• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.486-495
• /
• 2002

In this paper, we propose a delay reduction method for frame-based packet transmit scheduling algorithm. A high-speed network such as ATM network has to provide some performance guarantees such as bandwidth and delay bound. Framing strategy naturally guarantees bandwidth and enables simple rate-control while having the inherently bad delay characteristics. The proposed delay reduction method uses the same hierarchical frame structure as HRR (Hierarchical Round-Robin) but does not use the static priority scheme such as round-robin. Instead, we use a dynamic priority change scheme so that the delay unfairness between wide bandwidth connection and narrow bandwidth connection can be eliminated. That is, we use FIFO (First-In First-Out) concept to effectively reduce the occurrence of worst-case delay and to enhance delay distribution. We compare the performance for the proposed algorithm with that of HRR. The analytic and simulation results show that HFIFO inherits almost all merits of HRR with fairly better delay characteristics.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.2
• /
• pp.91-100
• /
• 2011

The Triple Data Encryption Algorithm (Triple DES) is an international standard of block cipher, which composed of two encryption processes and one decryption process of DES to increase security level. In this paper, we proposed a Differential Fault Analysis (DFA) attack to retrieve secret keys using reduction of last round execution for each DES process in the Triple DES by fault injections. From the simulation result for the proposed attack method, we could extract three 56-bit secret keys using exhaustive search attack for $2^{24}$ candidate keys which are refined from about 9 faulty-correct cipher text pairs. Using laser fault injection experiment, we also verified that the proposed DFA attack could be applied to a pure microprocessor ATmega 128 chip in which the Triple DES algorithm was implemented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.575-578
• /
• 2000

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation for the die wear is too hard because the prediction of the die wear is determined with many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard's wear model in order to reduce the rapid wear rate that is generated for the backward extrusion product exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat, angle, and round of the punch nose part. As the flat and angle of the punch nose are larger, the surface expansion is reduced. and, the wear rate is decreased according to the reduction of the punch round. These results obtained through this study are applied to the real manufacturing process, it is implemented the reduction of the wear rate.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.11-24
• /
• 2016

OBJECTIVES : This study aims to review a plan to reduce the shoulder width of a deformed round-trip two-lane highway with low traffic volume. METHODS : Installation of a passing lane on a round-trip two-lane (one-way one-lane) highway, and reduction of a shoulder for a round-trip four-lane highway. RESULTS : It is necessary to establish a design criterion for various highways, because the plan to reduce the lane or shoulder width of a highway with low traffic volume was analyzed to have an economic efficiency of 6.8~7.0%. CONCLUSIONS : It is necessary to seek for a plan to establish a national trunk net early by efficiently using the limited financial resources to cope with the traffic demand elastically.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1702-1707
• /
• 2007

The reduction of pipe-thickness induced by flow accelerated corrosion (FAC) is one of the most serious problems on the maintenance of piping system in nuclear power plants (NNP). If the thickness of a pipe component is reduced below the critical level, it cannot sustain pressure and consequently results in leakage or rupture. For this reason, wall thinning by FAC has been inspected in secondary side piping systems in NPPs. In this research Round Robin Test (RRT) was conducted to verify confidence of wall thinning measurement system in NPP. 12 inspectors from 3 companies participated and 23 specimens were used according to standard practice in RRT. The gage R&R analysis was introduced in regard to repeatability and reproducibility that are affected to measurement system errors. Confidence intervals of thickness measurement system were obtained.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.85-92
• /
• 2008

Strength of logs and round posts is compared and analyzed to estimate the strength of the incised Larix round posts treated with CCA in this paper. There is no significant difference in MOR of logs and round posts. However, in the incised Larix round posts treated with CCA MOE is decreased to about 9%, and there is 29% reduction in MOR as strength ratio is 0.71. When calculating the allowable bending stress of incised round type round posts, not in nominal 2-in timbers, an adjustment factor for MOE and bending strength is proposed as 0.91 and 0.71, respectively. Logs, round posts and the incised Larix round posts treated with CCA do not show significant difference in nail withdrawal load. There is almost no difference between incised Larix round posts treated with CCA and round posts in the shear strength of bolted joint. When calculating the allowable shear stress of bolted joint, it is conformed that considering the application of incising factor is not necessary.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.259-265
• /
• 2007

The technical committee of Soil Dynamics and Geotechnical Earthquake Engineering of Korean Geotechnical Socity has conducted Round Robin Test(RRT) on seismic ground response analyses in 2007. Total 14 participating teams were given exact same soil information of three sites and three input ground motions including two recorded ground motions and one synthetic ground motion. Each team selected its own analysis method and approaches to perform ground response analyses. There were equivalent linear, nonlinear total stress, and nonlinear effective stress approaches, which could be selected. The results from RRT were systematically analyzed and dispersion and variation due to analysis methods, input ground motions, shear velocity profiles, shear modulus reduction curves, damping curves, and other input data are reported by the companion papers.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.240-246
• /
• 2003

In this paper, we propose the fast image retrieval method based on object regions using bidirectional round filter in the wavelet transform region. A conventional method that extracts feature vectors on the whole of subband is reduced retrieval efficiency, because of unnecessary background information. The proposed method that extracts feature vectors on the only object region of subband by using bidirectional round filter improve retrieval efficiency, because of removing of background information. And it certainly maintains retrieval efficiency in case of reduction of feature vectors according to color information. Consequently, the retrieval efficiency is improved with 2.5%∼5.3% values, which have a little changes according to characteristics of image.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.180-187
• /
• 2004

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation fur the die wear is too hard because the die wear is caused by many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard wear model in order to reduce the rapid wear rate that is generated for the backward extruded products exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat diameter, angle, and round of the punch nose part. As the flat diameter and angle of the punch nose are larger, the surface expansion is reduced and the wear rate is decreased according to the reduction of the punch round. These results obtained through this study can be applied to the real manufacturing process.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4
• /
• pp.1-13
• /
• 2014

This study aims to show the risk reduction effects of round-the-clock trading environment. We analyse the trading results of the currency futures contracts in CME Globex which are open 23 hours a day. These include Euro FX, Japanese Yen, Australian Dollar, and British Pound from January 2005 to August 2013. We generate new price series using only daytime prices during about 7-hour period. This hypothetical "G" data series may have greater gap risk than the original "R" data series. Empirical results show the trading risk reduction effects, that is R data series have higher profits and lower risks than G data series.