted to investigate the specificities of four fulcrum types for geo-statistical analysis of elevation within rice paddy field. In Korea, the spaces between inter-rows and between hills for rice transplanting are 30cm and 11cm to 14cm, respectively. So, the size and shape of fulcrum for field elevation measurement should be considered according to the inter-row and the hill spaces. Four kinds of fulcrum were chosen such as round-shape with 2.5cm diameter, circular-shape with 10cm diameter, 10cm (one third of inter-row space) by 24cm (double of hill space) rectangular-shape, and 20cm (two-thirds of inter-row space) by 24cm rectangular-shape. The resulting descriptive statistics couldn't determine the best fulcrum type to measure the rice paddy field elevation. But the results of geo-statistical analysis could determine the best fulcrum type. In the case of 10cm by 24cm rectangular-shape fulcrum, Nugget and range, meaning measurement error and/or noise, and limit of spatial connection, respectively, were minimum; Q value meaning weight of spatial structure and $r^2$ value were minimum, and residual sum of squares was minimum. It means that 10cm by 24 cm rectangular-shape fulcrum could best describe the rice paddy field elevation.

• 건축역사연구
• /
• 제4권1호
• /
• pp.29-42
• /
• 1995

This study aims at examinating the change of architectural technique in the residential district of Seoktanri(石灘里), and then extracting the restorable types from it. The constructive technique was advanced in the composition of walls and the use of footing. The arrangement of columns was developed to standing them in a row and three rows in the center of interior space. In the light of excavated relics and the position of furnace, the interior space is seperated into cooking-heating, working and storing space. By the difference of height and the slope, the floor is divided into two parts which are low and high. According to the arrangement of column-holes, the types of roofs to be restored are as follows; the gable roof without column-hole, the hipped roof with center-column-holes(中央柱孔) in a row and the gable roof with center-column-holes in three rows.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.634-643
• /
• 2004

In this paper are presented a concept of a new supersonic air inlet, which is designated a Multi-Row Disk (MRD) inlet, aiming at performance improvement under off-design conditions, and results of wind tunnel tests examined performance characteristics of the MRD inlet. The MRD inlet is frequently called ‘a skeleton inlet’ because of its appearance. The performance of a conventional axisymmetric inlet with a solid center body (spike) deteriorates under off-design Mach number conditions. It is due to the fact that total pressure recovery (TPR) governed by the throat area of inlet and mass capture ratio (MCR) governed by an incidence position of an oblique shock from the spike tip into the cowl can not be controlled independently in such air inlet. The MRD inlet has the spike that is composed of a tip cone and several disks arranged downstream of it, based on the experimental fact that several deep cavities on a conical surface have little negative effect on the boundary layer growth. The overall spike length of the MRD inlet is adjustable to the given flight speed by changing space between disks so that a spillage flow can be controlled independently from controlling the throat area. It could be made clear from the result of wind tunnel tests that the MRD inlet improves TPR by 10% compared with a conventional inlet with a solid spike under off-design conditions.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.91-98
• /
• 2017

Performance of a low speed axial compressor is enhanced through a proper configuration of blade row tip injection and casing treatment of groove type. Air injectors were mounted evenly spaced upstream of the blade row within the casing groove and were all aligned parallel to the compressor axis. The groove, which covers all the blade tip chord length, extends all-round the casing circumference. Method of investigation is based on solution of the unsteady form of the Navier-Stokes equations utilizing $k-{\omega}$ SST turbulence model. Extensive parametric studies have been carried out to explore effects of injectors' flow momentums and yaw angles on compressor performance, while being run at different throttle valve setting. Emphasis has been focused on situations near to stall condition. Unsteady numerical analyses for untreated casing and no-injection case for near stall condition provided to discover two well-known criteria for spike stall inception, i.e., blade leading edge spillage and trailing edge back-flow. Final results showed that with only 6 injectors mounted axially in the casing groove and at yaw angle of 15 degrees opposite the direction of the blade row rotation, with a total mass flow rate of only 0.5% of the compressor main flow, surprisingly, the stall margin improves by 15.5%.