• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.270-273
• /
• 2003

The characteristic of constant volume micro combustor was investigated experimentally. The shape of micro combustor was cylindrical and has row aspect ratio or has relatively large diameter compared with chamber height. Diameter and chamber height was varied to investigate the geometric effect of combustor on the flame propagation. Diameter of 15 mm and 7.5 mm was designed while chamber height was designed to be 1mm, 2mm, and 3mm. The effect of initial pressure was also investigated parametrically from 1bar to 3bar. The gas used in this study was stoichiometric mixture of methane and air. The maximum pressure achieved in down scaled combustors was lower than that of conventional combustor because heat loss to wall was dominant as expected. The maximum pressure responded favorably with the change of height of combustor and the initial pressure, the maximum pressure was also increased. The flame propagation was possible when the specific condition was satisfied. Although the quenching distance of stoichiometric mixture of CH4 and Air is 2.5 mm, the flame could propagate even under quenching distance as the initial pressure increased.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.107-113
• /
• 2001

This study is focused on the wave control by economical multi-rowed impermeable submerged breakwaters which need less materials than a one-rowed submerged breakwater. A boundary element method and eigenfunction expansion method based on the Green\`s theorem are appled to analyze the characteristics of wave transformation. Submerged breakwaters are consisted of one and two-row with rectangular section. Wave transformation characteristics are investigated by the various combinations of placement distance and crown water depth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.319-328
• /
• 2000

This paper presents a new design method of the 1 generation wheel bearing unit using a numerical optimization technique in order to increase bearing fatigue life. For calculating the fatigue life, a method of load analysis is studied on the automotive wheel bearing system. The design variables selected are ball size, initial contact angle, number of balls, pitch diameter, pre-load, and distance between ball centers. The method of feasible directions in ADS (Automated Design Synthesis) is utilized to automatically find the optimum design variables. To validate the design method, a computer program is developed and applied to a practical passenger car model. The optimum design results demonstrated the effectiveness of the proposed design method showing that the system life of the optimally designed wheel bearing unit is enhanced in comparison with that of the initial ones within the given available design space.

• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.75-82
• /
• 1998

Autonomous speedsprayer operation was conducted using a fuzzy controller combined with a DGPS. The signal of DGPS receiver and signals of four ultrasonic sensors were processed in real time. The speedsprayer was steered with two levers controlled by two hydraulic cylinders. The fuzzy controller has two inputs; direction of running obtained from the DGPS receiver and distance from trees measured by ultrasonic sensors. The operation times of the hydraulic cylinders were inferred as outputs of the fuzzy controller. Field test results showed that the speedsprayer could be autonomously operated by the developed fuzzy controller including turning operation in the end of the tree row. The ultrasonic sensors contributed a little to performance of the autonomous operation, but the speedsprayer could avoid trees or obstacles in emergent situations with them.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2000

We extended a minimum spanning tree algorithm (Cho et al., 1997) by characterizing the mutually independent cells with maximizing the grouping efficiency referring to few propositions developed by Shu, 1990 in cellular manufacturing system. Each row of the machine-part incidence matrix is regarded as a node in a graph, and a distance function is defined for every pair of nodes. It shows that there are K mutually independent cells in the cellular manufacturing system if only if there are K-1 arcs of length 1 in the minimum spanning tree of the graph, and gives an effective policy for sub-cell formation from larger cells.

• Communications for Statistical Applications and Methods
• /
• v.13 no.3
• /
• pp.777-786
• /
• 2006

Two factorial designs with quantitative factors are called geometrically equivalent if the design matrix of one can be transformed into the design matrix of the other by row and column permutations, and reversal of symbol order in one or more columns. Clark and Dean (2001) gave a sufficient and necessary condition (which we call the 'gCD condition') for two symmetric factorial designs with quantitative factors to be geometrically equivalent. This condition is based on the absolute value of the Euclidean(or Hamming) distance between pairs of design points. In this paper we extend the gCD condition to asymmetric designs. In addition, a modified algorithm is applied for checking the equivalence of two designs.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.217-225
• /
• 1995

This study was conducted to find design factors of spraying device of the boom sprayer for low volume application. Four types of nozzles(standard flat nozzle, drift guard nozzle, even flat nozzle, and hollow cone nozzle) were used for the spray characteristic experiment. Spray patterns of the nozzles were distinguished by the nozzle type, spray distance, and spray direction. The flow rate was proportional to the square root of spray pressure in all nozzles. Increased nozzle height improved spray distribution at reduced pressures and/or increased spacing. Distribution tended to improve as pressure increased within the range of pressures used for fan nozzles.

• Journal of Species Research
• /
• v.6 no.spc
• /
• pp.67-70
• /
• 2017

Three ciliate species, Australocirrus australis (Foissner, 1995) Kumar and Foissner, 2015, Rimaleptus longitrichus ($Vd^{\prime}a{\check{c}}n{\acute{y}}$ and Foissner, 2008) $Vd^{\prime}a{\check{c}}n{\acute{y}}$ and Foissner, 2012, and Frontonia subtropica Pan et al., 2013, that were previously unreported in Korea were collected from terrestrial and marine habitats in Korea. Using live observation and protargol impregnation, the three species were identified using a combination of the following characteristics: Australocirrus australis, the distance between the anterior pretransverse cirrus and the anteriormost transverse cirrus (0.6-2.1% of body length) and the arrangement of the transverse cirri (oblique row); Rimaleptus longitrichus, the arrange of contractile vacuoles and longitudinal ciliary rows anteriorly spaced; Frontonia subtropica, number of somatic kineties (approximately 115 rows) and vestibular kineties (5 rows).

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1550-1552
• /
• 2005

In this paper, we have designed a Fingerprint Recognition System based on the Embedded LINUX. The fingerprint is captured using the AS-S2 semiconductor sensor. To extract a feature vector we transform the image of the fingerprint into a column vector. The image is row-wise filtered with the low-pass filter of the Haar wavelet. The feature vectors of the different fingerprints are compared by computing with the probabilistic neural network the distance between the target feature vector and the stored feature vectors in advance. The system implemented consists of a server PC based on the LINUX and a client based on the Embedded LINUX. The client is a Tynux box-x board using a PXA-255 CPU. The algorithm is simple and fast in computing and comparing the fingerprints.