• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1015-1024
• /
• 2011

Mobile P2P protocols in ad-hoc networks have gained large attention recently. Although there has been much research on P2P algorithms for wired networks, existing P2P protocols are not suitable for mobile ad-hoc networks because they do not consider mobility of peers. This study proposes a new cluster-based P2P protocol for ad hoc networks which utilizes peer mobility. In typical cluster-based P2P algorithms, each cluster has a super peer and other peers of the cluster register their file list to the super peer. High mobility peers would cause a lot of file list registration traffic because they hand-off between clusters frequently. In the proposed scheme, while peers with low mobility behave in the same way as the peers of the typical cluster-based P2P schemes, peers with high mobility behave differently. They inform their entrance to the cluster region to the super peer but they do not register their file list to the super peer. When a peer wishes to find a file, it first searches the registered file list of the super peer and if fails, query message is broadcasted. We perform mathematical modeling, analysis and optimization of the proposed scheme regarding P2P traffic and associated routing traffic. Numerical results show that the proposed scheme performs much better than or similar to the typical cluster-based P2P scheme and flooding based Gnutella.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1133-1141
• /
• 2009

In this paper, we present a distributed fault-tolerant topology control protocol that configure a wireless sensor network to achieve k-connectivity and (k+1)-coverage. One fundamental issue in sensor networks is to maintain both sensing coverage and network connectivity in order to support different applications and environments, while some least active nodes are on duty. Topology control algorithms have been proposed to maintain network connectivity while improving energy efficiency and increasing network capacity. However, by reducing the number of links in the network, topology control algorithms actually decrease the degree of routing redundancy. Although the protocols for resolving such a problem while maintaining sensing coverage were proposed, they requires accurate location information to check the coverage, and most of active sensors in the constructed topology maintain 2k-connectivity when they keep k-coverage. We propose the fault-tolerant topology control protocol that is based on the theorem that k-connectivity implies (k+1)-coverage when the sensing range is at two times the transmission range. The proposed distributed algorithm does not need accurate location information, the complexity is O(1). We demonstrate the capability of the proposed protocol to provide guaranteed connectivity and coverage, through both geometric analysis and extensive simulation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.243-249
• /
• 2020

With the development of the 4th Industry Revolution and the progress of related technologies, people have been using various services in a more convenient way in their daily lives. Among these technologies, the smart mobility is a service that effectively transports people or packets from the origin to the final destination using a variety of methods/vehicles. With respect to the smart mobility technology, the shuttle service is operational at the final destination. The conventional shuttle operation only takes into account the shuttle operability and does not consider the shuttle-passenger efficiency at all by the one-way routing. Therefore, in this paper, we propose the smart shuttle algorithm that can change the routes to efficiently support boarding passengers. Our proposed scheme consists of 3 algorithms: the shuttle operating algorithm, the re-routable shuttle traveling algorithm, and the passenger-riding algorithm. All those 3 algorithms are effectively co-operated and collaborated for better performance. In-depth experiments were conducted to analyze and to show the superior performance, resulting in an average 23.6% reduction of destination-arrival time per passenger, average 10.37% reduction of shuttle-waiting time per passenger, and average 15.38% decrease of shuttle traveling time per hour. This proves that our smart shuttle traveling scheme reveals the whole remarkable performance, effectively using the re-routable characteristics.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.7
• /
• pp.159-172
• /
• 2016

This paper presents a novel algorithm for searching evacuation paths in indoor disaster environments. The proposed method significantly improves the time complexity to find the paths to the evacuation exit by introducing a light-weight Disaster Evacuation Graph (DEG) for a building in terms of the size of the graph. With the DEG, the method also considers load balancing and bottleneck capacity of the paths to the evacuation exit simultaneously. The behavior of the algorithm consists of two phases: horizontal tiering (HT) and vertical tiering (VT). The HT phase finds a possible optimal path from anywhere of a specific floor to the evacuation stairs of the floor. Thus, after finishing the HT phases of all floors in parallel the VT phase begins to integrate all results from the previous HT phases to determine a evacuation path from anywhere of a floor to the safety zone of the building that could be the entrance or the roof of the building. It should be noted that the path produced by the algorithm. And, in order to define the range of graph to process, tiering scheme is used. In order to test the performance of the method, computing times and evacuation times are compared to the existing path searching algorithms. The result shows the proposed method is better than the existing algorithms in terms of the computing time and evacuation time. It is useful in a large-scale building to find the evacuation routes for evacuees quickly.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.6
• /
• pp.269-277
• /
• 2024

With the advancement of modern IT technologies, the operation of autonomous vehicles is becoming a reality, and route planning is essential for this. Generally, route planning involves proposing the shortest path to minimize travel distance and the quickest path to minimize travel time. However, the quality of these routes depends on the topological characteristics of the road network graph. If the connectivity structure of the road network is not rational, there are limits to the performance improvement that routing algorithms can achieve. Real drivers consider psychological factors such as the number of turns, surrounding environment, traffic congestion, and road quality when choosing routes, and they particularly prefer routes with fewer turns. This paper introduces a simple path algorithm that seeks routes with the fewest turns, in addition to the traditional shortest distance and quickest time routes, to evaluate the characteristics of road networks. Using this simple path algorithm, we compare and evaluate the connectivity characteristics of road networks in 20 major cities worldwide. By analyzing these road network characteristics, we can identify the strengths and weaknesses of urban road networks and develop more efficient and safer route planning algorithms. This paper comprehensively examines the quality of road networks and the efficiency of route planning by analyzing and comparing the road network characteristics of each city using the proposed simple path algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1312-1318
• /
• 2006

One of the common services of telematics is the car navigation that finds the shortest path from source to target. Until now, some routing algorithms of the car navigation do not consider the real-time traffic information and use the static shortest path algorithm. In this paper, we prosed the method to predict the traffic flow in the future. This prediction combines two methods. The former is an accumulated speed pattern, which means the analysis results for all past speeds of each road by classfying the same day and the same time inteval. The latter is the Kalman filter. We predicted the traffic flows of each segment by combining the two methods. By experiment, we showed our algorithm gave better precise predicition than only using accumulated speed pattern that is used commonly. The result can be applied to the car navigation to support a dynamic shortest path. In addition, it can give users the travel information to avoid the traffic congestion areas.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.1-8
• /
• 2020

In order to reach Ultra-Reliable Low-Latency communication, one of 5G aims, Multi-access Edge Computing paradigm was born. The idea of this paradigm is to bring cloud computing technologies closer to the network edge. User services are hosted in multiple Edge Clouds, deployed at the edge of the network distributedly, to reduce the service latency. For mobile users, migrating their services to the most proper Edge Clouds for maintaining a Quality of Service is a non-convex problem. The service migration problem becomes more complex in high mobility scenarios. The goal of the study is to observe how user mobility affects the selection of Edge Cloud during a fixed mobility path. Mobility-Aware Service Migration (MASM) is proposed to optimize service migration based on two main parameters: routing cost and service migration cost, during a high mobility scenario. The performance of the proposed algorithm is compared with an existing greedy algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.116-123
• /
• 2013

In mobile healthcare applications, the reliable transmission of the bio-data is very important. In this article, we present a reliable bio-data transmission technique for mobile healthcare monitoring service at 6LoWPAN multi-hop wireless networks. In particular, we expand IEEE 11073-20601 protocol, and propose the reliable path construction for 6LoWPAN aimed to reliably provide mobile healthcare service over wireless sensor network, using IPv6 network. 6LoWPAN is recognized possibility because it is agree with sensor network by raising Adaptation layer on the MAC layer to transmit IPv6 packets. In this article proposed minimize the algorithm complexity and reliability routing protocol because the 6LoWPAN devices are suitable for low cost, small size and battery that can be used to health care system environment. And detailed procedures and algorithms are presented. We the proposed method to prove the superiority of using NS-3 for compareing with AODV protocol.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.361-371
• /
• 2008

In this paper, the hypercube, hyperpetersen networks, whose degree is increasing in accordance with expansion of number of node and complete binary tree are one-to-one embedded into peterson-torus(PT) network which has fixed degree. The one-to-one embedding has less risk of overload or idle for the processor comparative to one-to-many and many-to-one embedding. For the algorithms which were developed on hypercube or hyperpetersen are used for PT network, it is one-to one embedded at expansion ${\doteqdot}1$, dilation 1.5n+2 and link congestion O(n) not to generate large numbers of idle processor. The complete binary tree is embedded into PT network with link congestion =1, expansion ${\doteqdot}5$ and dilation O(n) to avoid the bottleneck at the wormhole routing system which is not affected by the path length.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.71-78
• /
• 2009

It is very difficult to apply previous security protocols to WSNs(Wireless Sensor Networks) directly because WNSs have resource constrained characteristics such as a low computing ability, power, and a low communication band width. In order to overcome the problem, we proposes a secure group communication scheme applicable to WSNs. The proposed scheme is a combined form of the TEEN(Threshold sensitive Energy Efficient sensor Network protocol) clustering based hierarchical routing protocol and security mechanism, and we assume that WSNs are composed of sensor nodes, cluster headers, and base stations. We use both private key and public key cryptographic algorithms to achieve an enhanced security and an efficient key management. In addition, communications among sensor nodes, cluster headers, and base stations are accomplished by a hierarchical tree architecture to reduce power consumption. Therefore, the proposed scheme in this paper is well suited for WSNs since our design can provide not only a more enhanced security but also a lower power consumption in communications.