• IE interfaces
• /
• v.16 no.spc
• /
• pp.14-20
• /
• 2003

This paper presents a multi-criteria decision model and Multi-Criteria Generic Algorithm(MCGA) approach to improve backbone topology by leveraging the Virtual Link(VL) system in an hierarchical Link-State(LS) routing domain. Given that the sound backbone topology structure has a great impact on the overall routing performance in an hierarchical LS domain, the importance of this research is evident. The proposed decision model is to find an optimal configuration of VLs that properly meets two-pronged engineering goals in installing and maintaining VLs: i.e., operational costs and network reliability. The experiment results clearly indicates that it is essential to the effective operations of hierarchical LS routing domain to consider not only engineering aspects but also specific benefits from systematical layout of VLs, thereby presenting the validity of the decision model and MCGA.

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.225-234
• /
• 2018

E-Health allows you to supersede the central patient wireless healthcare system. Wireless Body Sensor Network (WBSN) is the first phase of the e-Health system. In this paper, we aim to understand e-Health architecture and configuration, and attempt to minimize energy consumption and latency in transmission routing protocols during restrictive latency in data delivery of WBSN phase. The goal is to concentrate on polling protocol to improve and optimize the routing time interval and schedule communication to reduce energy utilization. In this research, two types of network models routing protocols are proposed - elemental and clustering. The elemental model improves efficiency by using a polling protocol, and the clustering model is the extension of the elemental model that Destruct Supervised Decision Tree (DSDT) algorithm has been proposed to solve the time interval conflict transmission. The simulation study verifies that the proposed models deliver better performance than the existing BSN protocol for WBSN.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.776-783
• /
• 2022

Since Mechanical, Electrical, and Plumbing(MEP) routing is a repetitive and experience-centered process that requires considerable time and human resources, if automated, design errors can be prevented and the previously required time and human resources can be reduced. Although research on automatic routing has been conducted in many industries, the MEP routing in AEC projects has yet to be identified due to the complexity of system configuration, distributed expertise, and various constraints. Therefore, the purpose of this study is to identify the target subjects for MEP routing automation and the constraints of each subject. The MEP design checklist provided by a CM company and existing literature review were conducted, and target subjects and constraints were identified through process observation and in-depth expert interviews for five days by visiting a MEP design company. The target subjects were largely divided into six categories: air conditioning plumbing, air conditioning duct, restroom sanitary plumbing, heating plumbing, and diagram. The findings from interviews show that work reduction and error reduction has the greatest effect on air conditioning plumbing while the level of difficulty is the highest in air conditioning duct and restroom sanitary plumbing. Major constraints for each subject include preventing cold drafts on air conditioning pipes, deviation in ventilation volume in air conditioning ducts, routing order on restroom sanitary plumbing, and separation distance from the wall on heating plumbing. In this way, subjects and constraints identified in this study can be used for MEP automatic routing.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.77-85
• /
• 2013

Recently, location information based routing protocol has been studied to estimate end-to-end path in wireless ad-hoc network. This protocol assumes all nodes can get heir location information via GPS devices and floods only limited area with routing message through acquired location information. Therefore, this protocol has advantage that can reduce the number of routing message than the existing IP-based routing protocols. In addition, all nodes enabling this protocol must acquire their own location information to participate in the location-based routing. However, recent because of the miniaturization of sensor node, sensor node without GPS function has been launched. Therefore in case of the sensor node that does not know location information, it is impossible to participate in the ad hoc network configuration and location information based routing. In this paper, a virtual location information based routing scheme is proposed for wireless nodes without GPS function to be able to participate in location information based routing within ad hoc network environments consisting of wireless nodes with GPS function and wireless nodes without GPS function. Therefore, the proposed protocol has the advantage that a wireless node without a GPS function is able to participate in ad hoc network configuration and the location information based routing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.183-191
• /
• 2004

Single shortest path routing is known to perform poorly for Internet traffic engineering (TE) where the typical optimization objective is to minimize the maximum link load. Splitting traffic uniformly over equal cost multiple shortest paths in OSPF and IS-IS does not always minimize the maximum link load when multiple paths are not carefully selected for the global traffic demand matrix. However, among all the equal cost multiple shortest paths in the network, a set of TE-aware shortest paths, which reduces the maximum link load significantly, can be found and used by IP routers without any change of existing routing protocols and serious configuration overhead. While calculating TE-aware shortest paths. the destination-based forwarding constraint at a node should be satisfied, because an IP router will forward a packet to the next-hop toward the destination by looking up the destination prefix. In this paper, we present a problem formulation of finding a set of TE-aware shortest paths in ILP, and propose a simple heuristic for the problem. From the simulation results, it is shown that TE-aware shortest path routing performs better than default shortest path routing and ECMP in terms of the maximum link load with the marginal configuration overhead of changing the next-hops.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1068-1075
• /
• 2021

Wireless sensor network (WSN) can be usefully used in battlefields requiring rapid installation and operation by enabling surveillance and reconnaissance using small sensors in areas where any existing network infrastructure is not formed. As WSN uses battery, energy efficiency acts as a very important issue in network survivability. Layer-based routing protocols have been studied a lot in the aspect of energy efficiency. Many research selected LEACH and PEGASIS protocols as their comparison targets. This study examines the two protocols and LECEEP, a protocol designed by combining their advantages, and proposes a new protocol, A-LECEEP, which is more energy efficient than the others. The proposed protocol can increase energy efficiency compared to the existing ones by eliminating unnecessary transmissions with multiple chains configuration.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.199-206
• /
• 2016

This paper describes a simple routing control system. We propose achieving high-speed data transmission without modifying the data frame configuration. To add a routing control signal, called the "labeling signal" in this paper, to the data frame, we use a frequency modulation technique on the transmitted frame. This means you need not change the data frame when you transmit additional signals. Using a prototype system comprising a field-programmable gate array and discrete elements, we investigate the system performance and devise a method to achieve high resolution. A three-channel routing control for a 10 Gb/s data frame was achieved, which confirms the advantages of the proposed system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.138-141
• /
• 1997

In this study, a simulation model is developed to analyze the effects of routing and scale-economy of transmission facilities on the traffic network topology and investment cost changes in a metropolitan telephone network. Computational experiments showed that the wide deployment of bifurcated routing in a dual-homing configuration reduces significantly the traffic network connectivity and the investment cost. Its enhanced version, when combined with the subscriber network cost model, can be used as a prototype cost proxy model for figuring out the access charges in a multi-operator environment.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.301-311
• /
• 2013

This paper proposes a policy-based quality of service (QoS) management framework for adaptive routing decisions. We present an approach considering interior gateway protocol (IGP) for path discovery mechanisms and QoS-aware policies for configuring the network elements. The integration of the aforementioned modules into this policy-based network management (PBNM) system is demonstrated by conducting experiments in a real environment, the hellenic public administration network SYZEFXIS. These experiments combine different traffic conditioning mechanisms through event detectors, consider IP service level agreement mechanisms that interoperate with the PBNM system and analyze the enforcement of IGP and QoS policies. Finally, validation and measurement tools are used to prove the efficiency of this framework. It is shown that this architecture offers significantly increased performance and learning capabilities, while the PBNM system achieves adaptive QoS routing through automated configuration considering the avoidance of suboptimal routing issues or under-performance conditions of the network entities.