• Tunnel and Underground Space
• /
• v.15 no.6 s.59
• /
• pp.425-431
• /
• 2005

A series of geotechnical surveys and in-situ tests were carried out to evaluate the stability of underground mine cave in an abandoned coal mine. After the closure of the mine, the underground mine drifts have been utilized for a tourist route since 1999. The dimension of the main cave is 5m width, 3m height and 230m length. The surrounding rock mass of the cave is consist of black shale, coal and limestone. Also, the main cave is intersected by two fault zone. Detailed field investigations including Rock Mass Rating(RMR), Geological Strength Index(GSI) and Q classification were performed to evaluate the stability of the main cave and to examine the necessity of reinforcement. Based on the results of rock mass classification and numerical analysis, suitable support design was recommended for the main cave. RMR and Q values of the rock masses were classified in the range of fair to good. According to the support categories proposed by Grimstad & Barton(1993), these classes fall in the reinforcement category of the Type 3 to Type 1. A Type 3 reinforcement category signifies systematic bolting and no support is necessary for the Type 1 case. From the result of numerical analysis, it was inferred that additional support on the several unstable blocks is required to ensure stability of the cave.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• Korean Journal of Veterinary Research
• /
• v.12 no.1
• /
• pp.71-75
• /
• 1972

Due to the fact that an inactivated anthrax vaccine may show no or lower immunogenicity and stability, a number of spore vaccines were exclusively used worldwide. In these studies non or less allergic strain of anthrax bacillus was selected and made a capsulated vegetative organisms. Anthrax organisms of a virulent strain were cultivated on sodium bicarbonate medium with or without adding I-alanine in which B. anthracis grew luxuriantly without forming spores. Inactivation of the organisims was carried out at $37^{\circ}C$ water bath for 3 days after the bacterial culture was mixed with formalin in a final concentration of two per cent. Aluminum hydroxide gel was added to the mixture of anthrax and blackleg bacterin. Guinea pigs were injected with the vaccine via subcutaneous or intramuscular route and challenged after three weeks, and the possibilities of protection was tested. Throughout the studies, the vaccines possibly protected the vaccinated guinea pigs more than 80 per cent compared to that of the controls. This experimental results strongly suggest that the vaccine may possibly applicable to the prevention of bovine anthrax and blackleg.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.406-410
• /
• 2016

Carbon-coated sodium iron pyrophosphate ($Na_2FeP_2O_7$) was prepared by a simple and low-cost pyro-synthesis route for further use as the cathode for Na-ion batteries. The X-ray diffraction (XRD) pattern of the sample annealed at $650^{\circ}C$ confirmed the pure triclinic phase of $Na_2FeP_2O_7$. Electron microscopy studies revealed a cross linked plate shape morphology of the $Na_2FeP_2O_7$ sample. When tested for application in Na-ion battery, the $Na_2FeP_2O_7$ cathode showed two redox pairs in the potential window of 2.0-4.0 V. The cathode registered initial discharge and charge capacities of 80.85 and 90 mAh/g, respectively, with good cycling performance.

• Journal of Life Science
• /
• v.11 no.4
• /
• pp.385-391
• /
• 2001

Filamentous hemagglutinin (FHA) is considered as an essential immunogenic component for incorporation into acellular vaccines against Bordetella pertussis, the causative agent of whooping cough. Classically, antipertussis vaccination has employed an intramuscular route. An alternative approach to stimulate mucosal and systemic immune responses is oral immunization with recombinant live vaccine carrier strains of Salmonella typhimurium. An attenuated live Salmonella vaccine sgrain($\Delta$cya $\Delta$crp) expressing recombinant FHA(rFHA) was developed. Stable expressionof rFHA was achieved by the use of balanced-lethal vector-host system. which employs an asd deletion in the host chromosome to impose in obligate requirement for diaminopimelic acid. The chromosomal $\Delta$asd mutation was complemented by a plasmid vector possessing the asd$^{+}$ gene. A 3 kb DNA fragment encoding immuno dominant regionof FHA was subcloned in-frame downstream to the ATG translation initiation codon in the multicopy Asd$^{+}$ pYA3341 vector to create pYA3457. Salmonella vaccine harboring pYA3457 expressed approximately 105kDa rFHA protein. The 100% maintenance of [YA3457 in vaccine strain was confirmed by stability examinations. Additionally, a recombinant plasmid pYA3458 was constructed to overpress His(8X)-tagged rFHA in Essherichia coli. His-tagged rFHA was purified from the E. coli strain harboring pYA3458 using Ni$^{2+}$-NTA affinity purification system.>$^{2+}$-NTA affinity purification system.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.62-70
• /
• 2005

In this paper, we present an architecture for supporting QoS multicast routing in mobile ad-hoc networks. The proposed architecture consists of three parts as follows. The first part is a mobility-based clustering as underlying structure for supporting stable multicast services. In the second part, a framework which can support and evaluate the stability of route and network for supporting QoS routing is presented. In the third part, we describe a method which uses two structures of the first and second parts for supporting QoS multicast routing services. The performance evaluation of our proposed architecture is accomplished via modeling and simulation using the Optimized Network Engineering tool(OPNET).

• Advances in materials Research
• /
• v.1 no.3
• /
• pp.205-219
• /
• 2012

Co-Re alloy development is prompted by the search for new materials for future gas turbines which can be used at temperatures considerably higher than the present day single crystal Ni-based superalloys. The Co-Re based alloys are designed to have very high melting range. Although Co-alloys are used in gas turbine applications today, the Co-Re system was never exploited for structural applications and basic knowledge on the system is lacking. The alloy development strategy therefore is based on studying alloying additions on simple model alloy compositions of ternary and quaternary base. Various strengthening possibilities have been explored and precipitation hardening through fine dispersion of MC type carbides was found to be a promising route. In the early stages of the development we are mainly dealing with polycrystalline alloys and therefore the grain boundary embrittlement needed to be addressed and boron addition was considered for improving the ductility. In this paper recent results on the effect of boron on the strength and ductility and the stability of the fine structure of the strengthening TaC precipitates are presented. In the beginning the alloy development strategy is briefly discussed.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.1
• /
• pp.22-27
• /
• 2006

Objective : The purpose of this study is to investigate the clinical results of anterior and posterior stabilization by one stage posterolateral approach for the unstable fracture of thoracolumbar and lumbar spine. Methods : By posterolateral approach with curved skin incision, unilateral facet and pedicle were removed. Through this route, corpectomy was performed, and then this space was replaced with mesh cage filled up with autologous bone graft. Both side pedicle screw fixation was followed to upper and lower levels. Results : Six of seven patients of this study showed neurological improvement. The other one patient showed no neurological change. One patient had postoperative infection, another patient had postoperative kyphosis. The other patient had epidural hematoma on operation site after surgery. And all patinets on this study made to have spinal stability except one patient happened postoperative kyphosis. Conclusion : In the unstable fracture of thoracolumbar and lumbar spine, one stage anterior and posterior stabilization and fusion by posterolateral approach seems to be an effective procedure, if we have more care and supplementation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.244.2-244.2
• /
• 2011

We introduce a novel and robust method for the preparation of nanocomposite multilayers, which allows the excellent photoluminescent (PL) properties as well as the accurate control over the composition and dimensions of multilayers. By exchanging the oleic acid stabilizers of CdSe@ZnS quantum dots (QDs) synthesized in organic solvent with 2-bromo-2-methylpropionic acid (BMPA) in the same solvent, these nanoparticles were be alternately deposited by nucleophilic substitution reaction with highly branched poly(amidoamine) dendrimer (PAMA) through layer-by-layer (LbL) assembly process. Our approach does not need to be transformed into the water-dispersible nanoparticles with electrostatic or hydrogen-bonding groups, which can deteriorate their inherent properties, for the built-up of multilayers. The nanocomposite multilayers including QDs exhibited the strong PL properties achieving densely packed surface coverage as well as long-term PL stability under atmospheric conditions in comparison with those of conventional LbL multilayers based on electrostatic interaction. Furthermore, we demonstrate that the flexible multilayer films with optical properties can be easily prepared using nucleophilic substitution reaction between bromo and amino groups in organic media. This robust and tailored method opens a new route for the design of functional film devices based on nanocomposite multilayers.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.118-125
• /
• 2018

Herein we report on the selective synthesis and direct growth of nanostructures using an aqueous chemical growth route. Specifically, Al-doped ZnO (AZO) nanoflakes (NFs) are vertically grown on indium tin oxide (ITO) coated flexible polyethylene terephthalate (PET) sheets at low temperature and ambient environment. The morphological, optical, and electrical properties of the NFs are investigated as a function of the Al content. Furthermore, these AZO-NFs are integrated into perovskite solar devices as the electron transport layer (ETL) and the fabricated devices are tested for photovoltaic performance. It was determined that the doping of AZO-NFs significantly increases the performance metrics of the solar cells, mainly by increasing the short-circuit current of the devices. The observed enhancement is primarily attributed to the improved conductivity of the doped AZO-NF, which facilitates charge separation and reduces recombination. Further, our flexible solar cells fabricated through this low temperature process demonstrate an acceptable reproducibility and stability when exposed to a mechanical bending test.